• Korean Chemical Engineering Research
• /
• v.47 no.2
• /
• pp.230-236
• /
• 2009

Sewage sludge cake(SSC) is seriously concerned because ocean dumping, which is the cheapest treatment method now, will be banned in 2012. On the basis of this reason, recycling of SSC is emphasized to convert the treatment method. One of the method to recycling SSC could be carbonization process which also can be reduced greenhouse gas effectively. And carbonization residue of SSC produced by carbonization process can become a renewable energy source. However, carbonization process has not been evaluated by considering basic operating data such as heating value, yield and fuel ratio. In this study, the basic characteristics of SSC such as proximate analysis, elementary analysis and heating value are analyzed. In carbonization process, the effect of carbonization temperature and time on the residue of SSC are estimated. And the analysis is carried out to obtain basic properties of the residue of SSC. From the result of chemical composition of SSC residue, there is 27% of phosphate in SSC. Phosphate will take a role of reductant to convert from hazardous substance to non-hazardous material. As increased carbonization temperature and time, heating value and yield are decreased but fuel ratio(fixed carbon/volatile combustible) of the residue is increased. In the carbonization process, the optimum temperature and time in carbonization test for SSC can be decided by $250^{\circ}C$ and 15 min, respectively. However, the carbonization residue of SSC can not be deserved to use one of renewable energy sources because the heating value at the optimum condition is relatively low. Hence, it is desirable that SSC can be mixed with other organic waste to carbonize.

• Proceedings of the Korean Journal of Food and Nutrition Conference
• /
• 2000.05a
• /
• pp.5-7
• /
• 2000

국내에서의 식이섬유의 이용은 대부분 저분자량의 수용성 식이섬유를 이용한 음료형태가 주류를 이루고 있으며, 밀기울, 귀리, 옥수수 껍질 등으로 부터 얻는 불용성 식이섬유는 제과 및 제빵등에 이용되어 오고 있다. 수용성 식이섬유는 혈중 콜레스테롤을 저하시키며, 불용성 식이섬유는 변비예방과 장기능 증진효과가 탁월한 것으로 알려져 있다. 그러므로, 대장암과 변비같은 장질환 환자가 날로 증가하고 있는 상황에서 국내산 미이용 자원으로부터 불용성 식이섬유의 기능성 향상과 활용기술을 개발하는 것은 식품산업적 가치가 크다고 할 수 있다. 또한, 국내에서 소비되고 있는 폴리덱스트로스와 올리고당과 같은 기능성 당류의 대부분이 외국에서 수입하여 국내에 보급되고 있기 때문에 큰 외화지출이 되고 있다. 따라서 본고에서는 국내산 미곡 부산물인 밀기울 식이섬유 세포벽의 불용성 구조를 수용성으로 변화시킬 수 있는 변형기술과 얻어진 수용성 식이섬유 소재의 특성을 소개하고자 한다. 즉, 밀기울 세포벽의 수용화를 위한 가공처리는 압출성형 공정에 의하여 실시하였으며, 수용화가 수반되는 압출성형 조건에 따른 식이섬유 소재의 이화학적 특성과 수용화가 일어난 세포벽 성분의 분해기작에 대한 연구결과를 정리하였다. 그리고, 현행 올리고당과 식이섬유의 산업적 생산공정에서 문제점으로 대두되고 있는 효소처리, 산성하에서의 감압가열, 고점도 원료물질의 이송, 생물공학적 공정제어, 반응시간, 잔여 효소의 불활성화 및 재활용, 제조원가 상승 등과 같은 것을 해결하거나 개선할 수 있는 효율적인 압출반응공정의 조건과 생산된 소재 glucooligosaccharide, fructooligosaccharide, galactooligosaccharide 등의 특성에 대하여 논하여 보기로 한다.경우가 많지 않다. 또한 그 발생 경위나 원인요소에 대해서는 일반에게 공개되지 않고 있어, 우리가 실천하여 식중독을 예방할 수 있는 정보가 함께 제시되지 못하는 형편이다. 따라서 본 고에서는 최근 수년간 외국에서 학교급식을 비롯한 집단급식 등에서 발생한 식중독 사례를 중심으로 고찰, 분석하였다. 이로부터 식중독 발생에 기여한 주요 원인을 찾아내고 여기서 얻어지는 교훈을 토대로 식중독 발생을 예방 및 최소화할 수 있는 실천적 대처 방안을 모색해 보고자 한다.중의 E. coli O157:H7이 연관되어있다는 보고도 있다. 목장 방문시 원유를 마신 어린이에서 HUS가 유발하였고, 균분리 결과, 농장의 소와 어린이에서 유사한 E. coli O157:H7이 분리된 바 있다. 본 연자들은 베로톡신 유형, plasmid profiles, RFLP 분석, phage type을 기초로하여 소에서 분리된 E. coli O157:H7이 사람유래주와 매우 유사함을 확인하였다.mm 및 2-6mm 난포에서의 101개(67.8%) 및 47개(50.0%) 보다 매우 낮게 나타났다. 전체 회수 난포란수도 4등급이 59.1%(149/252)로써 1, 2, 3등급의 0.4% (1/252), 7.6%(19/252) 및 32.9%(83/252)보다 높게 나타났다. 1회 평균 회수 난포란은 $\leq$2mm 난포에서 4.8$\pm$3.7개로써 2-6mm(3.0$\pm$3.4개) 및 $\geq$6mm (0.3$\pm$0.6개)보다 높았으며, 1회당 평균 8.1$\pm$5.1개의 난포란을 회수하였다. investigation can be separated into sa

• Korean journal of food and cookery science
• /
• v.20 no.6 s.84
• /
• pp.607-613
• /
• 2004

The purpose of this study was to investigate the quality characteristics of functional cookies made with potato peels (cortex layer) containing high amounts of glycoalkaloid. Cookies were processed by mixing ratios of 10, 15 and $20\%$ potato peel relatively to flour. The spread ratio of the cookies was increased with increasing potato peel addition. Texture measurement for the cookies on substituting $10\%$ of flour for potato peel showed a decreased hardness, but the cohesiveness and springiness were increased compared to the control and other ratios. The glycoalkaloid contents of the cookies on substituting 10, 15 and $20\%$ of the flour forpotato peel were 6.27, 9.40 and 12.54mg, respectively, which according to the USAD guidelines are safe amounts for the human body, and also enough for making functional cookies. In the sensory evaluations, the cookies with $10\%$ of the flour substituted for potato peel had the highest scores in flavor, taste, appearance and texture.

• Korean Chemical Engineering Research
• /
• v.51 no.6
• /
• pp.700-708
• /
• 2013

Pyroprocessing has been developed for the purpose of resolving the current spent nuclear fuel management issue and enhancing the recycle of valuable resources. Pyroprocessing has been developed with the dry technologies which are performed under high temperature conditions excluding any aqueous processes. Pyro-processes which are based on the electrochemical principles require pretreatment processes and a voloxidation process is considered as a pretreatment step for an electrolytic reduction process. Various kinds of gas conditions are applicable to the voloxidation process and the understanding of Cs behavior during the process is of importance for the analyses of waste characteristics and heat load on the overall pyroprocessing. In this study, the changes of chemical compounds with the gas conditions were calculated by analyzing gas-solid reaction behavior based on the chemical equilibria on a Cs-Te-O system. $Cs_2TeO_3$ and $Cs_2TeO_4$ were selected after a Tpp diagram analysis and it was confirmed that they are relatively stable under oxidizing atmospheres while it was shown that Cs and Te would be removed by volatilization under reducing atmosphere at a high temperature. This work provided basic data for predicting Cs behavior during the voloxidation process at which compounds are chemically distributed as the first stage in the pyroprocessing and it is expected that the results would be used for setting up material balances and related purposes.

• Resources Recycling
• /
• v.15 no.5 s.73
• /
• pp.47-51
• /
• 2006

The total amount of ash generated from the municipal solid waste incineration(MSWI) in Korea was approximately 420,000 tons in 2005 including 68,000 tons of fly ash. Fly ash from MSWI generally contains high amount of CaO (upto ${\sim}50%$) due to the treatment of flue gas by spraying CaO-base materials. Currently, most of fly ash generated is finally ended up with specially designed landfill sites and only less then 20% of fly ash is recycled. In the present work, preparation of $CaCO_3$ from the MSWI ny ash was studied to promote the fly ash recycling. Fly ash obtained from the dust collector in stoker-type MSWI is used to selectively dissolve CaO by using the sugar solution. Then, $CO_2$ gas was passed through the dissolved solution to pro- duce $CaCO_3$ powder. The optimum conditions for CaO dissolution were solid content 10%, reaction time 15 minutes, sugar concentration $10{\sim}15%\;and\;pH\;10.5{\sim}11.0$. The high grade $CaCO_3$ powder was obtained and the experimental conditions are also discussed.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.4 no.1
• /
• pp.81-88
• /
• 2009

This study has shown the tendency to enhance Sand Flux, a device of separating screening the foreign matter, for the recycling of construction waste possible to improve the quality of wet type production system meaningfully as part of research. As a result of experiment on the basic material properties, this study had a tendency to improve the quality and performance significantly in case of absolute surface dried density, 0.08mm sieve throughput, volume of clay lumps, and content of organic foreign matter. In addition, as a result of examining the quality characteristics of mortar, this study has shown the tendency that the flow and compressive strength more increased than the mortar using RS-II by utilizing RS-VI recycled sand produced finally through the device Sand Flux. As for the shrinkage properties, this study has shown the character the generation rate of crack of mortar using RS-IV recycled sand produced finally through the device Sand Flux.

• Journal of Animal Environmental Science
• /
• v.17 no.3
• /
• pp.181-188
• /
• 2011

With an increasing livestock population, animal manure production has been steadily increasing in Korea. This trend has forced farmers to spend more money for animal manure treatment in their farm. Therefore, research utilizing animal manure as a renewable resources has become increasingly important. The purpose of this study was to develop a stable advanced wastewater treatment system can be applied to conventional animal wastewater treatment processes and evaluate its contribution to reduce effluent discharge volume by recycling as flushing water. AOP (advanced oxidation process) process improved wastewater treatment efficiency in terms of color, suspended solids (SS) and chemical oxygen demand (COD). Due to the addition of Hydrogen peroxide ($H_2O_2$), pathogens, Salmonella and E. coli, reduction was accomplished. To enhance ozone treatment effect, three levels of ozone test on secondary effluent of pig slurry purification system were conducted. At the level of 5 g/hr, 6.7 g/hr and 8.4 g/hr color of secondary effluent of pig slurry purification system were decreased from 2,433 to 2,199, 2,433 to 1,980 and 2,433 to 243, respectively.

• Clean Technology
• /
• v.10 no.2
• /
• pp.61-72
• /
• 2004

In this study, aqueous/semi-aqueous cleaning agents which consist of organic solvent, surfactant, cosurfactant, and water were developed by changing formulation parameters such as organic solvent type and contents, surfactant type and contents, and cosurfactant/surfactant(A/S) ratio, etc.. And physical properties and flux removal of the formulated cleaning agents have been evaluated. Also, the performance of oil-water separation from the rinse water contaminated during the cleaning process was evaluated for its recycling. The formulated cleaning agents in this work expected to have good penetration because of their low viscosity and low surface tension values of 30.2~32.5 dyne/cm. The flux removal with the terpene type cleaning agent was higher than that with hydrocarbon type cleaning agent and two commercial products (CPA(commercial product A), CPB(commercial product B)). And the performance of oil-water separation by gravity settling from the rinse water contaminated with formulated cleaning agent and soils was shown to be very good. The cleaning agents developed in this work were applied to surface mounting technology(SMT) cleaning process for manufacturing electronic parts at L electronic company. As a result, the newly developed cleaning agents showed two times better cleaning speed for removal of solder cream than the conventional ond containing ethanol and IPA(isopropyl alcohol). In addition, malodor and VOC problems generated by the previous organic cleaning agents have been solved in the manufacturing field through introduction of the non-volatile and environmental-friendly cleaning agents to the field.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.5
• /
• pp.494-500
• /
• 2006

Life Cycle Assessment(LCA) is an environmental assessment tool for evaluating environmental burdens associated with products, processes and activities from the raw material acquisition stage to the end-of-life stage. End-of-life stage as well as other processes requires a reliant database in order to increase the confidence in the LCA results. In this study, the flow of Personal Computer(as PC) in the end-of-life stage was examined and the database of two scenarios has been established, i.e. one is part reuse and the other is no part reuse, in the end-of-life phase of PC. Also, key environmental issues were identified by carrying out LCA on a PC in the end-of-life phase for eight environmental impact categories. The 'ozone layer depletion' contributes the highest environmental impact due to generation of $Cl_2$ gas during the incineration of waste plastics. In addition, the scenario 1(part reuse) is more environmentally sound than the scenario 2(no part reuse) when comparing two scenarios.

• Journal of the Korea Concrete Institute
• /
• v.14 no.4
• /
• pp.540-548
• /
• 2002

The purpose of this study is to analyze the application of oyster shells (OS) as aggregates for concrete. For this purpose, five reference mixes with W/C ratios of 0.4 ∼0.6 at intervals of 0.05 were used. The replacement proportion of OS was varied with ratios of 0, 10, 30, 50 and 100％ by volume of fine or coarse aggregate in the reference mixes. OS was washed and crushed for using as aggregates. New chemical reaction between crushed OS aggregate and cement paste was tested through XRD and SEM analysis. Two strength properties (compressive and flexural) were considered. Strength tests were carried out at the ages of 1, 3, 7, 14 and 28 days. The variations of workability, air content and density, drying shrinkage of the specimens with different proportions of OS were also studied. Finally, the hollow concrete block using OS as a substitute material for fine aggregate was made for testing the application of OS. Experimental results showed that my new chemical reaction did not occur due to mixing OS in concrete. The workability and strengths decreased with increase in proportion of OS. The same trend was observed in density and unit weight, but air content increased due to the inherent pores in OS, which showed a possibility to produce light weight concrete with low strength by using OS as coarse aggregates for concrete. Tests on hollow concrete block showed that the compressive strength and absorption ratio were satisfied with quality requirements when the fine aggregate was substituted with OS up to 50％ in volume.