• Proceedings of the Korea Information Processing Society Conference
• /
• 2009.11a
• /
• pp.197-198
• /
• 2009

다양한 서비스에서 활용되는 USN 환경에서 각 응용의 기술적 특성에 따른 다양한 계층별 프로토코 기술의 개발이 이루어 지고 있다. 본 논문에서는 무선 센서 네트워크의 다양한 프로토콜 개발에 필수인 분석기에 대한 것으로 무선 상의 여러 채널을 통해 송수신 되는 다양한 프로토콜을 쉽게 분석하는 장치의 구현에 대해 설명한다. XML을 활용하여 하드웨어 및 소프트웨어의 코드를 바꾸지 않고 사용자 정의에 따른 프로토콜 분석, 시나리오 검증 및 GUI 처리를 가능하게 하여 USN을 위한 센서 노드들의 성능 측정에 활용하고자 한다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.12
• /
• pp.2232-2240
• /
• 2017

IMO has made AIS and VHF mandatory for international sailing vessels through SOLAS, and korea if mandating specific vessels through the law for safety of vessels and the ship installation technology standards. However, due to various communication equipments and complicated usage method, malfunction occurs, and the response delay to the actual structure signal often causes human accidents. So recently, as a part of GMDSS modernization, maritime communication devices are attempting to interwork and integrate different types of marine communication system in order to construct a next generation maritime communication system. In this paper, we describe a technique to implement the DSC function by interlocking and integrating the AIS device and VHF. We will present the basis for achieving domestic technical standards and standardization through the linking algorithm of the data that can extract the ship information from AIS and utilize it the DSC function of VHF.

• The Journal of Korean Association of Computer Education
• /
• v.5 no.3
• /
• pp.19-25
• /
• 2002

Bluetooth, in radio network environment, is a small local radio communication that is available with low expense and little power use. It is specified for the wireless connect in a small area between Network Excess Point, portable devices such as mobile phones. PDAs and portable PCs, and other per peripheral equipment. Bluetooth is consisted of a master and a piconet having seven slaves in a maximum and finally has a scatternet gathering lot of piconet. The thesis tries to design the most effective structure of a scatternet by the number of nodes and the type of scatternet such as linear and ring for its mechanism. then the performance evaluation is realized through the Bluehoc simulator based on the NS. Finally the most appropriate radio network environment is made by the comparison and analysis of the characteristics of liner and ring scatternets.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.11
• /
• pp.2349-2354
• /
• 2009

Due to growth of electronics and control devices, automation and situational awareness systems have been applied by automobile. Vision systems with the introduction of unmanned system being actively developed, but are still high price and visual information is passed through the cable, because of cars are difficult to install. In this paper, can be installed inside the car at low-cost, simple image processing device through a wireless communication know the obstacles and the alarm system based on Zigbee wireless communication, infrared and ultrasonic sensors to monitor the situation through with easy parking cars outside the system design was implemented.

• Journal of Advanced Navigation Technology
• /
• v.22 no.4
• /
• pp.311-318
• /
• 2018

In this paper, test-bed for the evaluation of wireless communication system on a small launch vehicle is proposed. The proposed test-bed consists of antenna test-coupler, RF attenuators, and RF switch modules. The antenna test-coupler isolates antennas for each band and transmits / receives wireless signals. The RF attenuator and switch are used for path selection of testing signal path. In design and measurement result of the antenna test-coupler, the antenna test-coupler has shielding effect higher than 39.3, 47.1, 56.1 dB at UHF-, S-, X-band. Through testing on small launch vehicle wireless communication system, we were able to successfully transmit and receive data between each test system and launch vehicle with antenna path switching.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.355-358
• /
• 2009

Due to growth of electronics and control devices, automation and situational awareness systems have been applied by automobile. Vision systems with the introduction of unmanned system being actively developed, but are still high price and visual information is passed through the cable, because of cars are difficult to install. In this paper, can be installed inside the car at low-cost, simple image processing device through a wireless communication know the obstacles and the alarm system based on Zigbee wireless communication, infrared and ultrasonic sensors to monitor the situation through with easy parking cars outside the system design was implemented.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.5
• /
• pp.89-96
• /
• 2010

In this paper, "a wireless camera image transmission system" is aimed for the free camera shooting in the indoor and outdoor environments. Currently in broadcasting program production environments, because the cable connections between TV OB VAN(outside broadcasting VAN) and EFP camera or ENG camera have many obstacles and limits of distances, it is very unconvienent for the free camera shooting. Therefore in this paper, wireless image transmission device and receiving device in DVB-T broadcasting are developed. In this paper, analog composite image signal output camera, image signal compression MPEG-2 system and COFDM mage transmission system are produced and experimented. The results for the image and transmission system had good QoS values and from this results, it is possible to apply TV program productions and wireless CCTV device industries.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.05a
• /
• pp.522-523
• /
• 2022

In this paper, we design a gateway protocol architecture for building an IoT-based smart factory. A smart factory system consists of several terminal devices, gateways and servers, and connects them through a wireless network. The terminal device collects information from various sensors and transmits the information to the server through the gateway. The terminal device controls the actuator by receiving a control signal according to a control algorithm of the server or by manual operation. Therefore, the gateway system connects Wi-SUN, a wireless smart utility network, and the Internet, serves as a Wi-SUN coordinator, and is equipped with Modbus-TCP to interwork with SCADA.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.3
• /
• pp.635-642
• /
• 2012

In this paper, a real-time control system with Wi-Fi wireless communication was developed for dentistry Integrated Device. The control system is developed based on the Android platform using S3C6410 ARM core that is equipped with Wi-Fi communication, RS-485, Linux 2.6 and Android 2.0. The control system controls a water purifier, compressor and suction in real-time. The experimental results that the control system was controlled by each control modules connected with a water purifier, compressor and suction. The status values are displayed in real-time using RS485.

• Proceedings of the KIEE Conference
• /
• 2002.07a
• /
• pp.247-249
• /
• 2002

본 PowerMeter-Modem은 시스템 서버의 전단 통신 장치부의 무선모뎀과 IS-95B 망을 통해 서킷 접속을 하며 검침수행 관련정보를 수신하여 전자식 전력량계와 RS232 시리얼통신을 이용하여 전자식 전력량계의 전력량의 데이터를 취득 후 가공하여 서킷 방식이나 TCP/IP 프로토콜을 이용 패킷형태로 검침데이타를 IS-95B 망과 시스템간 프로토콜 변환장치를 거쳐 전단 통신 처리장치로 송출하는 역할을 한다.