• Journal of Advanced Navigation Technology
• /
• v.19 no.2
• /
• pp.168-174
• /
• 2015

Wireless communication system for firefighters has an important role as the last communication method between the commander and the firefighters in disaster sites like fire. But the operation of Gyeongnam wireless communication system is installed, and maintained and controlled without criteria for the selection of a transmitting station and the analysis of propagation environment because of the lack of budget and the absence of professional personnel. To improve the performance of the radio station, this paper theoretically calculated free space loss of UHF 400 MHz band used by all firefighters in Gyeongnam and diffractions caused by single and multiple obstacles and computed the error after comparing the results of the actual measurement to those of simulation with FRAS operated by KFL. In the results, Deygout model was the most consistent with the actual measurement for 400MHz band in Kimhae site.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.06a
• /
• pp.379-382
• /
• 2007

In ubiquitous sensor networks(USNs), various sensing devices deployed in wireless sensor networks collect meaningful data from physical environments and the data are delivered to neighbor node through radio interfaces for further processing. In this processing, efficiently using of the limited source of low power and low cost is USNs on the point of energy consumption. In this paper, we measure and analyze the power consumption of LR-WPAN.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2002.04b
• /
• pp.1273-1276
• /
• 2002

기존 RTK-GPS는 고가의 장비인 RF방식의 무선모뎀을 사용함으로써 무선국의 허가, 전파의 지리적 장애물에 의한 영향, 전송거리의 제한, 주파수 혼신, 주파수 자원의 유한성 등의 문제점이 있다. 본 논문에서는 이러한 문제점을 해결하기 위해 휴대전화를 전송 매체로 이용하여 보정 데이터를 송 수신하는 방법으로, PDA 환경하에서 RTK-GPS 보정 데이터를 전송하는 시스템을 설계 및 구현하였다. 기준국의 서버는 GPS 수신기와 연결된 RS-232 시리얼 포트로부터 보정 데이터를 수신하여 휴대전화와 연동을 통한 이동국의 PDA 단말기로 보정 데이터를 전송하고, RS-232 시리얼 포트를 통해 이동국의 GPS수신기에 전달한다. 이동국의 측위프로그램은 GPS수신기로부터 RSC-232 시리얼 포트를 통한 위치 정보를 수신하여 상대측위를 하게되며, 정확한 위치 측정이 이루어진다.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.49 no.6
• /
• pp.77-82
• /
• 2012

In this paper, the new location management scheme based on region and movement threshold has been proposed in order to minimize the required cost to handle the resource location management signaling traffics under the wire/wireless convergent networks when the users are moving around the cold and hot regions. In this scheme, the sequential paging is supposed to be performed according to the movement threshold which can be changed in accordance with the number of movements that each mobile user had made while it is moving around the resource regions. With the proposed scheme, the cost of managing the location management traffics and efficient spectrum assignment overhead can be minimized by placing signaling traffics for location managements and also allocating radio spectrum considering individual movement behaviors.

• Journal of the HCI Society of Korea
• /
• v.3 no.1
• /
• pp.1-7
• /
• 2008

Recently researchers have studied mobile physiological sensing device. However, previous works focused on multiple and real time physiological sensing method, instead of aesthetic shape of sensing devices, sensing comfort during monitoring and sensing reliability against the hand motion artifact. In this work, we propose a stone shaped physiological sensing device to monitor the physiological status in a daily life which maximize the aesthetic feeling and sensing comfort and sensing reliability. We proposed stepwise user centered design process for user centric physiological sensing device and evaluated appropriate sensing positions against the hand motion artifacts and pressure from sensors. From the usability test and experiments, we verified the proposed sensing device provides the aesthetic appeals, sensing comfort and sensing reliability. We expect that this work can be applied in the various health care applications in near future.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.9
• /
• pp.1941-1946
• /
• 2009

Wireless sensor networks do the monitoring and collecting information in the environment instead of human. Sensor networks are consisted of small sensor nodes with very limited hardware resource and very low network bandwidth. The wireless communication environment causes lots of communication errors so that the sensor network requires error correction technique to increase the reliability of network. The performance of error correction technique could be increased by the researches about the error pattern of CRC. In the paper, we did the performance evaluation - transmission interval, distance between sensor nodes, racket size, and RF power - that affects to the success ratio of data transmission in the indoor environment. we propose the performance metrics of system configuration based on the analysis of performance evaluation.

• Journal of Advanced Navigation Technology
• /
• v.15 no.3
• /
• pp.355-363
• /
• 2011

Transcoding in the wireless mobile network is an important mechanism that reduces the delay time and improves the stream processing capacity. Wireless mobile streaming media services, however, have such problems as congestion, interference and delay due to narrow network bandwidth and limited resources. These problems degrade not only Quality of Service (QoS) but also responsiveness of the streaming media service. To solve this problem, this paper proposes a object version transcoding method. The proposed method analyzes the object versions to construct the transcoding graph. This paper utilizes a reference rate-based control function for an efficient streaming, and measures MVDS(Multiple Version Delay Saving) for an efficient delay savings. The simulation results show that the proposed mechanism achieves improved performance in delay rate and cache hit rate compared with those of other existing methods.

• Journal of Digital Contents Society
• /
• v.13 no.3
• /
• pp.353-358
• /
• 2012

Wireless sensor networks consist of resource constraint devices which typically send data measured by sensors attached to the end devices towards a coordinator. The most often used medium access control protocol used in wireless sensor networks is the standard IEEE 802.15.4, where it is wireless standard introduced for low power, low cost wireless communication with moderate data rates. In this paper, we present implementation of both the IEEE 802.15.4 protocol stack and UART interface on the TI CC2530. We show that data via UART of our implemented IEEE 802.15.4 board are transmitted correctly in terms of captured frames.

• Journal of the Korea Society of Computer and Information
• /
• v.13 no.5
• /
• pp.195-202
• /
• 2008

In this paper, To improve the effectiveness of security enforcement, the first contribution in this work is that we present a clustered heterogeneous WSN(Wareless Sensor Network) architecture, composed of not only resource constrained sensor nodes, but also a number of more powerful high-end devices acting as cluster heads. Compared to sensor nodes, a high-end cluster head has higher computation capability, larger storage, longer power supply, and longer radio transmission range, and it thus does not suffer from the resource scarceness problem as much as a sensor node does. A distinct feature of our heterogeneous architecture is that cluster heads are equipped with TC(trusted computing) technology, and in particular a TCG(Trusted Computing Group) compliant TPM (Trusted Platform Module) is embedded into each cluster head. According the TCG specifications, TPM is a tamper-resistant, self-contained secure coprocessor, capable of performing cryptographic functions. A TPM attached to a host establishes a trusted computing platform that provides sealed storage, and measures and reports the integrity state of the platform.

• Geophysics and Geophysical Exploration
• /
• v.12 no.4
• /
• pp.355-360
• /
• 2009

This paper presents mobile robot based down-scale mineral resources exploration test system for the USN (Ubiquitous Sensor Network) based exploration. The system emulates the actual exploration environment. Underneath the metal free test plate, a metal object is attached. A magneto-meter mounted mobile robot runs around on the plate to find the metal. The measured magneto-meter values are transferred to the host PC via wireless network. The system enables to improve the reliability of simulation as well as to help efficient exploration system design. Metal-detecting experiments were carried out to illustrate the efficiency of the proposed system.