• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.8
• /
• pp.627-638
• /
• 2017

Expecting fatigue life of mounted radar in aircraft is very important when designing, because the mounted radar in aircraft is exposed to long-term external random vibration. Among the methods of predicting the fatigue life, Fatigue analysis method in frequency domain has continuously been proposed in this field. In this paper, four fatigue analysis methods in frequency domain, which are widely used, have been selected and compared with the results for Specimen fatigue test. As a result, Dirlik and Benascicutti-Tovo methods have been matched better with fatigue analysis in time domain than the method in frequency method through the comparison between the fatigue analysis method in time domain and the method in frequency domain by conducting the specimen fatigue test with strain gage. Based on the results of the specimen fatigue test, We have conducted fatigue analysis of mounted radar in aircraft with Dirlik and Benasciutti-Tovo methods in the finite element model, and confirmed that the required life was satisfying.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.19 no.4
• /
• pp.410-415
• /
• 2013

Acoustic target strength (TS) is one of the most considerable design elements for survival capacities of the submarine. It needs to reduce acoustic TS that submarines are getting larger and larger, Alberich anechoic coatings are widely used as the representative method. In this paper, the finite element method (FEM) is used to analyze the reflection and transmission coefficients of Alberich anechoic coatings, which have periodic unit cells. The FEM results are compared with experimental results in the literature. Moreover, acoustic TS for the submarine is analyzed by using that result. Finally, it is shown that acoustic TS (Case 1: 10dB, Case 2: 6dB) are reduced due to the use of Alberich anechoic coatings.

• Korean Journal of Weed Science
• /
• v.3 no.1
• /
• pp.50-56
• /
• 1983

A study was conducted to evaluate the weed population as affected by repeated application of fertilizers for 15 years (nonfertilized, PK, NK, NPK, NPK+Compost, NPK+Straw and NPK+lime). Alopecurus aequalis authority did not grow at all without P application and lime reduced the population of A. aequalis. Total number of weeds were the largest at 5-10cm soil layer and increased by application of compost and straw. Monochoria vaginalis dominated in NPK+compost and NP plot. Scirpus hotarui dominated in NPK+straw. Both Eleocharis kuroguwai and Potamogeton distinctus dominated in nonfertilized plot. Numbers of M. vaginalis and S. hotarui were larger low pH 6 while that of E. kuroguwai and P. distinctus at pH 6 to pH 7. Incidence of M. vaginalis and S. hotorui was great at pH's lower than 6, while E. kuroguwai and P. distinctus favored pH's ranging from 6 to 7.

• Electronics and Telecommunications Trends
• /
• v.21 no.2 s.98
• /
• pp.98-106
• /
• 2006

실시간 우편물류는 고객, 우편물류 담당자 그리고 운영자에게 적절한 정보를 적절한 시간에 제공하는 것이며, 우편물류 흐름과 물품을 실시간으로 통제, 관리하는 것이다. 실시간 우편물류는 기능적 요소와 경영성과 요소가 있다. 기능적 요소는 실시간 추적, 실시간 통제 그리고 실시간 모니터링이며, 경영성과 요소는 우편업무 흐름 관리와 우편업무 흐름의 최적화이다. 본 연구에서는 실시간 우편물류 구축을 위한 자동화와RTE 기술을 분석한다. 또한 자동화와 RTE 기술 도메인 아래에서 유비쿼터스, RFID, USN 등과 같은 인프라와 BPM, EAI, BAM, BI 시스템의 통합을 통한 실시간 우편물류구축을 위한 적용 방법론을 제시한다.

• Journal of Korean Society for Geospatial Information Science
• /
• v.15 no.4
• /
• pp.89-96
• /
• 2007

The tunnel measurement data such as deficiency quantity, outbreak quantity, inner displacement and crown settlement are very important elements in tunnel sites under construction and obtained mostly by displacement gauge and total station. However, it is difficult and dangerous to install targets or measurement equipments on the points in tunnel construction site and also we need several persons to work in the tunnel. Non-prism total station with remote control system which is developed recently has various efficient functions for tunnel measurement. Therefore, for efficient tunnel measurement, this study suggested one person surveying system which consisted of non-prism total station and notebook PC to control total station remotely, and we evaluated the suggested tunnel measurement system. In this study, the tunnel site under construction was chosen as the test field and tunnel surveying was done by existing surveying method and suggested method separately. As result of the test, we analyzed processing time and accuracy to demonstrate the superiority of suggested one person non-prism surveying system.

• Spatial Information Research
• /
• v.15 no.2
• /
• pp.123-134
• /
• 2007

The building boundary should be registered in the cadastral map for the protection of property using the expansion of the registration items in the cadastral record and the construction of 3D-cadastral information system. In this study, the efficiency of registering the building boundary was suggested by non-target TS survey through the comparison between target TS and non-target TS survey about an accuracy and efficiency. At the result of this research, the RMSE of target TS and non-target TS survey is the X; ${\pm}0.056m$ and Y; ${\pm}0.043m$. Therefore, non-target TS survey shows the high accuracy. Also, the non-target TS survey is more efficient cost on time and personnel than target TS.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.9
• /
• pp.1069-1075
• /
• 2013

An effective method is necessary for the real-time analysis of an unmanned military robot. To achieve highly efficient simulations, a subsystem synthesis method has been developed. The subsystem synthesis method separately generates equations of motion for the base body and for the subsystem. The equations of motion are expressed by DAE, which consist of differential equations and algebraic equations. To increase the accuracy and efficiency of solutions, DAE solvers such as the Direct, CS (Constraint Stabilization), and GCP (Generalized Coordinate Partitioning) method are employed. In this study, the subsystem synthesis method is applied for effective multi-body dynamics analysis of an unmanned military robot, and a comparative study of three different DAE solvers is carried out.

• Proceedings of the Korea Institutes of Information Security and Cryptology Conference
• /
• 2003.12a
• /
• pp.221-226
• /
• 2003

인터넷과 같이 신뢰할 수 없는 네트워크를 통한 통신에서는 비밀성과 무결성 뿐만 아니라 원격의 사용자 인증이 시스템 보안에 있어서 중요한 요소이다. 패스워드 기반의사용자 인증 방법은 비용과 효율성 측면에서 갖는 장점 때문에 가장 널리 사용되는 사용자 인증 방법이다. 본 논문에서는 최근에 Lin［5］등이 제안한 패스워드 기반의 인증방법인 SE-OSPA 프로토콜을 분석하고, 그 결과 DoS 공격에 취약함을 보인다. 또한 DoS 공격에 대응할 수 있는 개선된 스킴을 제안한다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.15 no.1
• /
• pp.85-94
• /
• 2002

In this study an adaptive node generation procedure in the Element-free Galerkin (EFG) method using bubble-meshing technique is Proposed. Since we construct the initial configuration of nodes by subdivision of background cell, abrupt changes of inter-nodal distance between higher and lower error regions are unavoidable. This unpreferable nodal spacing induces additional errors. To obtain the smooth nodal configuration the nodal configurations are regenerated by bubble-meshing technique. This bubble meshing technique was originally developed to generate a set of well-shaped triangles and tetrahedra. In odder to evaluate the effect of abrupt changes of nodal spacing, one-dimensional problems with various nodal configurations mere investigated. To demonstrate the performance of proposed scheme, the sequences of making optimal nodal configuration with bubble meshing technique are investigated for several problems.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1994.10a
• /
• pp.238-243
• /
• 1994

본 논문에서는 여러가지 형태의 결합부에 적용할 수 있는 일반적인 모델링 기법에 대하여 기술하였다. 기존의 해석방법은 특정한 결합부에만 적용이 가능하고 유한요소해석과 실험이 상호 보완적인 관계를 가진 형태의 해석방법이므로 실험이 불가능한 경우에 대해서는 적용하기 어려운 경우도 있다. 본 논문에서는 별도의 실험을 수행하지 않고 결합부 영역만을 상세하게 유한요소 모델링을 하여서 선택된 자유도에 대한 유연성 행렬(Flexibility Matrix)을 구하여 결합부의 특성을 구하는 일반적 모델링 기법을 제시하였다. 이 방법은 수치적으로 축약할 수 없는 모델-결합부가 접촉면(Contact Surface)을 가지고 있는 구조물을 효과적으로 축약할 수 있는 장점이 있다. 또한 모델링되는 결합부의 경계조건의 영향을 배제할 수 있으며 결합부에 존재하는 비선형성도 적정범위내에서 선형화할 수 있다. 제시한 일반적 모델링 기법을 나사 결합부, 접착제 결합부(Glued Joints), 볼트 결합부에 적용하여 결합부이 특성을 구하였으며 실험을 통하여 제시한 해석방법의 타당성을 검증하였다.