• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.505-509
• /
• 2006

Recently, wireless Internet service has become generalized, and required the user authentication of a mobile hosts and QoS. However, time required for user authentication during handoff Processes between a wireless LAN system and mobile hosts is long, and is unsuitable for real-time communication and multimedia applications. In this paper. we improved the existing system in order to reduce a lead time of user authentication as they extended a Fast Inter-AP handoff. We use a Mechanism to assume a confidence degree with bases by the time that stayed at individual wireless LAN systems in order to reduce the handoffs. The experiment network shows that it decreases communication load, and improves communication QoS.

• Proceedings of the Korean Association for Survey Research Conference
• /
• 2002.11a
• /
• pp.215-224
• /
• 2002

조사의 범위는 사회과학에서 생명공학, 의학에 이르기까지 확대되었고, 조사 방법 또한 인터넷, 무선통신을 이용할 만큼 다양해졌다. 이와 같은 조사범위와 조사방법의 다양성은 조사의 신뢰성과 타당성을 향상시키기 위한 많은 연구를 동반하였다. 본 논문에서는 실제 조사 결과를 바탕으로 조사가 응답자에게 영향을 미치는 요인을 설문지 구성, 조사원의 태도, 시간대별 차이, 응답자의 감정상태에 따라 알아보고, 올바르지 못한 조사 설계로 인하여 가장 흔히 발생될 수 있는 비표본오차의 문제점에 대해서 살펴보고자 한다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.1
• /
• pp.97-108
• /
• 2013

Recently, mobile devices were increased and there was a sharp rise in demand. To exploit the location information of each device, many researcher was studying locating systems. The favorite locating or positioning systems were a GPS using satellites and a RTLS using wireless communication between devices. If some obstacle existed nearby the target device, The system have difference of performance. The obstacles near targets were caused signal disconnection and reflection because of NLOS condition. As the result, the NLOS condition degrade the locating performance. In this paper, we propose a locating system which is cooperated two systems using information reliability estimates from LOS/NLOS condition. We developed proposed system. In addition, we performed fields test and simulation tests at various environment for performance evaluation. As the result, the test showed 97% success rate to estimate NLOS condition. Furthermore, the simulation result of our locating system was increased to 89% compared with a single system.

• Journal of KIISE:Information Networking
• /
• v.27 no.2
• /
• pp.160-174
• /
• 2000

Nowadays, most widely used transport protocol, TCP is tuned to perform well in traditional networks where packet losses occur mostly because of congestion. TCP performs reliable end-to-end packet transmission under the assumption of low packet error rate. However, networks with wireless links suffer from significant losses due to high error rate and handoffs. TCP responds to all losses by invoking congestion control and avoidance algorithms, resulting in inefficient use of network bandwidth and degraded end-to-end performance in that system. To solve this problem, several methods have been proposed. In this paper, we analyse and compare these methods and propose appropriate model for improving TCP performance in the network with wireless links. This model uses TCP selective acknowledgement (SACK) option between TCP ends, and also uses caching method at the base station. Our simulation results show that using TCP SACK option with base station caching significantly reduces unnecessary duplicate retransmissions and recover packet losses effectively.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.5 no.5
• /
• pp.428-434
• /
• 2010

In this paper, we propose intelligent SAN(Ship Area Network) which is reliable transmission by integration of optical network of wire communication and Zigbee of wireless communication. We also implement module for remote control and constitute, managing for a various sensors and a controllers which are connected SAN integration network It will be help to prevent accident of ship to monitor work environment, real time monitoring of a equipment and main compartment of a poor ship inside. And it will be also available to enhance labor reduction, sailing safety and sailing economical efficiency of ship inside.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.26 no.4
• /
• pp.267-272
• /
• 2016

Wireless sensor networks (WSNs) are vulnerable to external intrusions due to the wireless communication characteristics and limited hardware resources. Thus, the attacker can cause sinkhole attack while intruding the network. INSENS is proposed for preventing the sinkhole attack. INSENS uses the three symmetric keys in order to prevent such sinkhole attacks. However, the sinkhole attack occurs again, even in the presence of INSENS, through the compromised node because INSENS does not consider the node being compromised. In this paper, we propose a method to counter the sinkhole attack by considering the compromised node, based on the neighboring nodes' information. The goals of the proposed method are i) network reliability improvement and ii) energy conservation through effective prevention of the sinkhole attack by detecting compromised nodes. The experimental results demonstrate that the proposed method can save up to, on average, 19.90% of energy while increasing up to, on average, 71.50%, the report reliability against internal sinkhole attacks in comparison to INSENS.

• Proceedings of the Korean Information Science Society Conference
• /
• 2005.07a
• /
• pp.265-267
• /
• 2005

RFID 시스템에서 소형화 추세 및 배터리 사용에 따라 태그 및 리더의 전송 전력을 최소화할 수 있는 저전력 설계가 반드시 필요하다. 또한 리더와 Tag는 무선으로 통신을 수행하며, 동시에 Tag는 이동성을 가지므로 에러율이 유선방식에 비해 상당히 높다. 그러나 현재 ISO표준에서는 에러발생시 MAC계층에서 단지 CRC체크 후 재전송을 하는 방식으로 에너지 효율성 및 전송효율이 떨어진다. 본 논문에서는 이 같은 문제를 해결하기 위해서 유통 물류 등에 사용되는 900MHz대역의 RFID시스템에서 에너지 소모 최소화와 신뢰성을 보장할 수 있는 방법으로 Hybrid ARQ를 제안한다. 기존의 Hybrid ARQ를 개선시켜 에너지 효율성을 고려한 최적패킷 길이를 사용하고, 에너지 소모가 적은 BCH Code를 채택한다. 성능 분석 및 시뮬레이션 결과, 제안하는 Hybrid ARQ 방식이 기존의 전송방식보다 에너지 효율성 및 신뢰성을 향상시킴을 보여준다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.10a
• /
• pp.552-555
• /
• 2010

In this paper, we propose a context-aware system using wireless multi sensor module to monitor the state for industrial factory environment. Wireless multi sensor module combines sensing values which are collected from each acceleration, pressure, temperature and gas sensors. Moreover, it delivers this data to server after being encoded by RS code. Thereafter, RS decoder decodes the values that are received from wireless multi sensor module and fixes errors which occur in wireless communication. Based on decoded data, context-aware algorithm sets critical range and compares it to the sensing values, if the sensing values are out of the range, an event occurs by the algorithm. At the same time, if there is another sensing value which is out of the range for standby time T seconds, the algorithm orders 3 steps-alarm to occur depending on each situation. Through this system, it becomes eventually possible to monitor machines' condition effectively. From the simulation, we confirm that this system is efficient to status monitoring of industrial automation equipment.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.1018-1021
• /
• 2009

Wireless Sensor Network collects a data from the specific area and the control is composed of small sensor nodes. Like this sensors to after that is established at the beginning are operated with the battery, the operational duration until several years must be continued from several months and will be able to apply the resources which is restricted in efficiently there must be. In this paper RHC (rounting history cache) applies in Directed Diffusion which apply a data central concept a reliability and an efficiency in data transfer course set. RHC algorithms which proposes each sensor node updated RHC of oneself with periodic and because storing the optimization course the course and, every event occurrence hour they reset the energy is wasted the fact that a reliability with minimization of duplication message improved.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.1
• /
• pp.99-106
• /
• 2017

In the WSN environment, the sensor node is selected as the cluster header and consumes a lot of energy. Therefore, we proposed a method to automatically select a cluster algorithm using the sensor field environment that can improve the reliability of the whole network by applying an energy efficient clustering algorithm based on already deployed sensor field. Experimental results show that FDN is extended about 3 times by using the proposed algorithm. In addition, the network energy is extended by up to 30% compared to the conventional method, thereby improving the reliability of the sensor network.