• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.4
• /
• pp.887-896
• /
• 2018

The purpose of this preliminary study was to investigate the effect of fall prevention program on the occurrence of falls in inpatients at general hospital. Before the intervention, we identified the occurrence of the rate of falls in I hospital at Incheon and 190 patients received rehabilitation treatment. The causes of falls were carelessness of caregivers and therapists, increased burden of therapists, and height of beds. After recognizing the problems, the authors developed a fall prevention program through the PDCA model. The fall prevention program consisted of a video of fall prevention education and education for the patients and caregivers, environmental improvement and education of therapists for two months. After intervention, 230 patients were subjected to be included as analysis of the incidence of falls included As a result, the fall incidence was reduced by 34.1~66.7% in the pain clinic and 21.3~40.8% in the exercise clinic / department of occupational therapy compared to the before intervention. These findings show that the fall prevention program has a positive effect on the fall of inpatients, and it can be used as a model for fall prevention.

• Journal of the Microelectronics and Packaging Society
• /
• v.9 no.4
• /
• pp.1-9
• /
• 2002

The metallurgical reaction properties between the pad consisted of 0.5 $\mu\textrm{m}$Au/5 $\mu\textrm{m}$Ni/Cu layers on a conventional ball grid array (BGA) substrate and In-15 (wt.%)Pb-5Ag solder ball were characterized during the reflow process and solid aging. During the reflow process of 1 to 5 minutes, it was observed that thin $AuIn_2$ or Ni-In intermetallic layer was formed at the interface of solder/pad. The dissolution rate of the Au layer into the molten solder was about $2\times 10^{-3}$ $\mu\textrm{m}$/sec which is remarkably low in comparison with a eutectic Sn-37Pb solder. After solid aging treatment for 500 hrs at $130^{\circ}C$, the thickness of $Ni_{28}In_{72}$ intermetallic layer was increased to about 3 $\mu\textrm{m}$ in all the conditions nevertheless the initial reflow time was different. These result show that In atoms in the solder alloy were diffused through the $AuIn_2$ phase to react with underlaying Ni layer during solid aging treatment. From the microstructural observation and shear tests, the reaction properties between In-15Pb-5Ag alloy and Au/Ni surface finish were analyzed not to trigger Au-embrittlement in the solder joints unlike Sn-37Pb composition.

• The KIPS Transactions:PartA
• /
• v.11A no.5
• /
• pp.355-364
• /
• 2004

These days, various clustering technologies have been adopted to construct web sites. High performance hardware switches have good performance, but have disadvantage of high cost for constructing small and middle-sized web sites. Now a days, many sites have been constructed with the LVS (Linux Virtual Server), which is free of charge and has good performance. Having a centralized load balancing with one front-end, the LVS causes a bottleneck when it receives all at once. In the paper, we suggest a way to remove the LVS bottleneck by providing multiple front-ends. In this architecture, all of cluster nodes act as both a front-end and a back-end. When the load of a node receiving requests is not large enough, the node responds to the client directly. When the load of a node is large enough, the node send the request to a node which is selected by a scheduling algorithm. The scheduling algorithm is discussed to balance loads between servers. While single front-end cluster raises the throughput curvedly, the multiple front-end cluster raises the throughput linearly.

• Journal of Sensor Science and Technology
• /
• v.2 no.1
• /
• pp.3-10
• /
• 1993

Polycrystalline CdS thin films were grown on ceramic substrate using a chemical bath deposition method. They were annealed at various temperature and X-ray diffraction patterns were measured by X-ray diffractometer in order to study CdS polycrystal structure. Using extrapolation method of X-ray diffraction patterns for the CdS samples annealed in $N_{2}$ gas at $550^{\circ}C$ it was found hexagonal structure whose lattice constants $a_{o}$ and $c_{o}$ were $4.1364{\AA}$ and $6.7129{\AA}$, respectively. Its grain size was about $0.35{\mu}m$. Hall effect on this sample was measured by Van der Pauw method and studied on carrier density and mobility defending on temperature. From Hall data, the mobility was likely to be decreased by piezo electric scattering at temperature range of 33K and 150k and by polar optical scattering at temperature range of 150K and 293K. We measured also spectral response, sensitivity (${\gamma}$), maximum allowable power dissipation and response time on these samples.

• Journal of Sensor Science and Technology
• /
• v.2 no.1
• /
• pp.81-86
• /
• 1993

Polycrystalline CdSe thin films were grown on ceramic substrate using a chemical bath deposition (CBD) method. They were annealed at various temperature and X-ray diffraction patterns were measured by X-ray diffractometer in order to study CdSe polycrystal structure. Using extrapolation method of X-ray diffraction patterns for the CdSe samples annealed in $N_{2}$ gas at $450^{\circ}C$ it was found hexagonal structure whose lattice parameters $a_{o}$ and $c_{o}$ were $4.302{\AA}$ and $7.014{\AA}$, respectively. Its grain size was about $0.3{\mu}m$. Hall effect on this sample was measured by Van der Pauw method and studied on carrier density and mobility depending on temperature. From Hall data, the mobility was likely to be decreased by piezo electric scattering at temperature range of 33 K and 200 K, and by polar optical scattering at temperature range of 200 K and 293 K. We measured also spectral response, sensitivity (${\gamma}$), maximum allowable power dissipation and response time on these samples.

• Journal of Korean Society of Environmental Engineers
• /
• v.33 no.11
• /
• pp.855-859
• /
• 2011

The main pollutants from zirconium alloy tubing manufacturing process in nuclear industry are nitrate ($NO_3-N$) and fluoride (F-)Nitric acid, and hydrofluoric acid is used for acid pickling. The process for the removal of nitrate and fluoride is composed of 1st chemical coagulation, SOD (Sulfur Oxidation Denitrification) process using sulfur-oxidizing denitrification, and 2nd chemical coagulation. The characteristic of the wastewater treatment is an application of SOD process. The SOD Process is highly received attention because it is significantly different from existing processes for sulfur denitrification. A JSC (JeonTech-Sulfur- Calcium) Pellet is unification of sulfur and alkalinity material. According to result of SOD process in wastewater treatment plant, the removal efficiency of T-N was over 91% and the average concentration of T-N from influent was 147.55 mg T-N/L and that from effluent was 12.72 mg T-N/L. Therefore, SOD process is a useful to remove nitrogen from inorganic industrial wastewater and a new development of microbial activator was shown to be stable for activation of autotrophic bacteria.

• Journal of Korea Technology Innovation Society
• /
• v.15 no.1
• /
• pp.185-202
• /
• 2012

This study analyzed the achievement characteristics of 21st Century Frontier R&D Program depending on the subject of study, type, period in order to provide necessary data required during planning and execution of the large scale R&D projects. 21st Century Frontier R&D Program is a representative national R&D project that has been supported for a decade. The research achievements were analyzed for researchers who participated in each four projects completed in 2010 and 2011 among 16 R&D projects of 21st Century Frontier R&D Program promoted by Ministry of Education, Science and Technology. The research is summarized as follows. First, the achievements varied depending on the main agent such as universities, R&D institutions, and industries. The achievement of universities includes significantly larger publications than those of R&D institutions and industries. Second, the rate of overseas patent application and registration were higher in industries significantly than those in other research agents. Third, the achievements differed depending on research type such as basic, applied, and development researches, and the development researches exhibited significantly higher achievements in domestic patent application and registration, overseas patent application, and technology transfer. Fourth, in terms of the research period, long-term projects show significantly larger number of domestic patent applications than those from short-term projects. Fifth, when achievements like the publication and overseas patent application were classified in such fields as bio, nano, and energy environment R&D, bio and nano fields showed higher achievement than the energy environment field. This research could empirically confirm that the achievement characteristics of large scale and long-term government support R&D projects vary for each research properties.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.59 no.6
• /
• pp.127-135
• /
• 2017

In this study, a cold well and a warm one with the distance of 100 m were installed in the alluvial aquifer. Groundwater used as the heat and the cold source of heat pump was designed to flow into the warm and the cold well with a diameter of 200 mm. In order to increase the heat and cold storage in aquifer, six auxiliary wells with the diameter of 50 mm and the depth of 30 m were installed at an interval of 5 m from the main well. Also, heat pump 50 RT, the thermal tank $40m^3$, and a remote control and monitoring system were installed in three single-span greenhouses ($2,100m^2$) for growing tomato in Buyeo, Chungcheongnam-do. According to the aquifer heat storage test which had been conducted from Aug. 31 to Sep. 22, 2016, warm water of $850m^3$ was found to flow into warm well. The temperature of the injected water was $30^{\circ}C$ (intake temperature : $15^{\circ}C$), and the heat of 12.8 Gcal was stored. The greenhouse heating test in winter had been conducted from Nov. 21, 2016 to Apr. 30, 2017. On Nov. 21, 2016 when heating greenhouse started, the aquifer temperature of the warm well was $18.5^{\circ}C$. The COP for heating with water source at $18.5^{\circ}C$ was 3.8. The intake water temperature of warm well was gradually lowered to the temperature of $15^{\circ}C$ on Jan. 2, 2017 and the heat pump COP was measured to be 3.2 at that time. As a result, the heat pump COP was improved by 18 %. and retrieval heat was 8 Gcal, the retrieval rate of heat stored in aquifer was estimated at 63 %.

• Strategy21
• /
• s.37
• /
• pp.242-274
• /
• 2015

2015년 5월 수중발사 탄도미사일(SLBM) 발사시험을 통해 북한은 전 세계의 이목을 또 다시 집중시켰다. 북한은 2013년 제3차 핵실험을 감행한 이후 최근까지도 탄도미사일과 로켓 발사 등의 무력도발을 지속해 왔다. 이와 같은 북한의 무력도발은 한반도의 안정뿐만 아니라 미국 본토의 안보에도 매우 부정적인 영향을 미치고 있다. 지금까지 미국은 북한의 핵미사일 개발 저지를 위해 경제적 또는 군사적 방안들을 선별적으로 적용해 왔다. 그러나, 이러한 미국의 노력에도 불구하고 북한은 여전히 핵미사일을 개발하겠다는 꿈을 포기하지 않고 있는 것이 사실이다. 본 논문은 북한의 핵미사일 개발에 대한 미국의 대안적 전략(Alternative Strategy)을 제시하는데 그 목적이 있다. 필자는 대안적 전략 제시에 앞서 북한의 핵과 탄도미사일 개발현황을 내용(Contents)과 맥락(Context) 차원에서 분석하고 미 오바마 행정부의 대북전략을 비판적으로 검토하였다. 그리고 대안적 전략으로 동맹국과 함께 경제적(Sticky Power), 군사적(Sharp Power) 수단의 동기화(Synchronizing)를 통해 북한이 감당하기 힘든 전략적 환경을 조성(Shaping the Strategic Environment)하는 것이 '북한의 핵개발 포기' 라는 전략목표를 달성하는 방안 임을 강조하고 있다. 미국이 대안적 전략목표를 달성하기 위해서는 경제적 수단으로 ① 북한의 자금세탁 및 위조지폐 발행국 지정, ② 북한을 지원하는 모든 해외자산에 대한 제재조치, ③ 북한의 테러지원국 재지정, ④ 북한 제재를 위한 미국의 입법추진, ⑤ 대량살상무기 관련 금수품목의 확대를 적용함과 동시에 군사적 수단으로 ① 대량살상무기 비확산 활동 강화, ② 대탄도미사일 전략 개발 및 정보(ISR: Intelligence Surveillance and Reconnaissance) 공유, 맞춤형 억제전략(TDS: Tailored Deterrence Strategy)의 구체화 등을 통한 한·미 군사 억제방안의 강화, 그리고 ③ SM-3, THAAD(Terminal High Altitude Area Defense) 등 한·미·일 3자간 MD(Missile Defense)체제의 구축 등을 동기화하여 적용해야만 할 것이다. 미국의 대안적 전략은 ① 북한의 핵미사일 개발에 대한 중국의 협력방지, ② 한·중간 경제관계의 악화, ③ 한·일간의 역사적 긴장관계라는 위험요소를 내포하고 있는 것 또한 사실이다. 따라서 미국이 대안적 전략목표인 '북한의 비핵화' 달성을 위해서는 이와 같은 위험요소를 완화시키는 노력도 병행되어야 할 것이다. 끝으로, 미국은 북한의 김정은이 핵미사일 개발 포기라는 상이한 방향의 전략적 결정을 할 경우에 대비하여 한·미 연합훈련의 보류, 북한에 대한 경제제재조치 해제 등 북한과의 협상 가능성도 열어두고 이에 대해서도 철저하게 준비해 나가야 할 것이다.

• KIPS Transactions on Software and Data Engineering
• /
• v.9 no.1
• /
• pp.25-32
• /
• 2020

In the context-aware system, rule-based AI technology has been used in the abstraction process for getting context information. However, the rules are complicated by the diversification of user requirements for the service and also data usage is increased. Therefore, there are some technical limitations to maintain rule-based models and to process unstructured data. To overcome these limitations, many studies have applied machine learning techniques to Context-aware systems. In order to utilize this machine learning-based model in the context-aware system, a management process of periodically injecting training data is required. In the previous study on the machine learning based context awareness system, a series of management processes such as the generation and provision of learning data for operating several machine learning models were considered, but the method was limited to the applied system. In this paper, we propose a training data generating method of a machine learning model to extend the machine learning based context-aware system. The proposed method define the training data generating model that can reflect the requirements of the machine learning models and generate the training data for each machine learning model. In the experiment, the training data generating model is defined based on the training data generating schema of the cardiac status analysis model for older in health status notification service, and the training data is generated by applying the model defined in the real environment of the software. In addition, it shows the process of comparing the accuracy by learning the training data generated in the machine learning model, and applied to verify the validity of the generated learning data.