• Korean Journal of Optics and Photonics
• /
• v.23 no.1
• /
• pp.42-51
• /
• 2012

In this paper, injection-locking characteristics versus active layer structures in Fabry-Perot laser diodes (FP-LD) are compared. TE and TM gain spectra and peak gains versus carrier density in polarized and unpolarized multiple quantum well structures and in an unpolarized bulk structure are calculated. The calculated gain parameters are applied to a time-domain large-signal model to simulate the injection-locking characteristics. The results show that RIN in unpolarized FD-LDs is about 3 dB lower than that in a polarized FP-LD and that the eye characteristics of the unpolarized FP-LD are much better than those of the polarized FP-LD.

• Korean Journal of Optics and Photonics
• /
• v.31 no.4
• /
• pp.169-175
• /
• 2020

We design a polarization-independent dielectric multilayer thin-film diffraction grating for a spectral-beam-combining (SBC) system with a simple grating structure and low aspect ratio. To maintain the high quality of the SBC beam, we propose a multilayer mirror structure in which the wavefront distortion due to stress accumulation is minimized. Moreover, to prevent light absorption from contamination, an optimized design to minimize the grating thickness was performed. The optimally designed diffraction grating has 99.36% diffraction efficiency for -1st-order polarization-independent light, for incidence at the Littrow angle and 1055-nm wavelength. It is confirmed that the designed diffraction grating has sufficient process margin to secure a polarization-independent diffraction efficiency of 96% or greater.

• Korean Journal of Optics and Photonics
• /
• v.14 no.3
• /
• pp.224-229
• /
• 2003

We realized a depolarizer based on two 2$\times$2 directional couplers and single mode optical fiber. A reduction method for the degree of polarization is demonstrated by using computer simulation, which is verified experimentally. The degree of polarization is -20 dB for the polarized input beam of spectral width less than 0.05 nm. The experimental results verify that the polarization noise, which is due to the change of the input polarization state, can be reduced by making the fiber-ring delay-line length greater thanthecoherencelengthofthesource.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.3
• /
• pp.171-176
• /
• 2014

The polarization characteristics of ultracompact polarization-insensitive directional coupler (PIDC) based on double sandwiched rib-type waveguide are explored in detail by using longitudinal modal transmission-line theory (L-MTLT). To obtain the polarization-insensitive condition of ultracompact directional coupler, the coupling length and coupling efficiency as functions of the refractive index and thickness of sandwiched rib-type waveguide are analyzed for quasi-TE and quasi-TM modes. The numerical results show that the ultracompact polarization-insensitive coupler with hundreds of micrometer scales is realized by properly choosing structural and material parameters of double sandwiched layers. Furthermore, the influence of fundamental mode profile, which is distributed in lateral waveguide of coupler, on the coupler performance has been investigated.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.1
• /
• pp.239-244
• /
• 2016

The polarization characteristics of polarization-insensitive directional coupler based on double sandwiched rib-type and curved waveguides are explored in detail by using conformal transformation method (CTM) and longitudinal modal transmission-line theory(L-MTLT). To obtain the polarization-insensitive condition of polarization-insensitive curved directional coupler(PI-CDC), the coupling length and coupling efficiency according to the inner radius of PI-CDC are analyzed for quasi-TE and quasi-TM modes. The numerical results show that the PI-CDC with a few micrometer scales can be realized by properly choosing the curvature and structural and material parameters of double sandwiched layers. Furthermore, the mode profiles propagating through PI-CDC are evaluated, and the influence on coupler performance has been investigated.

• Korean Journal of Optics and Photonics
• /
• v.33 no.1
• /
• pp.22-27
• /
• 2022

We fabricate a polarization-independent dielectric multilayer thin-film diffraction grating for a spectral-beam-combining (SBC) system with a simple grating structure and low aspect ratio. Due to the refractive index and thickness error of the manufactured thin films, the diffraction efficiency of the fabricated diffraction grating was lower than that of the design. The causes of the errors were analyzed, and it was confirmed through simulation that diffraction efficiency could be compensated through an additional coating on the manufactured diffraction grating. As a result of sputtering an additional Ta₂O₅ layer on a fabricated diffraction grating, the diffraction efficiency was corrected and a maximum 91.7% of polarization-independent diffraction efficiency was obtained.

• Korean Journal of Optics and Photonics
• /
• v.18 no.5
• /
• pp.295-302
• /
• 2007

This paper presents a rigorous comparison of the design characteristics of polarization-insensitive directional coupler (DC) and multimode interference (MMI) coupler based on rib type waveguides, by using longitudinal modal transmission-line theory (L-MTLT). It shows that the multimode mixing and interference property of MMI can be structurally designed through the continuous evolution of the two-mode coupling property of DC. It also compares and analyzes the coupling efficiency along with the coupling length and the wavelength between polarization-insensitive DC and MMI. From the design properties obtained, it demonstrates for the first time the integration of polarization-insensitive DC or MMI with a Bragg grating and evaluates precisely the filtering characteristics. The numerical results reveal that the DC, as long as it is designed to have the same coupling length for TE and TM modes, has better performance than the MMI in polarization-insensitive filtering behaviour. However, it shows that the MMI with much less coupling length than DC is preferred in the miniaturization of integrated devices.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.2
• /
• pp.221-227
• /
• 2015

The polarization characteristics of nano-scale grating-assisted polarization-insensitive coupler (GA-PIC) consisted of double sandwiched rib-type layers are evaluated in detail by using modal transmission-line theory (MTLT) based on equivalent network. To obtain the polarization-insensitive condition of GA-PIC, the coupling lengths as a function of the refractive index and thickness of sandwiched rib-type layer as well as the grating thickness and period are analyzed for quasi-TE and quasi-TM modes. The numerical results show that the GA-PIC with hundreds of nanometer scale is realized by properly choosing structural and material parameters of double sandwiched layers and grating.

• Proceedings of the Optical Society of Korea Conference
• /
• 1996.09a
• /
• pp.94-94
• /
• 1996

• Korean Journal of Optics and Photonics
• /
• v.20 no.1
• /
• pp.48-52
• /
• 2009

We make a simple electrically controllable linear polarization rotator over $360^{\circ}$ without loss by using a thick ECB(electrically controlled birefringence) liquid crystal cell and a quarter wave plate at 514.5 nm wavelength. Its operating principle can be analyzed and explained by using simple polarization analysis and experimental data. We demonstrate that the degree of polarization of the rotator is 0.964 and the temporal variation for 1 week lies within ${\pm}1$ degree. We can easily solve the problem of nonlinearity of the dependence of the rotational angle of linear polarization on the applied voltage by changing the utilized voltage range or its fitting curve.