• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.5C
• /
• pp.211-220
• /
• 2012

Coarse granular materials such as gravel, rubble is used as major fill materials in earth structures of railway, road and dam. Therefore, it is essential to accurately evaluate properties of these materials for reasonable design and construction. In the precedent study, we built large triaxial testing system and verified system compliance with a focus on the dynamic properties. And we could secured the reliability of the system. In this study, the cyclic triaxial tests were performed in various experimental conditions on coarse granular material. Two series of parallel graded samples are prepared by mixing crushed rock. The influence of grain size, loading pattern, loading frequency, and fine contents were analyzed and discussed.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.23 no.3
• /
• pp.51-57
• /
• 2019

Post curing effects are estimated by specimen tests. Propellant specimen accelerated aging tests are performed when post curing is estimated to be complete and the coefficients of Arrhenius aging equations are acquired. Simulated motors with cylindrical grain are designed and fabricated to confirm the application. Accelerated aging tests are conducted, and aged properties are measured and estimated for the inner bore, center and bond parts of the grain. The measured aging ratios of the modulus are compared with the ones predicted by the equations. As the results, the accelerated aging equations predict well the propellant aging trends; however, some differences are observed at the bond part. Therefore, the specimen extraction part must be carefully chosen to suit the test purpose when a rocket motor grain is used for the aging test.

• Journal of the Korean GEO-environmental Society
• /
• v.23 no.5
• /
• pp.5-13
• /
• 2022

In this study, dynamic characteristics and liquefaction resistance characteristics of silica sand which is used to simulate sandy layer were conducted using the cyclic triaxial test according to the relative density difference. The difference in liquefaction resistance with the relative density was confirmed through the test results, which the relative density conditions were changed to 40%, 60%, and 80%, and the cyclic resistance ratio (CRR) curve of the silica sand was obtained. In addition, in order to examine the validity of the liquefaction resistance ratio (CRR) curve, artificial silica sand ground was created, and liquefaction potential was evaluated through the simple assessment method and the detailed assessment method, and the safety factors of each were compared.

• Composites Research
• /
• v.15 no.6
• /
• pp.30-37
• /
• 2002

A stiffness model has been proposed to predict elastic constants of twisted yam composites. The model is based upon the unit cell structure, the coordinate transformation, and the volume averaging of compliance constants for constituent materials. For the correlation of analytic results with experiments, composite samples of various yam twist angles were tested, and strength and Young's modulus under tensile, compressive, and shear loading have been obtained. The sample was fabricated by the RTM process using glass yarns and epoxy resin. The correlations of elastic constants showed relatively good agreements. The model provides the predictions of the three-dimensional engineering constants, which are valuable input data for the analytic characterization of textile composites made of twisted yam.

• Applied Chemistry for Engineering
• /
• v.20 no.1
• /
• pp.67-74
• /
• 2009

Nowadays, recycling of recycled aggregates from the waste concrete is seriously demanded for the protection of environment and the shortage of aggregates owing to the large scale construction project. In this study, for the development of polymer composite recycling recycled aggregates from the waste concrete, twenty five specimens of the polymer composite were prepared with the five levels of replacement ratios of recycled aggregates (0, 25, 50, 75, 100%) and polymer-cement ratios (0,5, 10, 15, 20%), respectively. For the evaluation of the performance of polymer composite specimens, various physical properties such as compressive and flexural strengths, water absorption, hot water resistance, total pore volume and porosity were investigated. As a result, physical properties of polymer composite were remarkably improved with an increase of polymer cement ratios, but greatly decreased with the replacement ratios of recycled aggregates.

• Food Science of Animal Resources
• /
• v.20 no.4
• /
• pp.264-271
• /
• 2000

정육 대체물질의 첨가에 따른 효과를 살피기위해 건조 소 혈장 단백질을 단계별로 높이면서 제조한 비엔나 소시지의 물성적 특성 드을 경시적으로 고찰 비교하였다. 수율은 방냉후 축정된 것으로 81.60~84.88% 범위이며 대조구와 D-2, D-3간의유의적인 차이를 보였다. (P<0.05). 조직의 부분적인 연화 정도는 대조구에 비해 비교구에서 소 혈장 단백질의 첨가수준이 높은 시럼구에서 높았고 열 매체에 의한 영향은 boiled>microwave>fried의 순이 었다. 겔강도와 경도는 대조구와 비교구 사이, 수직 측정과 수평 측정 사이, 저장기간에 따라 유의적인 차이를 볼 수 있었다.(P<0.05), 전단 강도는 수직측정보다는 수평측정이 높은 수치를 보이고 initial에서 대조구와 비교구 사이 차이가 적게 나타나나 40일 저장한 것에서는 차이 값이 높았다. 전단 경도에 있어서는 initial 에 비해 10일 , 40일 에는 감소함을 보이나 수칙측정과 수평측정간 차이를 보였다 L 값은 시험구간과 저장기간에 의해서도 안정함을 보이며 a값은 대조구에 비해 비교구에서 감소함을 보이나 10일 40일 저장된 것에서 증가함을 보이고, b값은 시험구간 사이 비슷한 수준이나 저장기간에 따라서는 감소를 보였다. 기호성 평가에서 색상, 풍미, 조직감은 시험 제품 사이에 차이를 보이고 저장기간에 의해서는 약간의 감소를 보이며 천제적인 수용도는 대조구가 가장 높은 점수였다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.1
• /
• pp.73-78
• /
• 2010

Estimation of tensile properties measurement uncertainty of material was carried out. Sources of uncertainty affecting the measurement of tensile properties were classified and analyzed. The models for uncertainty evaluation of measurands to be determined from tensile test, such as elastic modulus, yield strength and tensile strength, were suggested and derived from the mathematical relations, corresponding to the respective measurands, and the measuring quantities by calculating each sensitivity coefficient of the quantities. Based on these models, the uncertainty of the tensile properties was evaluated from the experimental data of SUS316LN determined according to ISO 6892.

• Composites Research
• /
• v.18 no.3
• /
• pp.1-6
• /
• 2005

Carbon nanofiber exhibits superior and of ien unique characteristics of mechanical, electrical, chemical and thermal properties. Despite of the excellent properties of carbon nanofiber, the properties of carbon nanofiber filled polymer composites were not increased largely. The reason is that it is still difficult to ensure the uniform dispersion of carbon nanofiber in a polymer matrix. In this study, for improvement of the mechanical properties of composites, carbon nanofiber reinforced hybrid composites was investigated. For the dispersion of carbon nanofiber. solution blending method using ultrasonic was used. Dispersion of carbon nanoifiber was observed by scanning electron microscope (SEH). Mechanical properties were measured by universal testing machine(UTM).

• Journal of the Korean Society of Clothing and Textiles
• /
• v.25 no.10
• /
• pp.1809-1820
• /
• 2001

본 연구에서는 모 직물의 접착심과의 접착 후, 프레싱 처리 후, 드라이클리닝 처리 후 프레스로 처리한 실제의 의복의 관리와 생산 면에서 접할 수 있는 직물 변화에 대하여 물성 변화를 살펴보았다. 겉감으로는 신사복 춘하용 모 100% 또는 모혼방 직물 15종류를 사용하였으며 심지로는 신사복에 많이 쓰이는 3종류 심지를 사용하였다. KES시스템을 이용하여 직물의 접착후, 프레싱 처리 후, 드라이크리닝과 프레싱 처리 후의 물성 변화를 시험하였으며 다음과 같은 결과를 얻었다. 1) 접착 후 EM은 대체로 감소하지만 강성과 이력 현상은 증가하는 것으로 나타났다. 결과로 KOSHI, SHARI, HARI는 증가하고 THV는 감소하여 태는 접착으로 저하되었다. 2) 프레싱 처리 후는 접착 후와 큰 차이를 보이지 않는다. 마찰특성에서 좀더 매끄러워지고 마찰 계수는 증가하는 것으로 나타났다. 3) 드라이크리닝과 프레싱 처리 후의 물성의 변화에서는 위사 방향의 큰 값을 갖는 경우에 감소하는 것으로 나타났다. 굽힘 강성과 전단강성은 감소하였지만 이력은 증가하는 흥미로운 결과를 보인다. 드라이클리닝 용제의 효과로 여겨진다. 무게는 증가하여 직물이 처리 후 수축한 것으로 나타났다. 프레싱 처리 후와 비교시 KOSHI, SHARI, HARI와 FURAMl는 감소하고 THV는 증가하여 태가 향상하였다.

• Journal of the Korean Geotechnical Society
• /
• v.30 no.5
• /
• pp.17-24
• /
• 2014

This paper determines 1D shear wave velocity (Vs) distribution of rockfill zone of CFRD using Vs profile determined by the surface wave test. There exists uncertainty in the field test result because of a spatial variation of material property. The harmonic wavelet transform is used to evaluate the uncertainty of test result and generate random 1D Vs distributions which may exist in the rock fill zone. Through the statistical analysis of generated random Vs distributions, the representative 1D Vs distribution considering the uncertainty of test results is proposed for the rockfill zone of CFRD in Korea.