• Journal of Korea Multimedia Society
• /
• v.14 no.3
• /
• pp.433-439
• /
• 2011

The positioning system based on wireless AP collects AP information distributed in the real world, stores it into database, and measures the position objects by comparing with searched AP information. The existing fingerprinting method is a probabilistic modeling method that acquires much of the data collected from one location upon database composition, and stores the average of the data for the sake of use it in positioning objects. Using the average value, however, may cause the probability of errors Such errors are fatal weaknesses for services based on the accurate position. This paper described the characteristics and problems of the previously used wireless AP positioning system, and proposed a method of using the AP DB and an MSS mechanism for outdoor positioning in order to solve the aforementioned problems. And the results obtained from experimental tests showed that the proposed method achieved very low error rate(27%) compared with the existing method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.1C
• /
• pp.87-95
• /
• 2010

In this paper, we propose an improved TDoA (Time Difference of Arrival) localization scheme using PSO (Particle Swarm Optimization) in UWB (Ultra Wide Band) systems. The proposed scheme is composed of two steps: re-estimation of TDoA parameters and re-localization of a tag position. In both steps, the PSO algorithm is employed to improve the performance. In the first step, the proposed scheme re-estimates the TDoA parameters obtained by traditional TDoA localization to reduce the TDoA estimation error. In the second step, the proposed scheme with the TDoA parameters estimated in the first step, re-localizes the tag to minimize the location error. The simulation results show that the proposed scheme achieves a more superior location performance to the traditional TDoA localization in both LoS (Line-of-Sight) and NLoS (Non-Line-of-Sight) channel environments.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.411-413
• /
• 2010

The wireless AP positioning system is under active progress regarding research and commercialization due to its merit of being able to overcome the representing demerits of existing GPS positioning, which are signal distortion and poor signal reception. This system's feature is to collect AP information distributed throughout the real world, store it on database, and execute positioning by comparing with searched AP information. The positioning process uses collected data, whereas comparison of database data uses the fingerprinting method. The fingerprinting method is a probabilistic modeling method that acquires as much of the data collected from one location upon database composition, to store the value's average value and use it in positioning. Yet, using the average value may contain the probability of errors. Such errors are fatal weaknesses for services based on the background of accurate positioning. This paper deals with the characteristics and problems of the previously used wireless AP positioning system, and proposes measures of using AP information for outdoor positioning in order to solve the aforementioned problems.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.11C
• /
• pp.1098-1105
• /
• 2009

In this paper, we propose an asynchronous UWB (Ultra Wide Band) Positioning scheme that can provide precise positioning performance with low complexity and low power consumption. We also present the residual test to improve the positioning performance in multipath channels having heavy NLoS (Non-Line of Sight) components. As compared to conventional ToA (Time of Arrival) positioning scheme that requires round-trip transmissions as many as the number of beacons, the proposed UWB positioning scheme effectively decrease power consumption and processing delay since a single round-trip transmission is only required. Also, as compared to conventional TDoA (Time Difference of Arrival) positioning scheme requiring precise synchronization among the beacons, asynchronous nature of the proposed scheme achieves very low system complexity. Through simulations in LoS (Line of Sight) channel models, we observe that the proposed scheme requires low system complexity, low power consumption, while providing positioning performance of almost the same accuracy as the conventional ToA and TDoA positioning schemes. In addition, the proposed scheme by employing the residual test achieves accurate positioning performance even in multipath channels having heavy NLoS components.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.12A
• /
• pp.1128-1135
• /
• 2010

A wireless positioning system using ultra-wideband (UWB) for indoor wireless positioning uses ranging data in order to accurately estimate location. Commonly, ranging uses time of arrival (TOA), time difference of arrival (TDOA) based on arrival time. The most fundamental issue in the ranging for wireless positioning is to obtain clock synchronization among the sensor nodes and to correct an error caused by the relative clock offset from each node. In this paper, we propose ranging and positioning technique using common clock in order to solve both clock synchronization and clock offset problems. To verify the performance of proposed, we simulated ranging and positioning in channel model introduced by IEEE 802.15.4a Task Group and then results show that location estimation is unaffected by clock offset.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37C no.9
• /
• pp.774-783
• /
• 2012

A simple, accurate, secure, long-lasting, and portable hybrid positioning system is proposed and designed in this paper. It consists of a lighting LED that generates visible light data corresponding to position information of a target and a Zigbee wireless network communication module with low power, security, and service area expansion characteristics. Under an indoor environment where there is 23.62m distance between an observer and the target, the presented hybrid positioning system is tested and is verified with the functions of Zigbee three hop wireless networking and visible light communication (VLC) scheme. The test results are analyzed and discussed.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2013.11a
• /
• pp.921-924
• /
• 2013

최근 무선랜 기반 실내 측위시스템을 활용하는 위치정보 서비스가 주목을 받고 있다. 기존 측위 방식에서는 주로 삼각측량 기법에 의존하여 사용자 단말의 위치를 측정하고 있으나, 실내 벽 등의 장애물로 인하여 정확한 측위가 어려울 뿐만 아니라 측위 오차가 크다는 문제점이 있다. 본 논문에서는 무선랜 기반 실내 측위시스템에서 방(room) 등의 블록(block) 단위로 사용자의 위치를 측정하는 방법을 제시한다. 실험 결과, 제안 방식은 기존 방식에 비해 측위 오차를 50% 이상 감소시킬 수 있음을 확인하였다.

• Journal of KIISE:Information Networking
• /
• v.34 no.5
• /
• pp.389-395
• /
• 2007

It is necessary to research on wireless position determination technology that enables location based services on Portable Internet. In this paper, I consider the position determination technology based on TDOA belong to trilateration method. That is using the difference of relative distance between base stations and terminal due to the time difference of arrival of downlink signal. In order to design the positioning server, This paper reviews the related research on current status of wireless position determination technology based on TDOA on Portable Internet. And then, it is suggested that system architecture, network interface, the calculation model for position determination, which are adapted to circumstance of portable Internet. Through this research on the positioning server, it is expected to guarantee that low cost and high efficiency of wireless positioning server on Portable Internet will be developed.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2011.04a
• /
• pp.441-444
• /
• 2011

최근 IT분야의 눈부신 발전으로 Web 3.0의 시대를 맞아 유비쿼터스 시대에 점점 다가가고 있다. 그리하여, 일반 이용자도 전문 기술자들의 지식을 인터넷이나 스마트 폰과 같은 통신매체를 통해 쉽게 습득 할 수 있게 되어, 측량과 같은 전문적인 분야도 일반 사용자가 원할 때는 언제, 어디서나 사용할 수 있도록 하기 위해 연구를 진행 하였다. 본 논문의 목적은 전파를 통해 언제, 어디서나, 누구나 지식을 요하지 않아도 정적, 동적 객체 위치 개념의 정보, 해석, 관리 등을 할 수 있는 무선 측위 네트워크를 구축하기 위해, 실내에 무선 네트워크 망을 구성하여, 1차원 또는 2차원, 장애물 투과성, 이동 객체 대상물의 측위를 통하여, U-Surveying을 위한 기초 실험을 하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.1
• /
• pp.131-140
• /
• 2013

Due to the limitations of the existing indoor positioning system depending on the radio wave, at present, it is required to introduce a new method in order to improve the accuracy in indoor environment. Recently, bio-inspired technology has become the future core technology. Thus, this study examined the accurate positioning method applying the abilities that animals with homing instinct measure their position by searching geomagnetic field with the use of their biomagnets. In order to confirm the applicability of geomagnetic field, a new source for indoor positioning, this study separated the constituent materials and building structure and designed the structures that can carry the actual magnetic field sensor and the data collection module. Subsequently, this study investigated the applicability of geomagnetic field as a positioning source by establishing the positioning system of Fingerprint method. In performance evaluation of the positioning system, the geomagnetic strength-based positioning system was similar to or approximately 20 percent higher than the wireless LAN-based positioning system in the buildings with the existing wireless LAN. Thus, in the environment without infrastructure for indoor positioning, the geomagnetic, an independent earth resource, can make it possible to realize the indoor positioning.