• 제목/요약/키워드: 무연탄

검색결과 119건 처리시간 0.023초

벤치규모 가압유동층연소로에서 석회석에 의한 국내무연탄의 탈황특성 (Desulfurization Characteristics of Domestic Anthracite by Limes at Bench Scale Pressurized Fluidized Bed Combustor .)

  • 한근희;류정인;진경태
    • 대한기계학회논문집B
    • /
    • 제25권10호
    • /
    • pp.1373-1383
    • /
    • 2001
  • The desulfurization characteristics of anthracite in a bench scale pressurized fluidized bed combustor are investigated. The coal used in the experiment is domestic anthracite from Kangwon Taeback area. The desulphurization experiment is performed with limestone from Chungbuk Danyang. The pressure of the combustor is maintained at 6 atm, and the combustion temperatures are 850, 900, and 950$\^{C}$. The superficial gas velocities are 0.9, 1.1, and 1.3 m/s. The excess air ratio is varied from 5 to 35%. The Ca/S mole ratios are 0.5, 1.5, 2.5 and 4.5 mole. All experiments are executed at 2m bed height. Consequently, SO$_2$ concentration in the flue gas is increased with incresing bed temperature and superficial gas velocity. However SO$_2$ concentration is decreased with incresing excess air ratio and Ca/S mole ratio.

무연탄을 열원으로 한 연도측위 내부 송풍식 목재 건조실의 제작에 관하여 (A Study on the Efficiency of Smoke-pipe, Internal-fan Type Dry Kiln Heated with Smokeless Coal)

  • 조재명;유필수;정병재
    • Journal of the Korean Wood Science and Technology
    • /
    • 제2권2호
    • /
    • pp.13-21
    • /
    • 1974
  • 1. In the past, the smoke-pipe type dry kiln being characterized by the low cost of installation and easy operation was only used by the small scale of wood processing enterprisers for drying softwood and finishing air-dried stocks that were belonged to easy drying properties. The smoke-pipe type dry kiln usually was not suitable for drying hardwoods and green woods because of the difficulties of controlling drying conditions. 2. However, the smoke-pipe type dry kiln heated with smokeless coal which was designed and constructed by the authers was demonstrated to maintain higher accuracy of controlling temperature and humidity than the other smillar types of kiln. Also, since it was constructed with home made equipments, it is supposed to offer the opportunity to install the kiln by the small scale of wood processing enterprisers who could not install the dry kiln because of economical and technical difficulties. Thus, it is expected that promoting the spread of installing the dry kiln will realize the rational use of wood.

  • PDF

국내 무연탄의 순환류동층 보일러에서 탈황 특성 연구 (A Study of Desulfation Characteristics of Circulating Fluidized Bed Combustion for Domestic Anthracite)

  • 정진도;김장우;하준호
    • 한국대기환경학회지
    • /
    • 제20권4호
    • /
    • pp.429-436
    • /
    • 2004
  • Circulating fluidized bed combustion (hereafter CFBC) technology enables an efficient combustion for the materials with low heating values such as high ash coal and sludges. It also has desulfation function by adding limestone directly to combustor. The CFBC has been considered as one of the best processes for low grade coal containing with large contents of ash and sulfur. In this paper, in order to various tests were performed to find the optimum desulfation condition for CFBC using Korean Anthracite. We surveyed possible parameters and conducted desulfation efficiency test in D Thermal Power Plant. In addition, the result of some fundamental theoretical consideration was discussed with CFBC. Optimum limestone size could be considered to be 0.1-0.3mm irrespective of combustion temperature and Ca/S molar ratio variation. Desulfation efficiency increased as the molar ratio increased. Because desulfation process occurs at the surface at higher temperature, inner side of limestone can't be utilized. When surface area is not appropriate, some SO$_2$ emit without reaction. Optimum molar ratio should be decided after considering chemical and physical properties of limestone and coal thoroughly such as particle size, pore size and HGI. Commercial CFBC is operated at Ca/S 1.6. Combustor temperature 840-87$0^{\circ}C$ shows good desulfation efficiency.

급성 일산화탄소중독성 난청의 10례 (10 Cases of Hearing Loss due to CO Intoxication)

  • 김기령;김영명;김귀언;이만응
    • 대한기관식도과학회:학술대회논문집
    • /
    • 대한기관식도과학회 1977년도 제11차 학술대회연제 순서 및 초록
    • /
    • pp.3.2-3
    • /
    • 1977
  • 우리나라에서는 우리들의 현실생활에서 겨울철의 주연료가 되고있는 연탄과 무연탄으로 인한 일산화탄소 중독환자를 많이 보아봤으며, 우리나라 가구의 약 90%가 연탄등을 주연료로 사용하고 있는 현실에서 볼 때 CO중독에 따른 잇달은 사고는 사회적으로도 중요한 문제가 될 뿐아니라 이런 CO 중독의 후유증으로서 유발되는 청력손실 또한 큰 문제가 아닐 수 없다. CO 중독성난청은 혼수상태의 기간 및 고압산소기의 사용유무등에 따라서 크게 영향을 받으며 대부분 전정기의 장애를 동반한 감음신경성난청의 형태로 나타나는 경우가 많다. Lumio (1948)는 만성 CO 중독환자 700례중에서 73.3%의 감음신경성난청을 보고한바 있으며, Strzelczyk (1964)는 CO 중독성난청의 대부분이 만성중독에 의한 것임을 밝히는 한편 이들의 60%가 와우신경절후 병변임을 증명하였다. 난청만을 유발한 급성 CO 중독 증례는 그의 발생환경에서 고찰해 볼 때에도 외국에서는 매우 드물 례라고 하겠으나 특히 우리나라에서는 이때까지 이와 같은 증례를 보게되는 경우가 많았으며, 금번 저자들은 난청을 동반한 CO 중독환자 10명을 경험하여 청각학적 고찰을 실시한바 있기에 이에 보고하는 바이다.

  • PDF

저급탄의 열분해 및 촤-$CO_2$ 가스화 반응의 속도론적 연구 (Kinetic Studies of Pyrolysis and Char-$CO_2$ Gasification on Low Rank Coals)

  • 강석환;류재홍;박수남;변용수;서석정;윤용승;이진욱;김용전;김주회;박삼룡
    • Korean Chemical Engineering Research
    • /
    • 제49권1호
    • /
    • pp.114-119
    • /
    • 2011
  • 인도네시아 아역청탄인 ABK탄과 중국 갈탄(lignite)과 같은 저급탄에 대한 열분해와 촤-$CO_2$ 가스화반응에 대한 실험을 비등온의 승온 조건에서 열중량분석기(Thermogravimetric analysis, TGA)를 이용하여 수행하였다. 열분해 속도는 2단계, 1차의 열분해 모델(Kissinger 법의 변형)에 의해 잘 모사되었다. 촤의 $CO_2$ 가스화반응은 수축 핵 모델에 적용하여 초기의 활성화 에너지가 ABK탄은 189.1 kJ/mol, lignite는 260.5 kJ/mol의 값을 얻었으며, 수축 핵 모델에 의해 잘 모사되었다. 특히, 촤의 $CO_2$ 가스화반응에서 활성화 에너지는 무연탄의 결과와 유사하였으며, 다른 모델이나 석탄의 종류에 따라 큰 차이를 보였다.

Fly Ash 비료화(肥料化) 연구(硏究) -IV. Fly Ash를 이용(利用)한 지효성(遲效性) 가리(加里) 비료(肥料) 개발(開發) (Utilization of Fly Ash as a Source of Mineral Fertilizers -IV. Development of Slowly Released K Fertilizer)

  • 신제성;성기석;최두회
    • 한국토양비료학회지
    • /
    • 제27권1호
    • /
    • pp.10-14
    • /
    • 1994
  • 지효성 K비료는 KOH, KCl 등 속효성 K원료와 Fly ash중 난용성 K를 이용하였고 소성시 보조제로서 부연탄가루, $Mg(OH)_2$, $K_2CO_3$와 Borax를 혼합하여 제조하였다. 목표 K함량에 맞게 원료와 보조제 혼합비율이 결정되었으며 무연탄가루와 $Mg(OH)_2$의 적정 배합비율은 각각 12%, 3%이었으며 소성온도는 $850^{\circ}C$, 소성시간은 30분이 적정선으로 판명되었다. 시제품은 소성온도가 낮고 소성시간이 짧은 경우 시제품의 특성에 부적합하였다. 제조된 시제품의 K성분은 지효화되어 목표치에 부합되었다.

  • PDF

200 MW급 무연탄 발전용 탈황 흡수탑에서 적정 슬러리pH (Desirable pH of Slurry in the Desulfurization Absorber for a 200 MW Anthracite Power Plant)

  • 최현호;유호선
    • 플랜트 저널
    • /
    • 제16권1호
    • /
    • pp.38-43
    • /
    • 2020
  • 본 연구에서는 무연탄용 서천화력발전소 1호기가 대기환경보전법 및 서천화력발전본부 내부 규정인 이산화황 평균 배출 규제치를 준수하며 연속운전 할 수 있는 흡수탑 내부의 석회석 슬러리 pH의 적정 운전범위를 찾고자 실험 하였다. 연소가스의 유량등 주요 운전요소를 고정한 상태에서 탈황 흡수탑으로 유입되는 연소가스 내의 이산화황 농도, Cin[ppm]을 370, 400, 460 그리고 550 ppm으로 변동시키며 운전하였을 때, 탈황 흡수탑 내부 적정 슬러리 pH는 4.4, 4.5, 4.8 그리고 5.1이었다. 따라서, 이산화 황과 적정 슬러리 pH를 이용하여 도출된 상관관계식 RpH=0.004×Cin+2.93을 이용하여 운전하는 것을 추천한다.

무연탄 화력발전소의 이산화탄소 배출계수 개발 (Development of Emission Factors for Greenhouse Gas CO2) from Anthracite Fired Power Plants in Korea)

  • 전의찬;명수정;정재학;이성호;사재환;노기환;김기현;배위섭
    • 한국대기환경학회지
    • /
    • 제23권4호
    • /
    • pp.440-448
    • /
    • 2007
  • Although the anthracite power plant is an important source of greenhouse gas, research on this type of power plant has not been conducted much. The present study investigated the entire anthracite power plants in Korea and analyzed the emitted gas in connection with GC/FD and a methanizer in order to develop $CO_2$ emission factors. The study also sampled the anthracite to analyze the amount of carbon and hydrogen using an element analyzer, and to measure the calorie using an automatic calorie analyzer. The emission factors computed through the fuel analysis was 30.45 kg/GJ and that computed through the $CO_2$ gas analysis was 26.48 kg/GJ. The former is approximately about 15% higher than the latter. When compared the carbon content factors of anthracite with that of bituminous coal, the value of anthracite was 24% higher Compared with IPCC values, the emission factors by the fuel was 14% higher, and that by the emitted $CO_2$ gas was about 1.2% lower. More research is needed on our own emission factors of various energy-consuming facilities in order to stand on a higher position in international negotiations regarding the treaties on climate changes.

국내 무연탄 화력발전소의 온실가스 배출계수 개발 - CH4, N2O를 중심으로 - (Development of Greenhouse Gas (CH4 and N2O) Emission Factors for Anthracite Fired Power Plants in Korea)

  • 이시형;김진수;이성호;사재환;김기현;전의찬
    • 한국대기환경학회지
    • /
    • 제25권6호
    • /
    • pp.562-570
    • /
    • 2009
  • Although anthracite power plant acts as the important source of greenhouse gas emissions, relatively little is known about its emission potentials. Especially, because the emissions of Non-$CO_2$ greenhouse gas $CH_4$ and $N_2O$ are strongly dependent on fuel type and technology available, it is desirable to obtain the information concerning their emission pattens. In this study, the anthracite power plants in Korea were investigated and the emission gases were analyzed using GC/FID and GC/ECD to develop Non-$CO_2$ emission factors. The anthracite samples were also analyzed to quantity the amount of carbon and hydrogen using an element analyzer, while calorie was measured by an automatic calorie analyzer. The emission factor of $CH_4$ and $N_2O$ computed through the gas analysis corresponded to 0.73 and 1.98 kg/TJ, respectively. Compared with IPCC values, the $CH_4$ emission factor in this study was about 25% lower, while that of $N_2O$ was higher by about 40%. More research is needed to extend our database for emission factors of various energy-consuming facilities in order to stand on a higher position.

무방류 ACE System을 이용한 유기성폐기물의 동시처리 및 에너지 기술 개발 (Production of Solid Fuel and Concurrent Treatment of Livestock waste Using Zero Discharge ACE System)

  • 이행석;조은민;탁종호;이재현;이재원;김정언;최성길
    • 유기물자원화
    • /
    • 제20권2호
    • /
    • pp.20-23
    • /
    • 2012
  • 본 연구는 유기성폐기물을 처리하고 그것을 이용하여 고체연료 또는 퇴비를 생산하는 종합시스템에 관한 것이다. 유기성폐기물은 90% 전후의 높은 함수율을 나타내고 있기 때문에 처리에 중점을 두어야 할 부분이 수분 처리 방법이다. 따라서 기존의 처리방법으로는 고액분리하여 처리 후 하천에 방류하는 시스템에 의해 처리되고 있다. 하지만 본 연구에서는 기술개발의 차별화 및 선행기술의 회피 전략을 위해, 유기성폐기물의 수분을 건조시키는 방법으로 미생물이 유기성폐기물의 유기물을 분해하여 발생 되는 $80^{\circ}C$ 이상의 열에너지에 의해 수분을 제거하는 발열반응을 적용하여 수분을 제거하는 무방류시스 템이다. 뿐만 아니라 고체연료의 발열량을 높이기 위해서 무연탄, 코크스, 기름 등의 열량보조제를 첨 가하는 대신에 유기성폐기물을 첨가 한 후 적당한 발열반응 및 건조시켜 고체연료를 제조하는 방법으 로 4,000kcal/kg 이상의 높은 발열량을 얻을 수 있으며 불완전연소 등에 의한 2차 오염을 방지할 수 있는 기술이다. 따라서 친환경 미생물 발열반응에 의해 유기성폐기물을 저렴한 비용으로 액상 및 고상 을 동시에 처리 할 수 있으며, 고체연료를 제조할 수 있는 새로운 신기술이다.