• Journal of the Korean Applied Science and Technology
• /
• v.36 no.1
• /
• pp.324-332
• /
• 2019

Most countries including Korea and Indonesia have strong policy for implementing biofuels like biodiesel. Shortage of the oil feedstock is the main barrier for increasing the supply of biodiesel fuel. In this study, in order to improve the stability of feedstock supply and lower the biodiesel production cost, the feasibility of biodiesel production using two types of Indonesian tropical crop oils, pressed at different harvesting times, were investigated. R. Trisperma oils, a high productive non-edible feedstocks, were investigated to produce biodiesel by esterification and transesterification because of it's high impurity and free fatty acid contents. the kindly provided oils from Indonesia were required to perform the filtering and water removal process to increase the efficiency of the esterificaton and transesterification reactions. The esterification used heterogeneous acid catalyst, Amberlyst-15. Before the reaction, the acid value of two types oil were 41, 17 mg KOH/g respectively. After the pre-esterification reaction, the acid value of oils were 3.7, 1.8 mg KOH/g respectively, the conversions were about 90%. Free fatty acid content was reduced to below 2%. Afterwards, the transesterification was performed using KOH as the base catalyst for transesterification. The prepared biodiesel showed about 93% of FAME content, and the total glycerol content was 0.43%. It did not meet the quality specification(FAME 96.5% and Total glycerol 0.24%) since the tested oils were identified to have a uncommon fatty acid, generally not found in vegetable oils, ${\alpha}$-eleostearic acid with much contents of 10.7~33.4%. So, it is required to perform the further research on reaction optimization and product purification to meet the fuel quality standards. So if the biodiesel production technology using un-utilized non-edible feedstock oils is successfully developed, stable supply of the feedstock for biodiesel production may be possible in the future.

• Applied Chemistry for Engineering
• /
• v.32 no.3
• /
• pp.268-276
• /
• 2021

As wireless communication devices become more common, interests in how to control the electromagnetic waves generated from the devices are increasing. One of the most commonly used electromagnetic wave control materials is magnetic one, but due to the features that make the product heavy and thick when applied to the product, it is difficult to use them in curved electronic devices. Therefore, a polymer flexible meta electronic device has been presented to sort out the problem, which is thin and can have various curvatures. However, it requires an additional evaluation of curvature reliability. In this study, we developed a method to predict electromagnetic wave control characteristics through the resistance/length of the conductive ink line patterns of polymer flexible meta electronic devices, which is inversely proportional to the electromagnetic wave control characteristics. As the radius of curvature decreased, the resistance/length increased, and there was little variations with the duration times of curvature. We also found that both permanent and recoverable changes along with the removal of curvature were occurred when the curvature was applied, and that the cause of these changes was newly created vertical cracks in the conductive ink line pattern due to the tensile stress applied by applying curvature.

• Korean Journal of Heritage: History & Science
• /
• v.54 no.2
• /
• pp.120-135
• /
• 2021

Changdeokgung Rear Garden is an important place to show the essence of the garden culture of the Joseon Dynasty. In the garden landscape experience, the restoration of the road completes the system of connecting the main spaces. Therefore, the restoration of the road requires accurate understanding of its creation, extinction, and maintenance. The purpose of this study was to detail the changes in the path that occurred in the Changdeokgung Palace Rear Garden from the late Joseon Dynasty to the modern and contemporary period by analyzing literature and drawing materials. For a time-series analysis, "Donggwoldo" and "Donggwoldohyeong" produced in the Joseon Dynasty, along with "Changdeokgung Plan Drawing" produced in modern and contemporary times, and aerial photographs were used. Drawings and photographs of different coordinate systems were transformed into one coordinate system in the geographic information system ArcGIS to compare changes in the movements of different periods. The results of the study are as follows. First, a total of 37 sections have been used since Japanese colonial era, of which 13 have been maintained, 14 have disappeared, and 10 have been newly established. Among the extinction sections, the road north of Neungheojeong Pavilion is considered to be an urgent place to connect the space to the garden and restore it to enjoy the scenery. In the new section, it seems necessary to establish a new alternative road or shorten the section for the connecting section between Daebodan and Okryucheon. Second, it was revealed that the biggest and most frequent changes to the road system in the garden were Japanese colonial era and renovations in the 1970s. It is worth noting the changes in the road since the 1970s, rather than Japanese colonial era, where it was difficult to manage the gardens independently. The access road to Okryucheon remained in its original shape until the 1990s, but it was renovated to its current shape due to misperception of the original shape. A project is needed to find out the cause of the change in this period and restore the damaged original shape. The biggest achievement of this study is that it revealed the changes in the garden path of Changdeokgung Palace in modern and contemporary times. The biggest achievement of this study is that it revealed the changes in the road of Changdeokgung Palace Rear Gardens in modern and contemporary times. However, there is a limitation that it has not been able to clearly present the location and shape that should be restored because it has not found data on landscaping plans or maintenance. In order to restore the road using the data revealed in this study, it seems necessary to consider realistic problems such as current space utilization, viewing system, disaster prevention and maintenance.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.26 no.3
• /
• pp.263-276
• /
• 2021

Marine benthic organisms have been used as the indicators for the environment assessment and recently considered as a very important component in the biodiversity and ecosystem restoration. In Korean waters, the quantitative data on marine benthos was used as one of major components for the marine pollution assessment for 50 years since 1970s. The species identification which is an important factor for the quantitative biological data was mainly performed by the marine benthic ecologists. This leads to the deterioration of the data quality on marine benthos from the misidentication of major taxonomic groups due to the lack of taxonomic expertise in Korea. This taxonomic problem has not been solved until now and remains in most data from national research projects on the marine ecosystems in Korean waters. Here we introduce the quality assurance and control (QA/QC) system for the marine biological data in UK, that is, NMBAQC (Northeast Atlantic Marine Biological Analytic and Quality Control) Scheme which has been performed by private companies to solve similar species identification problems in UK. This scheme asks for all marine laboratories which want to participate to any national monitoring programs in UK to keep their identification potency at high level by the internal quality assurance systems and provides a series of taxonomic workshops and literature to increase their capability. They also performs the external quality control for the marine laboratories by performing the Ring Test using standard specimens on various faunal groups. In the case of Korea, there are few taxonomic expertise in two existing national institutions and so they can't solve the taxonomic problems in marine benthic fauna data. We would like to provide a few necessary suggestions to solve the taxonomic problems in Korean marine biological data in short-terms and long-terms: (1) the identification of all dominant species in marine biological data should be confirmed by taxonomic expertise, (2) all the national research programs should include taxonomic experts, and (3) establishing a private company, like the Korea marine organism identification association (KMOIA), which can perform the QA/QC system on the marine organisms and support all Korean marine laboratories by providing taxonomic literature and species identification workshops to enhance their potency. The last suggestion needs more efforts and time for the establishment of that taxonomic company by gathering the detailed contents and related opinions from diverse stakeholders in Korea.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.25 no.2
• /
• pp.29-34
• /
• 2021

Purpose Sample reception environment system in nuclear medicine has not changed much compared to 20 years ago. When preparing sample for in vitro test, there was no significant change because the test was carried out by generating an own specimen from the parent specimen. In this study, We would like to introduce a method that automatically removes the sample cap using the automated decapper equipment and enables automatic reception at the same time. In addition, including a provisional reception system. Materials and Methods In 2019, it was intended to get a device that automatically removes the cap of a patient's blood sample. This equipment is the same as the equipment used in the Department of Laboratory Medicine (Vacuette Ⓡ Unicap Belt Decapper, Greiner bio-one, Austria). However, the purchase was delayed due to differences in tube size, budget, and space. In January 2020, we borrowed domestic automatic decapper equipment and modified it to suit our laboratory environment. After 9 months, we were able to introduce a system that automatically removes the lid of a patient's blood sample and at the same time automatically accepts the test. And, through the provisional reception system, it was possible to know the arrival of the specimen in a short time. Results With the use of an automatic decapper device, the sample cap was automatically removed, and the reception proceeded at the same time. So, it was very efficient at work because it shortened the sample preparation time by about 20 minutes. In addition, it was possible to prevent the examiner's musculoskeletal disorders caused by repeated wrist use. After using the provisional reception system, patients were able to be discharged quickly, and the number of phone calls to confirm the arrival of samples was reduced. Conclusion Most hospitals have about four employees in the nuclear medicine in vitro laboratory. It is effective to use automatic decapper equipment and a provisional reception system for organizations that perform work with the minimum number of personnel.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.22 no.1
• /
• pp.113-129
• /
• 2020

In this study we examined the topic analysis and correlation analysis by text mining to extract meaningful information or rules from the self introduction letter of freshman at Korea National College of Agriculture and Fisheries in 2020. The analysis items are described in items related to 'academic' and 'in-school activities' during high school. In the text mining results, the keywords of 'academic' items were 'study', 'thought', 'effort', 'problem', 'friend', and the key words of 'in-school activities' were 'activity', 'thought', 'friend', 'club', 'school' in order. As a result of the correlation analysis, the key words of 'thinking', 'studying', 'effort', and 'time' played a central role in the 'academic' item. And the key words of 'in-school activities' were 'thought', 'activity', 'school', 'time', and 'friend'. The results of frequency analysis and association analysis were visualized with word cloud and correlation graphs to make it easier to understand all the results. In the next study, TF-IDF(Term Frequency-Inverse Document Frequency) analysis using 'frequency of keywords' and 'reverse of document frequency' will be performed as a method of extracting key words from a large amount of documents.

• Journal of Life Science
• /
• v.32 no.12
• /
• pp.979-988
• /
• 2022

Halophytes have been reported to possess a variety of physiological activities, such as anti-cancer, anti-oxidant, anti-diabetes, anti-inflammatory, and anti-obesity. Studies on the roots of the halophyte Rosa rugosa, in particular, have shown a variety of physiological activities and are known to be effective for nursing diabetic complications in traditional Korean medicine. In this study, the effect of R. rugosa on adipogenesis was investigated in 3T3-L1 pre-adipocytes treated with crude extract and solvent fractions (H₂O, n-BuOH, 85% aq. MeOH, and n-Hex) obtained from R. rugosa roots. Treatment with extract and the solvent fractions inhibited the formation of intracellular lipid droplets in differentiated 3T3-L1 adipocytes compared to the untreated group. In particular, n-BuOH and 85% aq. MeOH fractions effectively decreased the expression of adipogenic transcription factors: peroxisome proliferator activated receptor-γ (PPARγ), CCAAT/enhancer-binding protein α (C/EBPα), and sterol regulatory element-binding protein 1c (SREBP1c) in both mRNA and protein levels. In conclusion, these results suggest that R. rugosa contains anti-adipogenic molecules that can be utilized as a nutraceutical against obesity. Further refining of n-BuOH and 85% aq. MeOH fractions and analysis of their action mechanisms could yield potential therapeutic agents with anti-adipogenic effects.

• Journal of Korean Society of Forest Science
• /
• v.112 no.2
• /
• pp.157-172
• /
• 2023

Controlled pollination (CP) is an important method in tree breeding programs because CP quickly generates desirable genotypes and rapidly maximizes genetic gains. However, few studies have evaluated the efficiency and success rate of CP in the breeding program of Pinus densiflora. To evaluate CP and the management of control pollinated progenies, we used 159 individuals in CB2 × KW40 or KW40 × CB2 populations that were established in 2015. After genotyping microsatellite loci, we estimated whether the number of primers was sufficient or not. Then, we performed pedigree analysis. The result showed that the number of primers was sufficient. By pedigree analysis, we found out that 60 of 159 individuals had been generated by the mating between CB2 and KW40. In the maternity analysis, there was evidence to indicate the possibility of management problems. Therefore, we excluded 54 individuals and repeated the pedigree analysis. In the second analysis, 47 of 105 individuals were generated by the mating between CB2 and KW40. To increase the efficiency of CP in tree breeding programs, several precautions are required. It is necessary to identify the exact clone names of the mother and father trees. In addition, CP processes should be performed properly, including deciding on the schedule of CP and the isolation of female strobili or flowers. Finally, the monitoring of hybrid progenies management after mating is important. Molecular markers should be used to identify the clone names of the mother and father trees and for monitoring post hoc management. This study provides a reference for tree breeding programs for the future control pollination of pine species.

• Journal of Intelligence and Information Systems
• /
• v.28 no.1
• /
• pp.263-286
• /
• 2022

This study acquires NBA statistical information for a total of 32 years from 1990 to 2022 using web crawling, observes variables of interest through exploratory data analysis, and generates related derived variables. Unused variables were removed through a purification process on the input data, and correlation analysis, t-test, and ANOVA were performed on the remaining variables. For the variable of interest, the difference in the mean between the groups that advanced to the playoffs and did not advance to the playoffs was tested, and then to compensate for this, the average difference between the three groups (higher/middle/lower) based on ranking was reconfirmed. Of the input data, only this year's season data was used as a test set, and 5-fold cross-validation was performed by dividing the training set and the validation set for model training. The overfitting problem was solved by comparing the cross-validation result and the final analysis result using the test set to confirm that there was no difference in the performance matrix. Because the quality level of the raw data is high and the statistical assumptions are satisfied, most of the models showed good results despite the small data set. This study not only predicts NBA game results or classifies whether or not to advance to the playoffs using machine learning, but also examines whether the variables of interest are included in the major variables with high importance by understanding the importance of input attribute. Through the visualization of SHAP value, it was possible to overcome the limitation that could not be interpreted only with the result of feature importance, and to compensate for the lack of consistency in the importance calculation in the process of entering/removing variables. It was found that a number of variables related to three points and errors classified as subjects of interest in this study were included in the major variables affecting advancing to the playoffs in the NBA. Although this study is similar in that it includes topics such as match results, playoffs, and championship predictions, which have been dealt with in the existing sports data analysis field, and comparatively analyzed several machine learning models for analysis, there is a difference in that the interest features are set in advance and statistically verified, so that it is compared with the machine learning analysis result. Also, it was differentiated from existing studies by presenting explanatory visualization results using SHAP, one of the XAI models.

• Korean Chemical Engineering Research
• /
• v.62 no.1
• /
• pp.36-43
• /
• 2024

Fishing net waste (FNW) constitutes over half of all marine plastic waste and is a major contributor to the degradation of marine ecosystems. While current treatment options for FNW include incineration, landfilling, and mechanical recycling, these methods often result in low-value products and pollutant emissions. Importantly, FNWs, comprised of plastic polymers, can be converted into valuable resources like syngas and pyrolysis oil through pyrolysis. Thus, this study presents a process for generating high-purity hydrogen (H₂) by catalytically pyrolyzing FNW in a CO₂ environment. The proposed process comprises of three stages: First, the pretreated FNW undergoes Ni/SiO₂ catalytic pyrolysis under CO₂ conditions to produce syngas and pyrolysis oil. Second, the produced pyrolysis oil is incinerated and repurposed as an energy source for the pyrolysis reaction. Lastly, the syngas is transformed into high-purity H₂ via the Water-Gas-Shift (WGS) reaction and Pressure Swing Adsorption (PSA). This study compares the results of the proposed process with those of traditional pyrolysis conducted under N₂ conditions. Simulation results show that pyrolyzing 500 kg/h of FNW produced 2.933 kmol/h of high-purity H₂ under N₂ conditions and 3.605 kmol/h of high-purity H₂ under CO₂ conditions. Furthermore, pyrolysis under CO₂ conditions improved CO production, increasing H₂ output. Additionally, the CO₂ emissions were reduced by 89.8% compared to N₂ conditions due to the capture and utilization of CO₂ released during the process. Therefore, the proposed process under CO₂ conditions can efficiently recycle FNW and generate eco-friendly hydrogen product.