• Korean Journal of Agricultural and Forest Meteorology
• /
• v.20 no.4
• /
• pp.357-365
• /
• 2018

This study was carried out to evaluate the weight loss rates, carbon and nitrogen dynamics of wood stakes following soil amendment treatments (CLB: compound fertilizer + lime + biochar; LB: lime + biochar) in a post-fire restoration area, Ulsan Metropolitan city, southern Korea. Soil amendments in the fire-disturbed area were applied to two-times (Mar. and Jun. 2015, 2016) during the study period. Wood stakes on Mar. 2015 were buried at a top 15cm of mineral soil in two soil amendment and control treatments of Liriodendron tulipifera, Prunus yedoensis, Quercus acutissima, Pinus thunbergii plantations and an unplanted area in the post-fire restoration area. Wood stakes were collected at Oct. 2015, Mar. 2016 and Oct. 2016 to measure weight loss rates, organic carbon and nitrogen concentrations. Weight loss rates of wood stakes were not significantly affected by soil amendment treatments. However, remaining carbon of wood stakes were lowest in the control treatment (43.7%), followed by the CLB (71.3%) and the LB (71.6%) treatments. Remaining nitrogen of wood stakes was less in the control treatment (29.7%) compared with the LB treatment (52.6%). The results indicate that carbon and nitrogen mineralization of wood stakes in post-fire restoration area were delayed by soil amendment treatments.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.21 no.6
• /
• pp.15-25
• /
• 2018

This study was conducted to obtain proper amount of solid poultry manure in the beginning phase of Deutzia crenata growth. Seedling growth increment, dry weight, inorganic matter uptake and chemical changes of soil according to the concentration of solid poultry manure fertilization. 1. When treated with solid poultry manure, seed germination rate was highest on the control. However, germination rates tended to decrease when treated with at high concentrations. 2. The growth of seedlings treated with poultry manure was always higher than that in control. At the 1.0% of poultry manure treatment, the growth rate and dry weight of the seedlings was highest. 3. The amount of inorganic nutrients absorbed by the seedling was generally high with the 1.0% treatment, declined sharply with the 2.0% treatment. 4. For the planting soil of Deutzia crenata, the higher the concentration of poultry manure, the lower the soil pH. However, nitrogen, available P, K, Na and Mg contents in the soil have increased with higher concentrations.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.1
• /
• pp.25-30
• /
• 2013

The piezoelectric-based hydraulic actuator is a hybrid device consisting of a hydraulic pump driven by piezoelectric stacks that is coupled to a conventional hydraulic cylinder via a set of fast-acting valves. Nowadays, such hybrid actuators are being researched and developed actively in many developed countries by requirement of high performance and compact flight system. In this research, operation principle and performance testing of the hybrid actuator were introduced. Output velocities have been measured in both loaded case and not loaded case and the blocking force also has been measured in external loaded case. The maximum velocity of the actuator is 53.3 mm/s, blocking force is 240.7 N and corresponding power output is 3.2 W.

• Korean Chemical Engineering Research
• /
• v.50 no.4
• /
• pp.621-626
• /
• 2012

In this study, the composite coating materials with improved thermal insulation property were prepared by incorporating the hollow micro-spheres with high heat transfer resistance. The UV curable resin system consisting of hexa aliphatic urethane acrylate (UP118), trimethylolpropane triacrylate (TMPTA), 1,6-hexanediol diacrylate (HDDA), and photoinitiator (Irgacure184) was employed as an organic binder. The glass substrates were coated by the prepared composites via bar coating method and cured under UV radiation. The optical transparency, thermal insulation property, adhesion, and surface hardness of the glass coated with composites containing different type of micro-spheres were investigated. The incorporation of micro-spheres with only 20 vol% of content resulted in remarkable improvement in the thermal insulation property of the coated glass. In addition, the transparent coated glass with light transmittance of about 80% could be obtained when silica micro-sphere (SP) was used as a thermal barrier.

• Korean Journal of Soil Science and Fertilizer
• /
• v.18 no.1
• /
• pp.89-93
• /
• 1985

In order to develop the nutrient material for growing plants, tobacco leaf debris (T.L.D) that is a residual product of cigarette processing was carbonated at about 50% of its weight and neutralized its alkalinity by nitric and phosphoric acid. This material ($T.L.D+3N-HNO_3+1N-H_3PO_4$ (10:1:1), as a consequence, contained 4.1% of nitrogen, 2.1% of phosphte, and 6.6% of potassium in value of about pH 7. It was very effective on seedling growth to apply 1 Kg of nutrient material per 110 1 of bed soil as basic dressing because of containing not only quick-acting nitrate but also slow-releasing organo-nitrogen and sufficient potassium.

• Journal of Adhesion and Interface
• /
• v.16 no.3
• /
• pp.116-121
• /
• 2015

In this study, octadecyltrichlorosilane (OTS) has been used to replace fluoro-silanes which are much more expensive than OTS. In order to improve the mechanical and adhesive properties of coating layers, inorganic binders were separately synthesized based on sol-gel reaction in acidic condition. Since the synthesized silica nanoparticles gave only nano-scaled roughness, superhydrophobicity is not well obtained. Here, we present a new simple approach by intentionally inducing particle aggregation in the solution which is controlled by adjusting solvent amount. With selecting suitable sizes of silica nanoparticles, superhydrophobic surfaces were obtained with increasing the amount of organic solvents after surface hydrophobization using OTS, and an extremely water-repellent behavior was observed with zero sliding angle. This superhydrophobicity was achived only for the dielectric constant lower than 25, regardless of the composition of solvent, meaning that the dielectric constant could be an excellent indicator for fabricating superhydrobic surfaces induced by particle aggregation in the solution.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.5 no.4
• /
• pp.122-128
• /
• 2010

On the international provision on prohibition of ocean dumping of waste, tap water sludge has been buried or recycled on th low value added product as landfill. Due to the tap water sludge having high inorganic content, differing from the sewage sludge, it is possible to use as a usable resource by suitable process. We have studied on hydro thermal processing of tap water sludge with phosphoric acid and finally synthesize a artificial zeolite having a deodorization property. To use it as a building material, it has to be solidification. This study is on the properties of artificial zeolite synthsized and solidification properties by various types of solidifier. It is showed that the slaked lime is the best on setting property and its optimum content is 30-60 weight proportion. Solid by solidified by slaked lime has low strength and excellent deodorization performance, so it is possible to use as a functional pannel as gypsum board.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.35 no.5
• /
• pp.511-515
• /
• 2006

The chemical composition and antioxidative activities of Platycodon grandiflorum leaves and stems was investigated in order to evaluate the potential as functional food material. The moisture contents of leaves and stems were 84.31% and 75.91%, respectively. The Ca content was the highest in leaves (351.49 mg%) and stems (217.56 mg%). The major free sugar of leaves was glucose (1,729.87 mg%) However major free sugar of stems was fructose (734.91 mg%). Glutamic acid (242.91 mg%) and arginine (228.60 mg%) in leaves were major amino acids, lysine (110.08 mg%) and glutamic acid (80.40 mg%) in stems were major amino acids. Oleic acid and linoleic acid were major fatty acids in crude fat of both leaves and stems. DPPH free radical scavenging activities of fractions from leaves and stems were rising with increasing amount of fractions. Like antioxidant activity, the reducing power of fractions from leaves and stems was also dependent on concentration while butanol fraction of stems showed the highest reducing power.

• Journal of the Korean Electrochemical Society
• /
• v.3 no.1
• /
• pp.11-14
• /
• 2000

Transparent conducting ITO thin films have been studied and developed for the solar cell substrate or LCD substrate. ITO thin film has been mostly fabricated by high cost sputtering method. In this research, sol-gel method is applied to fabricate ITO thin film at lower cost. The research is focused on the establishment of process condition and development of precursor. Organic sol was made of indium tri-isopropoxide dissolved in ethylene glycol monoethyl ether. The hydrolysis was controled by addition of acetyl acetone. Tin(IV) chloride was added as dopant. Inorganic sol was made of indium acetate dissolve din normal propanol. Spin coating technique was applied to coat ITO on borosilicate glass. The resistivity of ITO thin film was approximately $0.01\Omega{\cdot}cm$ and the transmittance is higher than $90\%$ in a visible range.

• Applied Chemistry for Engineering
• /
• v.16 no.1
• /
• pp.112-116
• /
• 2005

We investigated the surface modification method for the preparation of organic-inorganic hybrid composite thin film. Gelatin obtained from the decomposition of collagen was allowed to adsorb in a polystyrene tissue culture dish for 2 h to from layers of gelatin. Supersaturated ionic solution of calcium and phosphorus was injected on the gelatin adsorbed layer to form calcium phosphate thin film. During the initial period of incubation, nucleates were formed. With increase of the incubation time, CaP (calcium phosphate) thin film grew on the surface of the culture dish. The gelatin/CaP thin film displayed the highly porous three-dimensional surface structure. Attenuated, total reflectance Fourier transform, infra-red spectroscopy (ATR-FTIR) was used to analyze the chemical properties of CaP film. The analysis demonstrated that the CaP film formed at initial period of treatment appeared to be amorphous. With increase of incubation time, the crystallinity of the film was slightly increased, but the presence of the peaks for the low crystalline CaP confirmed that the CaP thin film prepared in this study was poorly crystallized.