• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.1852-1856
• /
• 2010

본 연구에서는 청계천 물막이판 설치로 인한 유역의 내수침수 영향을 분석하고자 한다. 따라서 강우시 청계천 유역내 수문열림으로 인한 양안의 복개박스와 하천 본류간의 유출거동 모의가 필요하며, 이를 위해 청계천 수문을 SWMM 모형의 위어 조건으로 고려하여 박스와 연결된 관망의 유출량을 지점별로 모의 할 수 있도록 하였다. 실제 역류가 발생한 2009년 호우사상을 대상으로 물막이판 설치 전 후에 따른 청계천 본류와 양안 박스의 흐름 및 내수 침수의 영향을 분석한 결과 월류 발생 여부 및 지속시간의 경우 설치 전 후 동일하였으나 최대월류량 및 총 월류량은 설치 후 높게 산정된 것으로 나타났다. 이는 관거의 통수능 부족과 물막이판 설치로 인한 박스 내 수위 상승에 의한 것으로 판단된다. 향후 실제월류 발생 사상의 추가적인 모의를 통해 물막이판 설치 영향을 구체적으로 평가하고자 하며, 박스 내 수위 조절이 가능한 물막이판을 설치함으로써 최적 물막이판 운영방안을 도출하고자 한다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.240-244
• /
• 2011

2005년에 복원된 청계천은 6년의 시간이 지난 지금 우리나라를 대표하는 도심하천으로 문화 예술의 중심지로 각광을 받고 있다. 청계천 복원 당시 최근 수문자료를 이용한 안정적 설계가 이루어졌고, 양안관거 특성을 고려하여 내수침수의 영향을 감소시키고자 관거내 홍수량을 청계천 주하도에 배제하는 방식이 채택되었다. 하지만 관거에서 발생되는 초기 월류수로 인한 오염물질의 유입 및 돌발강우 시 청계천 내부의 어류 피해 등 수문 운영으로 인한 피해가 빈번하게 발생되었고, 이런 문제를 해결하고자 각 수문에 초기오염원 유입의 저감 방안으로 물막이판이 설치되었다. 현재 각 수문에 설치되어 있는 물막이판의 경우 규모의 적정성 및 최적위치에 대한 수리분석이 수행되지 않았고 그에따른 청계천 주수로 및 관거내부 흐름특성변화를 예측하기 어려운 것이 사실이다. 이에 본 연구에서는 현재 청계천에 설치되어 있는 물팍이판에 따른 관거 내부 홍수위 및 흐름장 변화 등 수리특성을 분석하여 물막이판 설치로 인해 발생될 수 있는 문제점을 파악하고 해결방안을 수립하고자 한다.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2018.10a
• /
• pp.92-92
• /
• 2018

• Proceedings of the KIEE Conference
• /
• 2003.10a
• /
• pp.57-59
• /
• 2003

PLS에 사용되는 반사판의 반사율과 300도의 열적 안정성을 높이기 위해 두 충의 투명 산화막이 Al기판위에 증착된 Al 필름 위에 증착되었다. 광학적 고려를 위해 낮은 굴절률은 가진 $SiO_2$와 치밀하고 높은 굴절률을 가진 $SiO_2-CeO_2$ 복합 산화물이 IAD 방법에 의해 증착되었다. 복합 산화물의 조성에 따른 굴절률 변화로부터 보다 치밀한 구조를 갖는 조성이 결정되었으며 이와 더불어 엔드홀 이온 소스에 의한 조사를 통해 Al 필름 보다 높은 반사율과 열적 안정성을 얻을 수 있었다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.7
• /
• pp.26-32
• /
• 2005

In this paper, the vibration response of the spacecraft solar array is investigated. The solar array model consists of composite thin walled beam and solar blanket, spreader bar. The composite thin walled beam incorporates a number of nonclassical effects of transverse shear, primary and secondary warping, rotary inertia and anisotropy of constituent materials. The solar blanket is a membrane subjected to uniform tension in the z direction. The spreader bar is a rigid member. A coupled thermal structure analysis that includes the effects of structural deformations on heating and temperature gradient is investigated. A stability criterion given in parameters for establishes the conditions for thermal flutter.

• Journal of Korean Society of Steel Construction
• /
• v.17 no.6 s.79
• /
• pp.673-679
• /
• 2005

According to continuous welded rails on a bridge, temperature changes bring about the expansion of the bridge deck,adding axial forces on the track. Moreover, the ballast on the bridge deck expansion joint is moved due to the bridge deck. The longer the bridge deck is, the greater the influence will be, loosening the ballast, causing track irregularities, and deteriorating passenger comfort. Considering the structure of the bridge itself and tolerance for track irregularities caused by the loosened ballast on the bridge, the maximum length of the deck should be less than 80 m, which is the same as the standard of French railways. In this study, the interaction between the expansion related to the bridge length and the irregularity in the longitudinal level, referring to measurements and maintenance work performed in high-speed railways, was analyzed. This research shows that the installation of a sliding plate or a vertical ballast stopper is not a good option, since it is difficult. On the other hand, the installation of a ZLR fastener or gluing is easy, but its influence is insignificant. In conclusion, switch tie tamping or manual tamping is more effective than other methods of what?

• Journal of the Korean Chemical Society
• /
• v.37 no.3
• /
• pp.302-308
• /
• 1993

Monolayers of calcium palmitate were deposited on a piezoelectric quartz crystal plate by the Langmuir-Blodgett(LB) technique, and it was found from frequency changes of the quartz crystal deposited LB films. The usual carbonyl absorbance at 1704 cm$^{-1}C$ was replaced by the split band in the 1540~1590 cm$^{-1}C$. The two absorptions at 1580 cm$^{-1}C$ and 1540 cm$^{-1}C$ were assigned to the antisymmetric stretching vibration of the calcium carboxylate group and the hydrated species due to the lowering carbonyl stretching frequency by hydrogen bonding$^1$ respectively. Besides, it was demonstrated by X-ray diffraction analysis. The swelling behaviour of LB films in water phase at 23$^{\circ}C$ was observed from the frequency change of the LB films deposited quartz crystal with time. Calcium palmitate LB films has been found to swell substantially in water without flaking, whereas hexadecanol LB films hardly swelled in water. Amount of swelling of calcium palmitate LB films was equivalent to 47 wt.${\%}$ of the dry LB films, which means that ca. 7 water molecules were incorporated per calcium palmitate amphiphile. Chemical structure of calcium palmitate LB film was estimated as [CH$_3$(CH$_2$)$_{14}$COO]$_2$Ca${\cdot}$XH$_2$O, and the hydration number was 1.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.2
• /
• pp.241-248
• /
• 2013

In this study, bearings were developed for a high-power propulsion motor operating in inclined operation conditions through a simulation and similitude-experimental methods using commercial rotating machinery dynamics analysis software. The developed journal bearing is electrically insulated and has low thermal conductivity because each part is connected with 2-4 -mm-thick epoxy plates. To realize an appropriate oil thickness, an oil lift system is adopted, and a half separated structure is applied to ensure the feasibility of maintaining very heavy components. This study discusses some of the key design aspects of sleeve bearing design for high-torque and low-speed propulsion motor applications. Furthermore, the conditions of variable slope tests are examined to prevent oil leakage from the bearing lip seal on the test rig.

• Journal of the Korean Electrochemical Society
• /
• v.5 no.2
• /
• pp.62-67
• /
• 2002

The corrosion of the metallic cell components is blown to be one of the major reason f3r the performance degradation and subsequently the life-time limitation of the MCFC. To elucidate the corrosion phenomena, a corrosion study with the AISI-type 316L stainless steel, the most widely used separator material, in 621Li/38K carbonate eutectic melt was carried out. Corrosion phenomena in an MCFC were observed to differ from one location to another due to different environmental condition. The stability of passive film was found to be responsible fur the variations in corrosion phenomena. According to the potentiodynamic analysis, the passive film formed in anode-gas environment was less stable than in cathode-gas environment. The potentiostatic method combined with XRD analysis in addition to the cyclicvoltammetry was conducted to get an insight on variety corrosion reaction of AISI-type 316L stainless steel in a carbonate melt.

• Applied Chemistry for Engineering
• /
• v.7 no.6
• /
• pp.1078-1086
• /
• 1996

The peroxo-polytungstic acid was formed by the direct reaction of tungsten powder with the hydrogen peroxide solution. Peroxo-polytungstic powder were prepared by rotary evaporator using the fabricated on to ITO coated glass as substrate by dip-coating method using $2g/10mL(W-IPA/H_2O)$ sol solution. A substrate was dipped into the sol solution and after a meniscus had settled, the substrate was withdrawn at a constant rate of the 3mm/sec. Thicker layer could be built up by repeated dipping/post-treatment 15 times cycles. The layers dried at the temperature of $65{\sim}70^{\circ}C$ during the withdrawn process, and then tungsten oxides thin film was formed by final heating treatment at the temperature of $230{\sim}240^{\circ}C$ for 30min. A linear rotation between the thickness of thin film and the number of dipping/post-treatment cycles for tungsten oxides thin films made by dip-coating was found. The thickness of thin film had $60{\AA}$ after one dipping. From the patterns of XRD, the structure of tungsten oxides thin film identified as amorphous one and from the photographs of SEM, the defects and the moderate cracks were observed on the tungsten oxides thin film, but the homogeneous surface of thin films were mostly appeared. The electrochemical characteristic of the $ITO/WO_3$ thin film electrode were confirmed by the cyclic voltammetry and the cathodic Tafel polaization method. The coloring bleaching processes were clearly repeated up to several hundreds cycles by multiple cyclic voltammetry, but the dissolved phenomenon of thin film revealed in $H_2SO_4$ solution was observed due to the decrease of the current densities. The diffusion coefficient was calculated from irreversible Randles-Sevick equation from the data obtained by the cyclic voltammetry with various scan rates.