• Resources Recycling
• /
• v.17 no.3
• /
• pp.10-20
• /
• 2008

In order to study the behaviors of inorganic fillers in recycling of the waste agricultural plastic films, the washed PE fluffs from Shihwa and Jungeup Plant belonging to ENVICO were used respectively. First of all, the test pellets were manufactured by adding of inorganic fillers suchlike calcium carbonate and calpet by certain portions to PE fluffs and then the tested sheets were formed. The mechanical and thermal properties of the samples were measured and compared with others. The items measured were tensile, flexural, Izod impact, HDT, MFT, and so on. Morphologies were also investigated for various samples using the SEM. Finally, optimum ratios between recycled PE and inorganic additives were found out for the best products in physical condition as well as in economic point of view.

• The KIPS Transactions:PartC
• /
• v.16C no.1
• /
• pp.83-90
• /
• 2009

Wireless Sensor Network (WSN) is a wireless network that gathers information from remote area with autonomously configured routing path. We propose a fusion based routing for a 'convergecast' in which all sensors periodically forward collected data to a base station. Previous researches dealt with only full-fusion or no-fusion case. Our Fusion rate based Spanning Tree (FST) can provide effective routing topology in terms of total cost according to all ranges of fusion rate f ($0{\leq}f{\leq}1$). FST is optimum for convergecast in case of no-fusion (f = 0) and full-fusion (f = 1) and outperforms the Shortest Path spanning Tree (SPT) or Minimum Spanning Tree (MST) for any range of f (0 < f < 1). Simulation of 100-node WSN shows that the total length of FST is shorter than MST and SPT nearby 31% and 8% respectively in terms of topology lengths for all range of f. As a result, we confirmed that FST is a very useful WSN topology.

• Journal of IKEEE
• /
• v.21 no.4
• /
• pp.338-347
• /
• 2017

This paper describes the design and fabrication of a high power amplifier which is a component of TDL(Tactical Data Link) aircraft terminal. We applied high-speed frequency hopping technology, cognitive radio technology, and receive filter bank technology to efficiently use limited frequency resources with radar and other communication equipment using the same frequency band. The high-power amplifier is physically composed of a transmitter, a receiver, a mechanical part, and a cable assembly, and is designed to meet temperature characteristics and electrical characteristics such as maximum transmission distance and reception sensitivity. Modeling and simulator were used to satisfy the requirement of high power amplifier. The transmit power and the noise figure were measured at 50.02dBm and 2.682dB, respectively. It was confirmed that all the required specifications were satisfied in the electrical characteristics test and the environmental characteristic test.

• The Journal of Korean Association of Computer Education
• /
• v.18 no.2
• /
• pp.83-90
• /
• 2015

In an virtualization environment, several virtual machines use physical resources together. If a specific virtual machine uses to much of the computing resources, other machines may not be working properly. There are various method to solve this problem. Most representative study is to migrate a specified virtual machines to a different server, a target server. In this study, server load can be transferred to a target server by the remigrate of the load imposed on virtual machine. It is still problematic that virtual machine has to remigrate to a different server. This thesis has proposed the algorithm determining the remigration targets by applying dynamic thresholds to solve those problems. The migration algorithm applies dynamic thresholds according to the following criteria. Firstly, the usage of CPU, network and memory; secondly, decide the set of artificial machine and the target server based on the resources surpassed thresholds; thirdly, determine artificial machines based on the resource usage in the target server.

• Korean Journal of Crystallography
• /
• v.1 no.2
• /
• pp.66-75
• /
• 1990

The Pd-Te system has been investigated by differential thermal analysis, X-ray diffration, electron probe microanalysis and reflected light microscopy. New phase relations in 0-50at% Te portion of the binary system are proposed. Eight binary phases exist in the system:Pd17Te4, Pd20Te7.PdsTe3, P477e3, P497e4, P637e2, PeTe and PaTe2. Of these, P677e3 is a newly reported phase. P4177e4 is cubic, space group Fd3c, with a=12.678(5)A. The X-ray powder data of PdsTe3, indexed on an orthorhombic cell, give a= 12.843(3), b=15.126(3), c: 11.304(2)A and those of PdTTe.1, indexed on a monoclinic cell, give a=7.444(1), b= 13.918(2) , c=8.873(2)A. p =92.46(2). Some physical and optical properties of synthetic phases in the system are also reported.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.80.2-80.2
• /
• 2012

홀로 고립되어 존재하는 은하는 주변 은하와 상호작용을 하지 않은 채 진화하므로 은하의 진화를 연구하기에 아주 좋은 대상이다. 은하의 정량적 연구를 위해 꼭 알아야 하는 중요한 물리량으로 거리와 성간소광량이 있다. 우리는 허블 우주망원경(HST) Advanced Camera for Surveys(ACS)/High Resolution Channel(HRC)로 관측한 고립된 왜소불규칙은하 NGC 1156 ($RA_{2000}$=02:59:42.19, $DEC_{2000}$=+25:14:14.2) 중심부($26^{\prime\prime}{\times}29^{\prime\prime}$)의 archive 자료를 분석하여 이 은하의 거리와 성간소광량을 새로 구했다. 이 은하의 거리를 측정한 과거 자료는 Tully(1988, Nearby Galaxies Catalog) 목록과 Special Astrophysical Observatory 6m 망원경/VI(각 300s) 영상자료의 가장 밝은 별로 거리를 구한 Karachentsev et al. (1996) 자료 뿐이다. 우리는 HST/ACS/HRC+UBVI 자료 중 U자료를 이용하여 아주 신뢰할 만한 소광량 값($E(B-V)=0.35{\pm}0.05$)을 얻었고, 가장 밝은 빨간 별과 파란 별 자료를 이용하여 새로운 거리지수($(m-M)_0=29.39{\pm}0.20$, $d=7.6{\pm}0.7$ Mpc)를 결정했다. 이 거리 값은 과거의 값들(Tully $6.4{\pm}1.2$ Mpc; Karachentsev et al. $7.8{\pm}0.5$ Mpc)과 크게 다르지 않으며, 기존의 거리 자료들 역시 신뢰할만함을 보여준다. ACS/Wide Field Channel과 달리 ACS/HRC의 경우 등급 표준화 방정식이 완벽하지 않은데, 우리의 경우 F550M자료를 표준화할 수 없었다. 그러나 우리는 여러 파장, 많은 관측자료가 존재하는 47 Tucanae (NGC 104) 구상성단의 관측자료와 Padova 등연령곡선을 이용하여 성공적인 등급변환을 수행할 수 있었다.

• Journal of Korea Society of Industrial Information Systems
• /
• v.9 no.1
• /
• pp.56-62
• /
• 2004

This paper examined the change in reaction time and accuracy of mental work by physical activity. A treadmill-equipped instrument is used to attain several levels of physical activity. Subjects were recruited from college students and football players; and they were instructed to run on a treadmill at different speeds. In order to determine the individual levels of physical activity of subjects, in this paper, Borg's-RPE scales which indicates subjective levels of physical activity were obtained. And reaction time was evaluated before and after running by arithmetic calculation test Restricted within the limit of this experiment, the results of this study showed that arithmetic calculation performance as a scale of accuracy of mental work rather increase after the exercise even though there are slight difference among the subjects.

• Journal of the Korean Geosynthetics Society
• /
• v.16 no.2
• /
• pp.67-77
• /
• 2017

This study analyzes behavior of bearing capacity of open-ended pipe pile from laboratory experiment results. Unlike the conventional pipe piles, cone penetration is implemented into the inside of the pipe pile. During the cone penetration, cone driving energy helps densification of plugged soils and soils below the pile end. Sand pluviator was used to obtain homogeneous soil layers. Two kinds of piles with different pile outer surface roughness were prepared, and two different drop heights of pile driving were applied. Eight experimental cases varying pile outer surface roughness, pile driving energy for conventional and cone penetration implemented piles were conducted. From the experiments, ultimate load of the pile increased approximately by 70% for increased pile driving height, and it increased by 21% for rougher surface pile. When cone penetration is implemented, the ultimate load increased by 40% in average.

• The Journal of Korean Physical Therapy
• /
• v.16 no.1
• /
• pp.32-48
• /
• 2004

The purpose of this study was to evaluate the change of functional ambulation profile(FAP) and temporal-spatial gait parameters in hemiplegic patient by forceful respiratory exercise. 28 Hemiplegic patients due to stroke was randomized in 3 groups, forceful expiratory training(FET), forceful inspiratory training(FIT) and control group. In the experimental groups, ordinary physical therapy with forceful expiratory training and forceful inspiratory training for 20 minutes duration 3 times per week for 6 weeks were respectively performed. In the control group, only ordinary physical therapy was done. FAP and temporal-spatial gait parameters was measured at before and after experiments. The results of this experimental study were as follows : 1. In comparison of FAP before and after experiment, the FAP was significantly increased in the FET and FIT group (p<.01). In comparison of difference of FAP among 3 groups, there was the significant difference between the FIT group and the control group (p<.05). 2. The results of temporal-spatial gait parameters are as follows : 1) In comparison of gait velocity before and after experiment, the gait velocity was significantly increased in the FET and FIT group (p<.05). In comparison of difference of the gait velocity among 3 groups, there was the significantly difference between the FIT group and the control group (p<.05). 2) In comparison of gait cadence before and after experiment, the gait cadence was significantly increased in FIT group (p<.05). In comparison of the difference of the gait cadence among 3 groups, there was no significant difference between the FIT group and the control group (p>.05). Based on these results, it is concluded that the forced respiratory exercise program for 6 weeks can be improve the FAP and temporal-spatial gait parameters in hemiplegic patients. Therefore, the forced respiratory exercise is useful to improve the walking ability in hemiplegic patients.

• Journal of Korea Water Resources Association
• /
• v.35 no.3
• /
• pp.295-306
• /
• 2002

The modified TOPMODEL of two storage systems has been integrated to the generalized assumptions of decreasing hydraulic conductivity to vertical direction. Three different recharge functions were introduced to explore the impact of the macropore flow to vortical direction, the storage at the surface zone and the relative storage deficit of the soil matrix. Combinations of these approaches provide 30 type of the model structure for the hillslope hydrology. Developed models have been applied to several hydrologic events at the Sulmachun watershed. The performance evaluation with the Monte carlo simulation suggests that the exponential function of transmissivity reduction should be appropriate form for the physically -based hydrologic simulation on the Sulmachun watershed. It has been shown that the recharge function of macropore flow contributes to improve the predictability of the generalized version of modified TOPMODEL.