• Journal of Bio-Environment Control
• /
• v.9 no.2
• /
• pp.73-78
• /
• 2000

This study was carried out to investigate appropriate processing conditions for expanded rice hulls to be used as a medium material in nutrient cultures. The water holding capacity of expanded rice hulls produced by using a domestic grinder with 8 mm gap and 3 mm cutter height was 271.0, and the bulk density and CEC were 0.19g·m-3 and 37.0 cmol·kg-1, respectively. These values are higher than those of perilte. However, geometric mean diameter (GMD) of expanded rice hulls was 1.01mm which was smaller than that of perlite, indicating unfavorable porosity. After supplying nutrient solution, the faster water percolation in expanded rice than perlite required more frequent water supply. There was no significant difference in tomato fruit yield between expanded rice hull and perlite. The pH increase and the lack of nitrogen in early stage of culture are to be solved in the future.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.414-414
• /
• 2019

농업으로부터의 비점오염은 지표수와 지하수 모두의 수질에 영향을 미친다. 특히, 비료, 퇴비, 농약 등의 인공적 질소가 살포된 토양은 강우시 화학 침출로 인한 수질오염이 발생되고 있다. 강우시 강우유출수와 함께 지표 수역으로 흘러들어오는 영양물질(질소, 인)은 저수지로 유입되어 침수시 작물이 죽게 되어 저수지의 부영양화 등의 수질 오염문제를 야기시킨다. 국내에서는 홍수조절용지에서의 영농활동의 전면 금지하고 있는 실정이지만, 불법적으로 경작활동이 진행되고 있다. 따라서, 본 연구에서는 다목적댐 홍수조절지 내 경작지 토양 및 양분 특성 평가를 수행하였다. 홍수조절지 내 경작지 토양 특성 및 양분 조사를 위하여 경작이 집중적으로 이루어지고 있는 대청호 지역을 모니터링 지점으로 선정하였다. 모니터링은 경작지 내 토양 시료 및 주변 토양을 채취하여 분석을 수행하였다. 채취한 토양은 토양표준분석법(농촌진흥청, 2012) 및 농업토양분석방법(국립산림과학원, 2014) 기준을 바탕으로 물리 화학적 분석을 수행하였다. 모니터링은 2018년 5월부터 수행되었으며 현재까지 월 1회씩 모니터링을 진행하고 있다. 연구 결과, 밭 경작지 토양은 논에 비해 실트질 함량이 절반으로 침투성이 높은 토양으로 분석되었으며, 영양염류의 침투를 통한 이동 가능(기저유출)이 높게 나타나는 것으로 조사되었다. 이는 중간유출 및 기저유출 저감방안 도입이 필요한 것으로 평가되었다. 작물별 토양 양분분석 결과 고추, 마늘, 담배 경작지에서 화학비료사용량이 타 작물에 비해 높은 것을 분석되었으며, 경작지에 화학비료 및 퇴비의 과다 사용으로 염류농도가 증가할 경우 전기전도도가 높아지며 토양의 삼투압을 증가시켜 물의 흡수와 각종 양분 흡수를 방해하는 것으로 평가되었다. 인의 존재 형태별 비교시 대부분의 경작지에서 높은 값을 보였으며, 특히 경작지 토양의 Residual-P의 농도가 원지반 보다 2~5배 정도 높게 나타났다. 이러한 원인은 퇴비의 사용으로 인한 Residual-P의 누적으로 평가되며, 환경변화에 따라 수층으로 인의 용출이 쉽게 발생하므로 향후 수질에 미치는 영향이 더 클 것으로 사료된다.

• Applied Chemistry for Engineering
• /
• v.32 no.1
• /
• pp.91-96
• /
• 2021

This study was conducted to improve the operating conditions of an adsorption tower filled with potassium impregnated activated carbon for high hydrogen sulfide capture capacity. Heat treatment modified the surface properties of activated carbon, and ultimately determined its adsorption capacity. The activated carbon doped with potassium showed 57 times more adsorption at room temperature than that of using the raw adsorbent. It is believed that uniform pore formation and strong bonding of the potassium on the surface of carbon contributed to the chemical and physical absorption of hydrogen sulfide. The SEM analysis on the surface structure of various commercial carbons showed that the modification of surface properties through the heat treatment generated the destruction of pore structures resulted in the decrease of the absorption performance. The pressure drop across the activated carbon bed was closely related with the grain size and shape. The optimum size of irregularly shaped activated carbon granules was 2~4 mesh indicating economical feasibility.

• Progress in Medical Physics
• /
• v.11 no.2
• /
• pp.91-99
• /
• 2000

This is a preliminary study for developing the method of the dose reconstruction in the patients, irradiated by mega-voltage photon beams from the linear accelerator, using the transit dose distributions. In this study we present the method of three-dimensional dose reconstruction and evaluate the method by computer simulation. To acquire the dose distributions in the patients (or phantoms) we first calculate the differences between the doses at the arbitrary points in the patients and the doses at the corresponding points where the transit doses are measured. Then, we can get the dose in the patients from the measured transit dose and the calculated value of the difference. The dose differences are calculated by applying the inverse square law and using the linear attenuation coefficient. The scatter to primary dose ratios, which are calculated by the Monte Carlo program using the CT data of the patient (or phantoms), are also used in the calculations. For the evaluation of this method we used various kinds of homogeneous and inhomogeneous phantoms and calculated the transit dose distributions with the Monte Carlo program. From the distributions we reconstructed the dose distributions in the phantom. We used mono-energy Photon beam of 1.5MeV and Monte Carlo program EGS4. The comparison between the dose distributions reconstructed using the method and the distributions calculated by the Monte Carlo program was done. They agreed within errors of -4%∼+2%. This method can be used to predict the dose distributions in the patient

• Progress in Medical Physics
• /
• v.18 no.3
• /
• pp.167-171
• /
• 2007

In the case of radiotherapy following breast conservation therapy for breast cancer patients, the characteristic of skin dose was investigated in the treatment of intensity modulated radiation therapy (IMRT) for breast cancer patients by comparing and analysing entrance skin dose irradiated during radiotherapy using tangential technique radiotherpy, and IMRT. The calculation dose irradiated to breast skin was compared with TLD measurement dose in treatment planning by performing the two methods of radiotherapy using tangential technique, and IMRT in treatment planning equipment. The skin absorbed dose was measured to pass a nipple by spacing of 1 cm distance from center to edge of body. In the radiotherapy of tangential technique, for the irradiation of 180 cGy to PTV, the calculation dose was ranged from 103.5 cGy to 155.2 cGy, measurement dose was ranged from 107.5 cGy to 156.2 cGy, and skin dose in the center was maximum 1.45 times more irradiated than that in the edge. In the IMRT, for the irradiation of 180 cGy to PTV, the calculation dose was ranged 9.8 cGy at 80.2 cGy, measurement dose was ranged 8.9 cGy at 77.2 cGy, and skin dose in the center was maximum 0.23 times less irradiated than that in the edge. IMRT was more effective for skin radiation risks because radiation dose irradiated to skin in IMRT was much less than that in radiotherapy of tangential field technique.

• The Korean Journal of Mycology
• /
• v.27 no.6 s.93
• /
• pp.424-429
• /
• 1999

This study was conducted to investigate the characteristics of polysaccharides isolated from the fruit body and cultured mycelia of Phellinus linteus IY001. All fractions were extracted by hot water, followed by ethanol precipitation (F-THE and M-HE) or ultrafiltration (M-HU) (F-TH, F-THE; fruit body, M-HE, M-HU; cultured mycelia). Among these fractions, F-TH fraction was obtained at the highest yields of 6.83% and yield of F-THE was at the level 2.79%. The carbohydrates of these fractions was found to be a heteroglucan composed of glucose, galactose, mannose, fructose, ribose and xylose by analysis of gas chromatography. The total carbohydrate contents of M-HE and M-HU fractions were 99.2%, and 86.0% respectively. The glucose content of M-HE, M-HU and F-THE ranged from 54 to 84.8% of the total monosaccharide. Amino acid pattern showed that all fractions contained a large amount of aspartic acid, glycine, glutamic acid, alanine. Serine and threonine were found to be involved in the linkage, O-linked type. These fractions, except F. TH, contained polysaccharides with the molecular weights of 12 kD and showed the characteristics of IR absorption for ${\beta}-glucosides$ at $890\;cm^{-1}$.

• Progress in Medical Physics
• /
• v.6 no.2
• /
• pp.51-60
• /
• 1995

Lithium Fluoride (LiF; TLD-100) crystal chips are normally used as thermolu minescence dosimeters (abbreviated as NC-100) for estimating the absorbed dose to the skin of a patient or in a solid water phantom undergoing radiotherapy with megavoltage photon (6 and 15MV) beams. In general, investigation has revealed a reduction in the sensitivity of NC-100 chips after many runs through heating cycles. A TLD-100 chip laminated with gold plate (140${\mu}{\textrm}{m}$) on the upper surface layer of its face toward the photon beam (abbreviated as GC-100) has properties different from that of a NC-100 chip activated by incident photons and contaminant electrons with various lower energies coming from the gantry head and air. Activation of the valence band electrons of GC-100 chips by incident photons, positrons and electrons-which come from the gold plate by mainly pair production process and partly from Compton scattering-results in more enhanced signal intensity, higher response per monitor unit, as well as a good linearity with monitor units and independence of dose rate. Since the electron beams (6 and 15 MeV) do not have the probability of pair production process with gold plate, there is only a small difference (about a 3.3％ increase for 15 MeV) in the signal gaps in the TL readout for electron beams between GC- and NC-100 chips. The 3.3％ increase is entirely due to the buildup caused by the 140 m gold plate. The sensitivity of GC-100 chips is much more susceptible to high energy photon beams than electron one because of pair production. The interaction of high energy photon with a material of high atomic number, such as the good plate in this case, results in a considerably significant probability of pair production. The gold plate on the NC-100 chips acts as not only an intensifier of their signals but also acts as a filter of contaminant electrons in therapeutic high energy X-ray beams.

• Journal of the Korean Vacuum Society
• /
• v.13 no.2
• /
• pp.86-91
• /
• 2004

Transiton-metal gallides attract wide interest as a candidate for high-temperature structural materials. In a wide composition range, in which it was known that Co-Ga alloy have CsCl (B2) crystallographic structure, a systematic study on the correlation between physical properties and electronic structures of Co-gallides was performed. $Co_{l-x}Ga$ $_{x}$ alloys ($0.35\leq$x$\leq0.55$) were prepared by arc-melting method and were annealed at $1000 ^{\circ}C$ for 48hour to increase the homogeneity. In this composition range all the prepared alloys have the CsCl (B2) structure. The chemical states and the electronic structure were studied by using x-ray photoemission spectroscopy (XPS), and x-ray absorption near-edge structure (XANES), and exhibit different physical properties depending on the composition. During the annealing, a significant oxidation has happened and all the oxygen atoms are incorporated with the Ga atoms to form a $Ga_2O_3$ phase. In a view point of electronic structure, the $Co_{l-x}Ga$ $_{x}$ alloys were formed by the Ga(p) - Co(d) hybridization.

• Food Science and Preservation
• /
• v.22 no.4
• /
• pp.591-597
• /
• 2015

In this study, extracts of chlorella using different extraction methods were compared for antioxidant activities and spray-dried chlorella powders were investigated for their physicochemical characteristics. The DPPH radical scavenging activity and superoxide radical scavenging activity of 50% ethanol extract were 29.19%, and 48.91%, respectively. The oxygen radical absorbance capacity (ORAC) of the 50% ethanol extract ($150.44{\mu}M/g$) was higher than those of other extracts. The total chlorophyll content of the 50% ethanol extract (542.89 mg/100 g) was higher than those of other extracts. The microencapsulation of the 50% ethanol extract was manufactured by spray-drying with 10 % maltodextrin (SD-C10), 20% maltodextrin (SD-C20), and 30% maltodextrin (SD-C30). The particle size of the freeze-dried powder ($454.47{\mu}m$) was higher than those of the spray-dried powders ($24.15{\sim}32.49{\mu}m$). Scanning electron microscope images showed that the spray-dried chlorella powders using SD-C10, SD-C20, and SD-C30 had an uniform particle distribution. The water absorption index and water solubility index (WSI) of powders were 0.31~0.45, and 96.96~98.28%, respectively. The spray-dried powders showed the stability in total chlorophyll content for 40 days storage. Based on these results, spray-dried chlorella powders could be used in various types of food processes.

• Progress in Medical Physics
• /
• v.9 no.4
• /
• pp.207-215
• /
• 1998

There have been many radiation measurement methods so far among which film dosimetry, TLD, and ion chamber are the most frequently used methods. But this study describes a new radiation measurement method which uses polymer gel and magnetic resonance imaging(MRI). The objective of this study is to fabricate a polymer gel sensitive to radiation and to generate a dose to MRI contrast relationship, and to apply this results to the radiation measurement for the brachytherapy. To do this, 12 cm diameter cylindrical gel phantom was made, and the phantom was irradiated using the 30 mm diameter circular collimator which was used for radiosurgery. And this irradiated phantom was scanned with MRI. To find out the relationship between the radiation dose and the transversal relaxation time, an image processing software(IDL) was used. From this study it is found out that the radiation dose showed linear relationship to the transversal relaxation time of the gel up to 17 Gy($R^2$=0.993) and they had a different relationship above 17 Gy. The dose distributions were calculated using these results for the Ir-192 sources, one for the HDR afterloading system and the other for a 2 mCi seed source. And these calculated dose distributions were compared to the ones from the treatment planning computers. From this study the dose to the irradiated gel's transversal relaxation time relationship was examined, and this result was tried for the measurement of the brachytherapy.