• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.5
• /
• pp.1-11
• /
• 2008

Wireless Sensor Networks is applied to improvement of life convenience or service like U-City as well as environment pollution, tunnel and structural health monitoring, storm, and earthquake diagnostic system. To increase the usability of sensor data and applicability, mobile devices and their facilities allow the applications of sensor networks to give mobile users and actuators the results of event detection at anytime and anywhere. In this paper, we present MUSNEMO(Multi-sensor centric Ubiquitous Smart sensor NEtwork using Mobile devices) developed system for providing more efficient and valuable information services with a variety of mobile devices and network camera integrated to WSN. Our system is performed based on IEEE 802.15.4 protocol stack. To validate system usability, we built sensor network environments where were equipped with five application sensors such magnetic, photodiode, microphone, motion and vibration. We also built and tested proposed MUSNEMO to provide a novel model for event detection systems with mobile framework.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.12
• /
• pp.2769-2774
• /
• 2013

The key of USN(Ubiquitous Sensor Network) technology is low power wireless communication technology and proper resource allocation technology for efficient routing. The distinguished resource allocation method is needed for efficient routing in sensor network. To solve this problems, we propose an algorithm that can be adopted in USN with making up for weak points of PQ and WRR in this paper. The proposed algorithm produces the control discipline by the fuzzy theory to dynamically assign the weight of WRR scheduler with checking the Queue status of each class in sensor network. From simulation results, the proposed algorithm improves the packet loss rate of the EF class traffic to 6.5% by comparison with WRR scheduling method and that of the AF4 class traffic to 45% by comparison with PQ scheduling method.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.5 no.4
• /
• pp.234-242
• /
• 2010

Two-way ranging methods such as TWR and SDS-TWR have been considered for many ranging systems because these methods are useful in the absence of synchronization. To estimate the location of a mobile node, complicated ranging procedures consisting of ranging frames between an anchor node and the mobile node are performed. Supporting multiple mobile nodes such as a few hundreds or thousands and several anchor nodes, the ranging procedures have the fatal disadvantage of processing delay and inefficient traffic bandwidth. On the other hand, the one-way ranging method is simple and fast, but susceptible to network synchronization. In this paper, we propose a method to modify asynchronous ranging equations to establish exact frequency or frequency offset, a method to estimate frequencies or frequency offsets, and a method to establish post-facto synchronization with anchor nodes. The synchronization for a node pair is adapted using instantaneous time information and corresponding difference of distances can be determined. We evaluate the performance of TWR, SDS-TWR and proposed ranging algorithms.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.445-448
• /
• 2007

In this paper, we present an energy efficient MAC protocol for WSN(Wireless Sensor Networks). WSN is a self organized network to collect environmental data by small size sensor nodes which consist of wireless communication unit, MPU, sensing module etc.. In the WSN, such sensor nodes operate with limited energy and how efficient use this network has been debated recently. Therefore. we present a method to consume energy equaly by modifying existing S-MAC for efficient scheduling and data transmission.

• Journal of Digital Contents Society
• /
• v.6 no.2
• /
• pp.131-135
• /
• 2005

Nowadays, the demand for the wireless technology has gradually increased to support the services of high speed wired internet and also the interest of a mobile terminal convergence has increased. In the next generation, the mobile terminal could merge with the celluar phone, wireless LAN, portable internet, digital multimedia brodcasting, mobile game and sensor(smart-tag and biometrics) through the unified single user interface. Moreover, the system is supported to multi-mode at difference networks, which have variable functions and high performance for available service. Inthis paper, we investigate the minimum requirements and the core technologies of the next generation mobile terminals.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.2
• /
• pp.312-320
• /
• 2010

Most online monitoring systems of running currently based on the wired network and local area wireless network generate an increase of administrative costs such as synchronization of data protocol conversion, flexible operation of measurement devices and maintenance. To solve this problem, this paper proposes the SMS data transmission protocol which allows multiple data collecting device to manage effectively including implementation method of cdma-based environmental information monitoring system. Also this paper shows operational safety of the proposed protocol and analyzes efficiency of data transfer and operating using SMS.

• Journal of the Institute of Convergence Signal Processing
• /
• v.12 no.3
• /
• pp.157-162
• /
• 2011

This study is about implementing wireless transferring system in pre-hospital cardiopulmonary resuscitation(CPR). Also, this study includes monitoring based feedback between patient and hospital to increase the survival rate of emergency patient by developing the performance of cardiopulmonary resuscitation in pre-hospital. It minimizes the loss of flow rate or gastric inflation through the space between the airway and the esophagus, which enables the inspiration-expiration rate to be measured more precisely. Due to these reasons this study applied ET insertion based respiratory sensor to measure flow rate. The main indices of artificial ventilation are justified from minute respiration(V), end-tidal $CO_2(E_TCO_2)$, and tracheal pressure($P_{tr}$). The simulation is performed to verify the bandwidth and delay time of transport network for in-hospital monitoring even as transporting images and voice information simultaneously. The total bandwidth is 815 kbps, and WLAN (IEEE 802.11x) is used as communication protocol. The network load is under 1.5% and the transmit delay time is measured under 0.3 seconds.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.3
• /
• pp.740-746
• /
• 2013

Machine to machine (M2M) communication is a converged ICT(Information and Communications Technology) platform which can utilize communications services among people and things anytime, any place in realtime. The M2M platform consists of three components; M2M area networks sensing and generating data of things by various sensors and devices; public networks transporting those data; and M2M applications utilizing the aggregated data. There exist however two practical obstacles to realize the M2M communications in terms of interoperability between the WCDMA-based public network and the local networks based on W-Fi or ZigBee; one is the cost problem required to access the public network, and the other is the lack of a cost-effective modem or gateway to connect two different networks. In this paper, we proposed and implemented a novel M2M platform based on PWW (Person Area Network) which can resolve those two issues by using a proposed gateway connecting the local network and smartphones as application devices without access the WCDMA-based public network. We have shown that the proposed platform is very practical to adopt to the real environment by actual testing with the own developed smartphone applications.

• Journal of Korea Multimedia Society
• /
• v.15 no.7
• /
• pp.885-890
• /
• 2012

In this Paper, we propose a Real-Time Localization Platform Built on WUSB (Wireless USB) over WBAN (Wireless Body Area Networks) protocol required for Wearable Computer systems. Proposed Real-Time Localization Platform Technique is executed on the basis of WUSB over WBAN protocol at each sensor node comprising peripherals of a wearable computer system. In the Platform, a WUSB host calculates the location of a receiving sensor node by using the difference between the times at which the sensor node received different WBAN beacon frames sent from the WUSB host. And the WUSB host interprets motion of the virtual object.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.8
• /
• pp.688-696
• /
• 2013

In wireless sensor networks, real-time applications have to ensure the timely delivery of real-time data. Recently, OMLRP (On-demand Multi-hop Look-ahead Routing Protocol) has been proposed to improve the timeliness of wireless sensor networks. The protocol needs initialization time to establish multi-hop information based routing path because it performs incremental look-ahead of the information. Consequently, the protocol deteriorates DDSR (Deadline Delivery Success Ratio) as an event moves because it takes little consideration of event mobility. In this paper, we proposed a Real-time Routing for Events Mobility (RREM) which exploits a data redirection in order to improve the DDSR of moving events. Instead of recollecting muti-hop look-ahead information, the RREM redirects the data to a sensor node holding the information collected in a previous round. We verify the timeliness and energy efficiency of RREM using various MatLab simulations.