• Proceedings of the KIPE Conference
• /
• 2015.11a
• /
• pp.35-37
• /
• 2015

본 논문은 전력구 내 지중선에서 발생하는 상용주파수(60 Hz) 자기장을 이용한 2 W급 무선전력 수신장치를 제안한다. 제안하는 수신장치는 자성체와 구리도선을 포함하는 수신 코일, 장치의 개폐를 위한 손잡이, 직렬공진회로 및 정류기를 포함하는 부가회로로 구성된다. 수신장치는 3상 지중선 중 하나에 설치되어 전력구 내 조명 및 온습도 센서를 구동하는데 사용 가능하다. 수신장치의 자성체로는 높은 기계적 강도 및 포화 자속밀도를 가지는 규소강판 박편이 사용되었으며, 직렬공진회로를 사용하여 최대전력을 수신하였다. 수신장치의 공진회로는 3 이하의 낮은 공진계수를 가지기에 50 Hz 및 60 Hz 지중선에 범용으로 사용이 가능하다. 사용된 규소강판 및 구리선의 무게와 가격의 곱을 성능지수(Figure of Merit)로 선정하여 이를 최소화하는 설계를 수행하였다. 제작된 시작품의 무게는 약 750 g중으로 2.2 W LED부하 구동이 가능하며, 이때 지중선의 전류는 $100A_{rms}$로 가정하였다.

• Proceedings of the KIPE Conference
• /
• 2020.08a
• /
• pp.334-335
• /
• 2020

본 논문에서는 레이저 광원을 적용한 무선전력전송 시스템에 적용되는 PV 모듈의 출력 특성을 분석하고, PV 모듈로부터 최대 전력을 발생시키면서 배터리를 충전시킬 수 있는 컨버터 개발 결과를 제시한다. 먼저, 특정 파장에서 최대전력이 발생되도록 개발된 PV 수신모듈에 레이저 빔을 조사하였고, 레이저에 공급되는 전력 크기에 따른 PV 모듈의 전압-전류의 특성 데이터를 확보하였다. 전압/전류 특성 데이터로부터 PV 수신모듈의 소신호 저항을 분석하였고, 이를 컨버터 회로모델에 적용함으로써 제어기 설계를 위한 시스템의 전달함수를 유도하였다. 이로부터 레이저 일사량에 따른 전류원/전압원 전영역에서 PV 모듈의 입력전압을 안정적으로 제어할 수 있는 제어기를 설계함으로써 레이저 수신용 PV 모듈이 최대 전력을 발생시킬 수 있도록 하였다. 본 논문에서 제안된 방법은 MCU 제어기반 25W급 배터리 충전용 부스트 컨버터의 프로토타입 제품을 통해 실험 검증되었다.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.1
• /
• pp.22-26
• /
• 2016

In this paper, using the globular structure designed and implemented for the transmitter and the receiver resonant wireless power transfer(WPT). The coil of the transmitter was proposed to emit a magnetic energy in three-dimensional space by winding a ball shape. Each side of the transmitter has been designed to obtain a high Q value by a spiral structure. This solves the problem that the transfer efficiency decreases rapidly depending on the location in the conventional WPT. The resonance frequency is used 6.78 MHz and the distance between the trasnitter and the receiver is 200 mm. The transfer efficiency of the proposed WPT system is higher than 40% at all direction.

• KIPS Transactions on Computer and Communication Systems
• /
• v.13 no.1
• /
• pp.21-30
• /
• 2024

As the self-driving car market continues to grow, the need for charging infrastructure is growing. However, in the case of a wireless charging system, stability issues are being raised because it requires a large amount of power compared with conventional wired charging. SAE J2954 is a standard for building autonomous vehicle wireless charging infrastructure, and the standard defines a communication method between a vehicle and a power transmission system. SAE J2954 recommends using physical media such as Wi-Fi, Bluetooth, and UWB as a wireless charging communication method for autonomous vehicles to enable communication between the vehicle and the charging pad. In particular, UWB is a suitable solution for indoor and outdoor charging environments because it exhibits robust communication capabilities in indoor environments and is not sensitive to interference. In this standard, the process for building a wireless power transmission system is divided into several stages from the start to the completion of charging. In this study, UWB technology is used as a means of fine alignment, a process in the wireless power transmission system. To determine the applicability to an actual autonomous vehicle wireless power transmission system, experiments were conducted based on distance, and the distance information was collected from UWB. To improve the accuracy of the distance data obtained from UWB, we propose a Single Model and Multi Model that apply machine learning and deep learning techniques to the collected data through a three-step preprocessing process.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.48 no.6
• /
• pp.34-42
• /
• 2011

With the progress of USN technology, fields to which wireless sensor node is applicable are increased under a condition that it holds a lot of problems to solve for betterment. One of the problems which acts as an obstacle to USN industry diffusion is the wireless sensor node battery exchange to their individual life cycle. Exchanging the battery of so many sensor nodes one by one requires a great deal of times and costs. Such problem is against the convenience supply -aim by applying USN technology. In this paper, using RF wireless power transmission system that power transmission / harvesting module from a distance of 5 m and the power of 10 dBm with a current of 1 mA or more for Sensor Nodes in lithium-polymer battery charging system tested and verified.

• KEPCO Journal on Electric Power and Energy
• /
• v.7 no.2
• /
• pp.215-220
• /
• 2021

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.7A
• /
• pp.686-693
• /
• 2007

In this paper, we describe how to set up/down step-size in open loop power control for WiBro reverse link. Since open loop power control does not use feedback information, it is difficult to efficiently use wireless resource with accurate power control. We also provides a method of estimating levels of noise and interference. With numerical investigation, asymmetric up/down power-control step-size is shown to be promising to achieve high sector throughput as well as low error rate.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.7A
• /
• pp.755-761
• /
• 2007

In this paper the uplink single carrier scheme is proposed for wireless Internet application and its performance is evaluated in terms of PAPR (peak to average power ratio) and ABR (achievable bit rate) compared with the uplink OFDM scheme. There exist constraints regarding the signal amplification because the non-linear amplifier should be exploited instead of the linear amplifier due to its high cost of linear amplifier and power inefficiency at the WiBro terminal. Therefore characteristics in the uplink scheme design are discussed in order to maximize ABR and relieve the requirements for the amplifier specifications.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.5
• /
• pp.123-129
• /
• 2014

This paper suggests that it provides a electricity management system for wasting electricity, from power demand growth environments. This Energy management system based on ICT(Information & Communication Technology) can control Smart Power Outlet connecting to this system with Web Browser and Android phone, anytime, anywhere. Through analysis of acquisition data from them, this proposed system can monitor and control power consumption efficiently. This system was organized mesh network of Smart Power Outlet, gateway by wireless Zigbee, and ESS(Energy Saving System) by TCP/IP beyond existing limit of communication distance and space.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.5
• /
• pp.826-832
• /
• 2015

In wireless networks, it is important to guarantee the energy efficiency and receiver fairness for satisfying service provider and customer at the same time. In this paper, we propose a resource allocation algorithm which improves energy efficiency as well as receiver fairness based on optimization techniques. In the proposed algorithm, subchannel and power are allocated to receivers iteratively in the consideration of channel state information, amount of dissipated power, and receiver rate, in order to improve energy efficiency and receiver fairness. Through simulation, we show the effectiveness and superiority of the proposed algorithm in terms of energy efficiency and receiver fairness.