• Journal of the Society of Naval Architects of Korea
• /
• v.33 no.4
• /
• pp.22-31
• /
• 1996

An efficient calculation method of pressure acting on a bluff body is developed. The method is applied to assess the containment capability of an oil fence, considering skirt deformation in current. The pressure on the frontal side of the oil fence is determined by analyzing the potential flow, substituting the wake region as a rigid body which has its boundary at the closed separation streamlines. The pressure at the downstream side of the fence, the so called base pressure, is obtained from the existing experimental results. To verify the calculation method, pressure drag of some bluff bodies in an infinite-fluid medium is calculated, which shows good agreement with the experimental results. The deformed shape of the oil fence is obtained by solving, iteratively, the coupled equations governing the flow field and the deformation of the oil fence, respectively. The deformed shape and the decrease of draft of oil fences with different ballast mass in various current conditions are investigated.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.394-394
• /
• 2011

급속한 산업의 발달은 심각한 환경오염 및 에너지 문제를 가져왔다. 이를 해결하기 위하여 무한한 에너지원인 태양에너지를 원천으로 하는 친환경 정화소재로서의 광촉매(photocatalyst)를 통하여 인류의 에너지를 확보하는 것에 대한 관심이 급격하게 증가하고 있는 추세이다. 현재 광촉매로 가장 많이 사용되는 $TiO_2$의 경우 뛰어난 광활성과 저렴한 가격, 광 안정성, 화학적 안정성을 가짐에도 불구하고, 3.2 eV라는 상대적으로 넓은 band gap을 가지기 때문에 약 386 nm보다 짧은 파장을 갖는 자외선만 흡수할 수 있다. 이로 인한 가시광 응답성의 부재를 해결하기 위해 수십년간 많은 연구가 진행되어 왔다. 따라서 본 연구에서는 ICP assisted pulsed DC reactive magnetron sputtering을 이용하여 $TiO_2$를 기반으로 하면서 가시광영역의 빛을 흡수하여 높은 효율을 얻을 수 있도록 Nitrogen doping, Low band gap semi-conductor sensitization 등의 방법을 사용하여 광촉매를 제작하였다. 시료의 chemical state와 crystallinity를 확인하기 위하여 X-ray photoelectron spectroscopy와 X-ray diffraction method를 이용하여 분석을 수행하였으며, 이러한 공정을 통해 제작된 $TiO_2$기반 광촉매의 가시광 응답성을 확인하기 위하여 UV/Vis 스펙트럼을 측정하였다. 또한 물 분해 장치(water splitting device)를 제작하여 수소와 산소 생성시 흐르는 전류를 측정하여 광특성을 평가하였다.

• Nuclear Engineering and Technology
• /
• v.7 no.4
• /
• pp.267-275
• /
• 1975

The low-lying resolved resonance structure of U-233 is investigated in terms of the Adler-Adler multilevel formalism. The resonance capture and fission cross sections of U-233 below 60 eV are calculated using Adlers' effective resonance parameters. The infinite dilution resonance integrals of U-233 are computed with the use of the Alders' parameters adjusted to fit the cross section data. It is found that the agreement of calculations with experiments is generally good over most of the energy region covered. A transformation of the Adlers' multilevel parameters into an equivalent set of the single level pseudoparameters is made for the use of the existing computer codes which are useful in the reactor calculations but do not have capability to use the multilevel parameters. The results of this transformation are presented in the form of a table.

• Journal of Korean Ophthalmic Optics Society
• /
• v.5 no.2
• /
• pp.119-125
• /
• 2000

We analyzed to calculate optical capacity after we chose established 2 component zoom copier lens system in this research. As the lens system is zoom lens system of finite object point, it has moving area limited not like to use generally camera zoom lens of infinite object point because it moves between object and image plane. The magnification of optical system can obtain -1.41~-0.64 i.e., extended or shortened image as transverse magnification, and it acquires f/12 and about $20^{\circ}$ field of view. Although this 2 component zoom copier lens system will be down resolution and dark compared with f/2.8 acquired at camera lens, it will be possibile to be able to make large aperture and it can acquire more better correct aberration with the addition of auxiliary group forward or backward.

• Journal of Convergence for Information Technology
• /
• v.10 no.11
• /
• pp.265-271
• /
• 2020

This study aims to help the creative idea of nail art design and the expansion of artistic realm by presenting nail art applied with dot, line, and plane, which are the basic elements of the sculpture that make up the space for visual expression of nail art. The research method considered the concepts and characteristics of the molding elements through professional books, prior research, and Internet website. Along with various expression techniques, the characteristics of dot, line, and plane were applied to nail art and expressed as visual messages, and a total of six works were produced according to each characteristic. This research aims to find a new perspective on nail art expression by reinterpreting the characteristics of dot, line, and plane, which are formative elements, in an artistic approach, and to contribute to enhancing the infinite possibilities of nail art design by utilizing them.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.11
• /
• pp.1667-1674
• /
• 2010

The fatigue life is estimated while determining the reliability of aircraft structures. In this study, the estimation of fatigue life was carried out on the basis of a cumulative damage theory; the working S-N curve and the equivalent stress on the engine support structure significantly affect the safety of the aircraft. The maximum stress observed was 1,080 MPa in the case of scissors link under crash load condition, and there was a 5% margin for the allowable stress corresponding to the temperature reduction factor. The maximum stress was 876 MPa, and the stress equation coefficient had a maximum value of 0.019 MPa/N in the case of scissors link under fatigue loads. In the results of the fatigue life analysis, the safety life in a fretting area of scissors link upper part was 416,667 flight hour, and other parts showed to infinite life. Therefore, it was demonstrated that the fatigue life requirement of aircraft engine support structure (scissors link, straight link) could be satisfied.

• Journal of the Society of Naval Architects of Korea
• /
• v.29 no.3
• /
• pp.21-32
• /
• 1992

Numerical solutions are presented for solving the free surface flow created by a three-dimensional body moving beneath the free surface with constant velocity at an angle of attack. The solution is obtained using a panel method based on the perturbation potential, which employs Havelock sources and normal dipoles distributed on the body surface and Havelock normal dipoles in the wake downstream of the trailing edge. A pressure Kutta condition with an iterative solution procedure is implemented to satisfy equal pressure condition on the upper and lower surfaces at the trailing edge. Numerical calculation examples in the present paper include an ellipsoid at zero angle of attack, a rectangular planform wing at a small angle of attack in the limit of zero Froude number and then free surface flows and hydrodynamic forces acting on the submerged spheroid and parabolic strut are calculated. Discussions are made about the validity of the present method.

• Journal of the Korea Convergence Society
• /
• v.10 no.4
• /
• pp.209-217
• /
• 2019

This study examined the concept and characteristics of grotesque painting and its history and presented body painting convergence designs using paintings of each age as basic data on creative and unique body painting design. For the purpose, this study theoretically examined the concepts, characteristics and expressing techniques of grotesque and body painting, analysed images of grotesque paintings in each age and represented convergence body painting based on the results. As a result, it was discovered that paintings including grotesque paintings provided infinite imagination and diverse themes for body painting artists. It means that artistic works can work efficiently for future body painting design. Also, it is expected that they will inspire those who want to study them more academically and in an organized way and body painting will have an independent area in art.

• The Journal of the Convergence on Culture Technology
• /
• v.5 no.2
• /
• pp.361-366
• /
• 2019

The amount of data created in the present intelligence information society is beyond imagination. Big data has a great diversity from every information via SNS and internet to the one created by government and enterprises. This various data is close at hand having infinite value as same as crude oil. Big data analysis and utilization by data mining over every areas in the modern industrial society is getting more important for finding useful correlation and strengthening forecasting power against the future uncertainty. Efficient management and utilization of big data produced by complex modern society will be researched in this paper. Also it addresses strategies and methods for securing overall industrial competitiveness, synergy creation among industries, cost reduction and effective application based on big data in the $4^{th}$ industrial revolution era.

• Geophysics and Geophysical Exploration
• /
• v.15 no.2
• /
• pp.75-84
• /
• 2012

The sea layer in marine Controlled-Source Electromagnetic (mCSEM) survey changes the conventional definition of apparent resistivity which is used in the land CSEM survey. Thus, the development of a new algorithm, which computes apparent resistivity for mCSEM survey, can be an initiative of mCSEM data interpretation. First, we compared and analyzed electromagnetic responses of the 1D stratified gas hydrate model and the half-space model below the sea layer. Amplitude and phase components showed proper results for computing apparent resistivity than real and imaginary components. Next, the amplitude component is more sensitive to the subsurface resistivity than the phase component in far offset range and vice versa. We suggested the induction number as a selection criteria of amplitude or phase component to calculate apparent resistivity. Based on our study, we have developed a numerical algorithm, which computes appropriate apparent resistivity corresponding to measured mCSEM data using grid search method. In addition, we verified the validity of the developed algorithm by applying it to the stratified gas hydrate models with various model parameters. Finally, by constructing apparent resistivity pseudo-section from the mCSEM responses with 2D numerical models simulating gas hydrate deposits in the Ulleung Basin, we confirmed that the apparent resistivity can provide the information on the geometric distribution of the gas hydrate deposit.