• Title/Summary/Keyword: 문중(門中)

Search Result 160, Processing Time 0.025 seconds

신주액(腎主液)에 관한 연구(硏究)

  • Gwon, Dae-Sun;Yun, Chang-Ryeol
    • Journal of Korean Medical classics
    • /
    • v.18 no.3 s.30
    • /
    • pp.17-26
    • /
    • 2005
  • 음양오행설시한의학적기본원리(陰陽五行說是韓醫學的基本原理). 오행포괄목(五行包括木), 화(火), 토(土), 금(金), 수(水), 기상호간구유상생여상극적관계(其相互間具有相生與相克的關係), 인기유불급이보지(因其有不及而補之), 태과이억지적작용(太過而抑之的作用), 고상능유지평형(故常能維持平衡), 인체의차원리(人體依此原理), 역능불급이보지(亦能不及而補之), 태과이억지(太過而抑之). 재차문중주요연구(在此文中主要硏究), 화과성시유수래억제이조절평형적원리(火過盛時由水來抑制而調節平衡的原理). 오행중수배속어신(五行中水配屬於腎), 신주전신지수액(腎主全身之水液). 이신지수액(而腎之水液), 우분화위오종부동형태적오액(又分化爲五種不同形態的五液), 분별배속어오장(分別配屬於五臟). 인차(因此), 연구신수분화위부동형태지오액적과정화분별배속어오장적원리(硏究腎水分化爲不同形態之五液的過程和分別配屬於五臟的原理), 기능설명해제인체중과성적열이유지평형적도리(旣能說明解除人體中過盛的熱而維持平衡的道理).

  • PDF

Stress Stiffening Effect를 고려한 천마 연소관의 날개 부착부위 응력해석 기법연구

  • 이방업;강문중;문순일;은일상
    • Journal of the Korea Institute of Military Science and Technology
    • /
    • v.1 no.1
    • /
    • pp.189-200
    • /
    • 1998
  • 본 연구에서는 얇은 마레이징강으로 제작된 천마 연소관에 브라켓이 용접되어 비행 날개를 볼트로 체결한 경우, 압력과 공력하중에 의해 브라켓 부위에 집중되는 응력의 해석기법을 정립하기 위하여 선형해석과 기하학적 비선형 해석을 수행하였다. 높은 압력에 의해 발생한 얇은 연소관의 면내 응력이 구조물의 강성을 증가시키는 응력의 강성보강효과(stress stiffening effect)를 고려한 기하학적 비선형 해석을 수행하여 선형해석 결과와 비교하였으며, 압력과 공력하중을 동시에 적용할 수 있는 복합하중시험기로 변형률을 측정하여 해석치의 정확성을 검토하였다. 얇은 연소관에 압력과 공력하중이 동시에 작용하는 경우는 응력의 강성보강효과를 고려한 기하학적 비선형 해석을 수행함으로써 보다 정확한 응력을 구할 수 있다는 결론을 얻었다.

  • PDF

Investigation of the Water Gas Shift from Reforming Gas for CO Removal (일산화탄소 저감을 위한 개질가스의 전이반응 연구)

  • Kim, Seong-Cheon;Youn, Moon-Jung;Chun, Young-Nam
    • Transactions of the Korean Society of Mechanical Engineers B
    • /
    • v.31 no.10
    • /
    • pp.855-859
    • /
    • 2007
  • Hydrogen as an energy carrier in fuel cell offers perhaps the largest potential benefits of reduced emissions of pollutants and greenhouse gases. The generation of high-purity hydrogen from hydrocarbon fuels is essential for efficient operation of fuel cell. Reduction of carbon monoxide to an acceptable level of 10ppm involves high temperature and low temperature water gas shift (WGS), followed by selective oxidation of residual carbon monoxide. The WGS reactor was designed and tested in this study to produce hydrogen-rich gas with CO to less than 5000 ppm. In the water gas shift operation, gas emerges from the reformer is taken through a high temperature shift (HTS) catalyst to reduce the CO concentration to about $2{\sim}4%$ followed to about 5000 ppm via a low temperature shift (LTS) catalyst.

A Study on the Structure of Turbulent Diffusion Flame Behind the Hollowed Flame Holder(II) (중앙분공형 보염기 후류에 안정된 난류확산화염의 구조에 관한 연구(II))

  • Kang, I.G.;Lee, W.S.;Moon, J.K.;Lee, D.H.
    • Journal of Power System Engineering
    • /
    • v.3 no.3
    • /
    • pp.29-35
    • /
    • 1999
  • The purpose of study is to investigate the flame stability and structure of turbulent diffusion flame behind the hollowed flame holder, which is located on the waste gas coming out from the test furnace. PDFs and Power Spectra technique of fluctuating temperature and ion current measurement were needed for this purpose. We discussed that the three types of stabilized flames were found as the result of post study. In this paper, we established the stability mechanism near the flame holder.

  • PDF

Visualization of Vortex Tube near Submerged Nozzle in Simulator of Solid Rocket Motor (고체로켓 모사장치 내삽노즐 주위의 와류튜브 가시화)

  • Kim, Dohun;Shin, Bongki;Son, Min;Koo, Jaye;Kang, Moonjung;Chang, Hongbeen
    • Journal of the Korean Society of Visualization
    • /
    • v.11 no.2
    • /
    • pp.34-40
    • /
    • 2013
  • A flow visualization near submerged nozzle of solid rocket motor was conducted by experiments. A numerical simulation was also performed to reveal detailed phenomena. Radial cold flow simulating hot gas was introduced by a porous grain model which was manufactured by perforated steel plates. The grain model was mounted in high-pressure chamber which has quartz glass at the top of the grain model. From the high-speed images, a rotating vortex was observed and the two type of counter-rotating momentums were generated in numerical results. The rotating momentum was generated at the fin-slot grain because of unbalance between high-velocity flow from slots and low-velocity flow from fin-bases. As a result, roll torques can be produced by the rotating vortex tube.

An Exploratory Analysis for the Influence on IT Governance;Focusing on ITA/EA perspective (IT거버넌스의 영향요인에 관한 탐색적 분석;ITA/EA를 중심으로)

  • Ahn, Yeon-Shick;Kang, Jae-Hwa;Cho, Hyung-Rae;Kim, Moon-Jung
    • 한국IT서비스학회:학술대회논문집
    • /
    • 2007.05a
    • /
    • pp.417-422
    • /
    • 2007
  • 본 연구에서는 조직에서 ITA/EA가 기여하는 기능이 무엇인지 그에 관한 측정항목들을 도출하였다. 또한 조직의 IT거버넌스가 왜 구축되고, 구축효과는 무엇으로 평가할 수 있는지 측정항목을 탐색적으로 도출하였다. 그리고 설문조사를 바탕으로 상호간의 영향관계를 통계적으로 검증하였다. 분석 결과, IT거버넌스 영역중 IT자원 및 성과관리와 IT프로세스 관리에는 ITA/EA의 업무프로세스 지원과 투자효율화 요인이 유의한 영향을 미치는 것으로 나타났으며, 마찬가지로 IT서비스관리에는 업무프로세스 지원, 투자효율화, 인프라체계화 요인이 영향을 미치는 것으로 나타났다.

  • PDF

The Evaluation of Ageing Characteristics of Silicone Rubber for Outdoor by Leakage Current Monitoring (누설전류 모니터링에 의한 옥외용 실리콘 고무의 열화 특성 평가)

  • Kim, J.H.;Seo, K.S.;Moon, J.S.;Yang, G.J.;Cho, H.G.;Park, Y.G.
    • Proceedings of the KIEE Conference
    • /
    • 1999.07e
    • /
    • pp.2408-2410
    • /
    • 1999
  • The ageing process was checked by leakage current monitoring in Inclined-Plane Method. In order to monitor leakage current, DAS with 12-bit, 8-channel A/D converter was prepared. The monitored components of leakage current were averages of the rms and peak, max peak, cumulative charge, and the number of peaks in the ranges of 1-10, 10-20, 20-30, 30-40, 40-50, >50 mA. And, erosion depth was measured to be used as the index of the ageing. So, the results of leakage current components and erosion depth measurement were compared to find one or more components of which trends of changes were similar to that of erosion.

  • PDF

The Optimum Design of Green Water Protector for FPSO (FPSO - Green Water Protector 구조 최적 설계)

  • Bae, Myung-Hyun;Kim, Sung-Jun;Moon, Jung-Yang
    • Special Issue of the Society of Naval Architects of Korea
    • /
    • 2007.09a
    • /
    • pp.94-98
    • /
    • 2007
  • The latest development of the submarine oil field and the deep-sea explorer, FPSO is commonly proposed and used for offshore oil production. And because the fundamental requirement of FPSOs to remain moored at their position, they are unable to avoid severe weather and environment. FPSO normally operates head to the weather, and sensitive equipment located the exposed area will be influenced by green water damages, the damages may occur to both onboard equipment and topside structures with resulting risk to personnel. In this paper, the main focus considers the physical structures of green water protector in order to preserve topside structures, equipment and personnel from green water.

  • PDF

The Optimum Design of Hinged Cross Bar for Container Vessels (Hinged Cross Bar 구조 최적 설계)

  • Kim, Myong-Kyu;Lee, Dong-Uk;Moon, Jung-Yong
    • Special Issue of the Society of Naval Architects of Korea
    • /
    • 2008.09a
    • /
    • pp.29-32
    • /
    • 2008
  • Hinged cross bar which is fitted for buyer's special item in cell guide of container vessels has an advantage of efficiency on container loading. In this paper, the main focus is to confirm the structural adequacy of hinged cross bar supporting structure in cell guide under the considered loading condition for container vessel.

  • PDF