• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.10
• /
• pp.386-393
• /
• 2018

The Korean military supplies industry tends to become limited in terms of its development to specific areas in line with strategic promotion policies of the local private direct industrial site. However, the relation between base and small cluster is getting lower of the local industrial site. In this study, information related to authorized test reports for munitions was collected through the military quality information system and subjected to social network analysis(SNA). SNA was performed through the relationships among defense quality assurance agencies, test institutions, contracts and cooperative firms through UCINET's Two-Mode Network. In the field of weapon systems, the median technology industry, and the test analysis dependent are high in Seoul, so the analysis revealed that strengthening the infrastructure for test analysis is needed. Also, it was deemed necessary for government-driven political support. Besides, the field support system was efficiently utilizing a relatively local test analysis. It was analyzed that they are overcoming the regional boundaries of small clusters by strategically changing their contract and cooperative firms' status. The research found some spatial inconsistencies between base and small clusters in the military supplies industry, and it was judged that a political suggestion was needed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.7
• /
• pp.496-503
• /
• 2020

The regeneration of Incheon Inner Port is a recent, representative case of conflict related to urban policies. This study aimed to analyze the conflicts that have arisen during the urban regeneration process. This study was a qualitative study, and the conflict management strategy was derived by analyzing the conflict process, subject, and content. The results of the analysis are as follows. First, central governmental agencies have proposed a clear plan that is mainly focused on the port redevelopment project through the participation of private sector businesses. Second, Incheon is pursuing a new vision called "Creative City" with specific urban regeneration. Third, the Incheon Port Authority is required to maximize the efficiency of the regeneration projects. Fourth, organizations such as port logistics companies and port trade unions are demanding the use of port space. Fifth, local residents and civic groups insist that the entire Inner Harbor should be returned to the citizens. Therefore, the establishment of city planning and administrative guidelines is necessary to manage Incheon Inner Harbor and surrounding areas in a desirable manner in order to develop a regeneration philosophy for Incheon Inner Harbor. Furthermore, the establishment of cooperative governance is required for the participation of various stakeholders.

• Journal of Korean Society of Transportation
• /
• v.15 no.3
• /
• pp.75-92
• /
• 1997

추월가능성을 판단하기 위해서 앞을 바라볼 수 있어야 하는 거리를 추월시거라 한다. 적절한 추원시거의 확보는 2차선 도로의 효율성과 운전자의 안전성 제고 및 도로설계시 매우 중요하다. 이러한 목적을 위하여 추월시거를 산정할 수 있는 여러 모형이 개발되었으나, 실제 교통상황을 반영하기에 많은 문제점을 안고 있음이 지적되고 있다. 따라서 본 논문은 기존 모형들의 이론적 배경을 고찰하고, 각 모형의 단점과 한계를 파악하여, 운전자의 실제 추월형태를 고려한 새로운 추월시거산정모형을 개발하는데 주안점을 두고 있다. 본 논문에서 개발한 PASS모형은 현재 미국에서 도로설계시 기준으로 사용되고 있는 AASHTO모형을 보완하여 구축하였다. 기존의 모형들은 서로 다른 조건을 가정하여 개발되었기 때문에 각 모형들의 추월시거 산정값을 비교분석하는데 어려움이 있다. 하지만 PASS모형은 운전자의 반응시간, 차량의 길이, 차량의 가속능력 등 실제 추월시거 산정시 반드시 고려해야 할 중요한 요소들을 특성치로 반영할 수 있게 함으로써 다양한 추월 상황과 현실적인 교통상황을 폭넓게 수용할 수 있는 장점을 갖고 있다. 본 논문에서는 새로 개발한 P SS모형을 이용하여 얻은 결과와 기존의 AASHTO모형, MUTCD모형, Glennon모형을 통해 얻은 결과를 비교하였으며, PASS모형에 우리나라 현실에 적합한 특성치를 적용하여 2차로 도로의 추월시거를 산정하였다. 이 결과 현재 우리나라 도로용량편람에서 제시하고 있는 추월기능구간 기준인 450m가 설계속도가 낮은 일반국도에는 타당함을 확인할수 있었다. 그러나, 설계속도가 높은 화물타의 운행빈도가 높은 고속국도의 경우, 재검토가 필요할 것으로 판단된다.기존의 광유계 윤활제에 비하여 대단히 고가하는 문제점을 갖고 있다. 그러나 윤활 마찰면의 다양화와 가혹한 사용조건은 자성유체 윤활제의 연구개발 필요성을 크게 증대시키고 있다.xed Effects Model)을 결정하고, 각각에 해당하는 통계모형을 구축하였다. 이 결과 (1) 업종 및 기업규모별로 그룹간에 유의한 특성이 발견되었으며, (2) R&D 및 광고투자는 기업의 시장성과를 설명하는 중요한 변수이나, (3) R&D 투자의 경우는 광고에 비해 불확실성이 존재하는 것으로 나타났고, (4) 수리모형에서 도출된 한계원리가 통계모형에서도 유효한 것으로 드러났다.등을 토대로 한 10대 산업을 육성하기 위하여 과학기술부는 기술수요조사를 바탕으로 49개 주요기술을 도출하여, 과학기술 일류 국가 실현, 국민소득 2만불 달성이라는 국가적 슬로건을 내걸고 “차세대 성장동력” 창출을 위한 범정부차원의 기획과 연구비의 집중투자를 추진하고 있다.달성하기 위해서는 종합류류 전산망의 시급한 구축과 함께 화물차의 적재율을 높이고 공차율을 낮출 수 있는 운송체계의 수립이 필요한 것으로 판단된다. 그라나 이러한 화물전용차선의 효과는 단기적인 치유책일 수밖에 없기 때문에 물류유통 시설의 확충을 위한 사회간접자본의 구축을 서둘러 시행하여야 할 것이다.으로 처리한 Machine oil, Phenthoate EC 및 Trichlorfon WP는 비교적 약효가 낮았다.>$^{\circ}$E/$\leq$30$^{\circ}$NW 단열군이 연구지역 내에서 지하수 유동성이 가장 높은 단열군으로 추정된다. 이러한 사실은 3개 시추공을 대상으로 실시한 시추공 내 물리검층과

• Proceedings of the Korea Inteligent Information System Society Conference
• /
• 2002.05a
• /
• pp.315-322
• /
• 2002

최근에 경험적 지식을 체계화하는 방법으로 사례기반추론(CBR: Case Based Reasoning) 및 규칙기반추론(RBR: Rule Based Reasoning)이 여러 분야에서 이용되고 있다. CBR과 RBR이 각각 활용되기도 하지만 문제 해결의 정확성을 높이기 위해 복합된 형태로 사용되기도 하고, 흑은 효과적으로 문제를 해결하기 위해 문제 해결 단계별로 각각 사용되기도 한다 또한 데이터에서 지식을 추출하기 위한 세부 알고리즘으로는 인공지능과 통계적 분석기법 등이 활발하게 연구 및 적용되고 있다. 본 연구는 모니터의 핵심 부품인 섀도우마스크(Shadow Mask)를 개발하는데 있어 도면 협의부터 설계가지의 과정에 CBR과 RBR을 활용하고 발생되는 데이터를 이용하여 진화(Evolution)하는 지식기반시스템(Knowledge Based System)으로 구축하는 것을 목적으로 하고 있다. 특히 도면 협의시 인터넷상에 웹서버 시스템을 통하여 규격 (User Spec.)을 생성하고 이를 이용하여 자동으로 도면이 설계되도록 하고 저장된 사례들을 공유할 수 있도록 하여 도면 검토 시간이 단축되고 검토의 정확성을 기할 수 있어 실패비용을 감소시켰다. 그리고 실제 설계시 CBR과 RBR을 활용하여 자동설계를 할 수 있게 하였고 현장에서 발생되는 데이터를 지식화하여 유사사례 설계가 가능하도록 하였다. 지식기반시스템은 신속한 도면 검토가 가능하므로 인원 활용이 극대화되고, 섀도우 마스크 설계자와 마스터 패턴 설계자 사이의 원활한 의사소통을 통해 고객과의 신뢰성 확보와 신인도 향상을 기대할 수 있는 효과가 있다. 그리고 고급설계자에게만 의지되어온 것을 어느 정도 해결할 수 있고, 신입설계자에게는 훌륭한 교육시스템이 될 수 있다.한 도구임을 입증하였다는 점에서 큰 의의를 갖는다고 하겠다.운 선용품 판매 및 관련 정보 제공 등 해운 거래를 위한 종합적인 서비스가 제공되어야 한다. 이를 위해, 본문에서는 e-Marketplace의 효율적인 연계 방안에 대해 해운 관련 업종별로 제시하고 있다. 리스트 제공형, 중개형, 협력형, 보완형, 정보 연계형 등이 있는데, 이는 해운 분야에서 사이버 해운 거래가 가지는 문제점들을 보완하고 업종간 협업체제를 이루어 원활한 거래를 유도할 것이다. 그리하여 우리나라가 동북아 지역뿐만 아니라 세계적인 해운 국가 및 물류 ·정보 중심지로 성장할 수 있는 여건을 구축하는데 기여할 것이다. 나타내었다.약 1주일간의 포르말린 고정이 끝난 소장 및 대장을 부위별, 별 종양개수 및 분포를 자동영상분석기(Kontron Co. Ltd., Germany)로 분석하였다. 체의 변화, 장기무게, 사료소비량 및 마리당 종양의 개수에 대한 통계학적 유의성 검증을 위하여 Duncan's t-test로 통계처리 하였고, 종양 발생빈도에 대하여는 Likelihood ration Chi-square test로 유의성을 검증하였다. C57BL/6J-Apc$^{min/+}$계 수컷 이형접합체 형질전환 마우스에 AIN-76A 정제사료만을 투여한 대조군의 대장선종의 발생률은 84%(Group 3; 21/25례)로써 I3C 100ppm 및 300ppm을 투여한 경우에 있어서는 각군 모두 60%(Group 1; 12/20 례, Group 2; 15/25 례)로 감소하는 경향을 나타내었다. 대장선종의 마리당 발생개수에 있어서는 C57BL/6J-Apc$^{min/+}$계 수컷 이형접합체 형질전환 마우스에 AIN-76A 정제사료만을 투여한

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.19 no.6
• /
• pp.829-843
• /
• 2017

Subsea tunnel needs to be built over 50 km long to connect between nations and continents. However there are only 19 tunnels longer than 5 km until recently. And there is no history of constructing and operating tunnel longer than 50 km. In Korea, subsea tunnels with a length of more than 50 km are being planned, such as Korea~Japan, Korea~China, Honam~Jeju subsea tunnels. Because of the geographical conditions of Korea, most of these tunnels are inter-contry tunnels. So technology preemption for the subsea tunnel construction is getting more and more important. Most of these subsea tunnels are ultra-long tunnels under high water pressure conditions. So new technologies are required such as ventilation and disaster prevention of high-speed tunnels, securing of structural stability under high pressure conditions, and pressure reduction in high-speed conditions. These technologies are different from those of ground tunnels. Therefore, this paper describes the ultra-long subsea tunnel design under high water pressure of maximum 16 bars through the Honam (land) - Jeju (island) virtual subsea project. We proposed a reasonable solution to various problems such as securing structural stability in high pressure condition and ventilation disaster prevention system of ultra long-tunnel.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.31 no.1
• /
• pp.69-84
• /
• 2023

Despite the continuous installation and regular inspection of waste treatment facilities, complaints about excessive incineration and illegal dumping stench continue to occur at on-site treatment facilities. In addition, field surveys were conducted on the waste treatment facilities currently in operation (6 type) to understand the waste treatment process for each field, to grasp the main operating factors applied to the inspection. In addition, we calculated the material·energy balance for each main process and confirmed the proper operation of the waste disposal facility. As a result of the site survey, in the case of heat treatment facilities such as incineration, cement kilns, and incineration heat recovery facilities, the main factors are maintenance of the temperature of the incinerator required for incineration and treatment of the generated air pollutants, and in the case of landfill facilities Retaining wall stability, closed landfill leachate and emission control emerged as major factors. In the case of sterilization and crushing facilities, the most important factor is whether or not sterilization is possible (apobacterium inspection).In the case of food distribution waste treatment facilities, retention time and odor control during fermentation (digestion, decomposed) are major factors. Calculation results of material balance and energy resin for each waste treatment facility In the case of incineration facilities, it was confirmed that the amount of flooring materials generated is about 14 % and the amount of scattering materials is about 3 % of the amount of waste input, and that the facility is being operated properly. In addition, among foodwaste facilities, in the case of an anaerobic digestion facility, the amount of biogas generated relative to the amount of inflow is about 17 %, and the biogas conversion efficiency is about 81 %, in the case of composting facility, about 11 % composting of the inflow waste was produced, and it was comfirmend that all were properly operated. As a result, in order to improve the inspection method for waste treatment facilities, it is necessary not only to accumulate quantitative standards for detailed inspection methods, but also to collect operational data for one year at the time of regular inspections of each facility, Grasping the flow and judging whether or not the treatment facility is properly operated. It is then determined that the operation and management efficiency of the treatment facility will increase.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.23 no.3
• /
• pp.132-145
• /
• 2020

By coming of the 4th industrial revolution era, HD map have became a key infrastructure for determining precise location of autonomous driving in areas of futuristic cars, logistics and robots. Autonomous vehicles have became more dependent on HD map to determine the exact location of objects detected by various sensors such as LiDAR, GNSS, Radar, and stereo cameras as well as self-location decisions. By actualizing autonomous driving and C-ITS technologies, the demand for precise information on HD map have increased. And also the demand for the creation of new information based on the convergence of various changes and real-time information have increased. In this study, domestic and international HD map standards and related environments have analyzed. Based on this, usability has researched which comparison with standard HD map established by various institutions. Additionally, usability of standard HD map have studied for applying actual autonomous vehicles by reworking HD map. By the result of study, standard HD map have well established to use by various institutions. If further research about layer classification and definition by institutions will carried out based on this study, it has expected that and efficient establishment and renewal of HD map will take place.

• Journal of Korean Society of Transportation
• /
• v.19 no.3
• /
• pp.115-131
• /
• 2001

The Purpose of this study is to develop a simulation model for large-scale network with interrupted flow as well as uninterrupted flow. The Cell Transmission(CT) theory is used to simulate traffic flow. Flow transition rules have been newly developed to simulate traffic flows at merging and diverging sections, and signalized intersections. In the model, it is assumed that dynamic OD table is exogenously given. Simulation results for toy network shows that the model can explain queue dynamics not only in signalized intersections of urban arterials, but also in merging and diverging sections of freeway. In case study, the model successfully simulated traffic flows of 145,000 vehicles on CBD network of city of Seoul with 74 traffic zones, 133 signalized intersections among 395 nodes and 1110 links.

• Korean Chemical Engineering Research
• /
• v.58 no.2
• /
• pp.209-223
• /
• 2020

Executions of SCM in a chemical company of which divisions produce petrochemicals, compounds, batteries, IT material and medicine directly affect their own profit. Execution level of SCM or optimization is very important. This work presents activities of SCM and optimization of inefficient issues in several industrial divisions using mathematical optimization method. The meaning is not only academic research but also making a useful tool which active partner deals with in his work. It is explained how to do beforehand and afterward optimization problem. The benefits are mentioned in the sections. The first of examples would be cover supply plan optimization, optimal profit business plan, and scheduling of a stretching process of polarizer based on minimizing raw material loss in polarizer production. The second example would be cover the optimization of production/packaging plans to maximize productivity of Poly Olefin processes, and the third example is minimization of transition loss in the production of battery electrodes. The fourth example would be cover scheduling of vessel approaching to berth. Because transportation of large portion of raw material and products of petrochemical industry is dealt with vessel, scheduling of vessel approaching to berth is important at the shore of large difference of tide. The final example would be scheduling problem to minimization of change over time of ABS semi products.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.6
• /
• pp.185-195
• /
• 2017

In recent years, unexpected bridge fire accidents have increased because of augmenting the number of traffic volumes and hazardous materials by the increment in traffics and distribution business. Furthermore, in accordance with the effort of using the under space of bridges, the ratio of occupied by combustible materials like oil tanker or lorry has been increased. As a result, the occurrence of bridge fire has been growing drastically. In order to mitigate the accident of bridge fire, risk assessment of bridge fire has been studied, however, practical risk models considering safety from users' viewpoints were scarce. This study represented quantitative risk assessment model applicable to national road bridges in Korea. The primary factors with significant impacts on bridge fire accidents was chosen such as clearance height, materials of bridges, arrival time of fire truck and fire intensity. The selected factors were used for Fire Dynamics Simulation (FDS) and the peak temperature calculated by FDS in accordance with the fire duration and fire intensity. The risk assessment model in bridge fire reflected the FDS analysis results, the fire damage criteria, and the grade of fire truck arrival time was established. Response plans for bridge fire accidents according to the risk assessment output has been discussed. Lastly, distances between bridges and fire stations were calculated by GIS network analysis. Based on the suggested assessment model and methodology, sample bridges were selected and graded for the risk assessment.