• Asian Journal of Turfgrass Science
• /
• v.18 no.3
• /
• pp.149-163
• /
• 2004

Physical and chemical properties of root zone mixes and methods of green construction are important considerations for improving turf grass quality for putting greens. This study compared Penncross creeping bentgrass (Agrostis palustris Huds.) performance as affected by three root zone construction systems with three amendments (sand, peat, and zeolite). The objective of this study was to determine if an amended California construction system would improve green performance during establishment (1998-1999) and maturation (2000-2001). Three treatments were tested: California ($100\%$ sand), USGA($90\%$ sand and $10\%$ peat, v/v), and California-Z ($85\%$ sand and $15\%$ zeolite, v/v). Treatments were arranged in a randomized complete block with four replicates. Physical and chemical properties of the root zone and bentgrass performance were compared for the treatments. The California-Z treatment had the highest saturated hydraulic conductivity, field infiltration rate and the lowest bulk density. It also had the highest cation exchange capacity and plant available nutrient concentrations among the three treatments. The California-Z treatment produced bentgrass quality and color during green establishment and maturation that were equal to or higher than the California treatment, and consistently higher than the USGA treatment. The addition of an inorganic amendment to the California system improved physical and chemical properties of the root zone and improved quality and color of bentgrass during green establishment. During green maturation, creeping bentgrass in the California-Z treatment was equal (6 of 15 sampling dates) or $20\%$ higher (9 of 15 dates) in quality compared to the California system.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2000.11a
• /
• pp.132-132
• /
• 2000

환경오염과 이상기후의 영향으로 인한 수자원의 고갈과 함께 국내의 경우 수자원 개발 계획 및 수요량을 감안할 때 향후 7 년 내에 물부족 현상을 겪을 것이라는 보고가 있 었으며, 환경부담을 줄이기 위해 폐수의 배출기준은 강화되고 있다. 이러한 상황에서 제조 특성상 타 업종에 비해 폐수 발생량이 높은 편인 국내의 제지산업은 여러 해전부터 이에 대 한 방안을 모색하여 왔다. 일반적으로 폐수 수질 관리와 청수 사용량의 절감을 위해 고가의 폐수 처리 장치를 설치하거나 폐수 재활용을 통해 공정을 극도로 폐쇄화하는 방안으로 연구 가 진행되어 왔다. 이 중 용수의 재활용이 가장 경제적인 방법이지만, 재활용이 지속될수록 각종 무기염과 콜로이드성 유기물질이 축적되어 각종 약품의 효능 저하, 탈수속도의 저하 및 생산 제품의 품질 악화 등의 문제를 유발한다고 알려져 있다. 이를 해결하고자 하는 노 력으로 펄프 원료에 따른 공정수 내 용해성 물질의 분석과 재활용 횟수에 따른 각종 SS와 D DS의 축적 정도에 대한 기초 연구가 수행되었으며, 고폐쇄화된 공정에서 성능을 발휘할 수 있는 첨가제의 개발과 적용 방법에 대한 연구도 수행된 바 있다.여러 지종 가운데 골판지 원지는 용수의 재활용률이 상당히 높은 지종이기 때문에 공정수의 재활용이 진행될수록 열악한 저급 원료로부터 각종의 다양한 물질이 용출 혹은 배 출되며, 이러한‘물질은 골판지 원지의 강도 발현에 더욱 악영향을 미칠 것으로 판단되었다. 미세분으로 구성된 SS의 경우 이미 많은 연구를 통해 특성이 파악되었기 때문에 본 연구에 서는 ss를 제외한 공정수를 두 가지로 크게 나누어 고려하였다. 즉, ss로 측정되지 않지만 닥도를 유발할 수 있는 미세 무기물질과, 용해성의 무기염, 첨가제 및 추출물 둥으로 이루어 진 용해성 성분으로 나누어 분석하였으며, 또한 각각이 초지 특성에 미치는 영향을 살펴보 고자 하였다.을 해석코자 하였으며, 그 방법으 로 수치해석기법을 도입하였다. 또 실제 캘린더링 전후의 두께 변화를 측정하여 유리전이온도 의 도달 깊이와 비교하였다. 지필의 압축 정도는 롤의 직경과 닙 폭을 이용하여 MD 방향으 로 함수화하였으며, 열전달 계수로는 겉보기 값을 사용하였다. 이때 지펼은 균질한 것으로 가 정하였다. 함수율은 유리전이온도를 좌우하는 가장 큰 인자이나 본 연구에서는 항온항습처리 를 통해 유입지의 함수율을 고정시켰으며 캘린더링 시 함수율의 변이는 없다고 가정하였다. 그 결과 열침투깊이가 증가할수록 지필은 보다 변형되기 쉬운 상태가 되어 주어진 압력 조건에 대해 소성변형 정도가 증가하는 것으로 나타났다. 이는 캘린더링 전후에 두께 변화를 측정하여 정량적으로 평가할 수 있었다. 수치해석기법을 통해 같은 압력 조건에서 온도가 증 가함에 따라 혹은 같은 온도 조건에서 압력이 증가함에 따라 지필 내의 유리전이온도의 침투 깊이가 증가함을 알 수 있었으며 이는 캘린더링 전후의 두께 변화의 측정 결과와 일치하였 다. 또 NRT가 증가함에 따라서도 유리전이온도 침투 깊이가 증가하였다.합편에 비해 일부 우수한 양상을 보였지만 본 실험의 범위내에서는 통계적 정량적 차이를 제시할 수는 없었다. 향후 보다 광범위한 동물 실험이 필요할 것으로 사료된다.된다.하고도 완전교정술 도달 확률이 높은 치료전략이라는 사실을 입증하였으며 주대동맥폐동맥혈관부행지의 크기나 숫자가 단일화하기 쉬운 형태학적 특징을 지닌 경우에는 조기에 일단계완전교정술을 시행하여 양호한 결과를 얻을 수 있다는 사실을 발견하였다. 반면 본 환아군 중 단일화술을 먼저 시도한 군에서는 비록 단계적인 단일화를 시도한 군에서 단일화술과 관계된 수술사망율이 약간 낮기는 하였으나 완전교정술까지 완료될 가능성에는 차이가 없었다. 그러나 이 경우 보다 정련된 적응 환자의 선택을 통한 단일화 우선전략의 시도와 장기 추

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.2
• /
• pp.1204-1210
• /
• 2014

New control methods are proposed for indoor air quality by removing fine airborne dust-particles. As suspended fine dust-particles contain inorganic dust as well as fine organic bacteria, studies for simultaneous control of these contaminants are required. In this study, photocatalytic disinfection of indoor suspended microorganisms such as E. coli and Bacillus subtilis is performed by three types of photocatalysts with UVA irradiation. The UVA irradiation strength was controlled to the minimum $3{\mu}W/cm^2$, and ZnO, $TiO_2$, and ZnO/Laponite ball were used as the catalysts. The results indicate that E. coli was removed over 80 % after about 2 hours of reaction with UVA and all three types of photocatalysts, whereas only with UVA, around 50 % E. coli removal was obtained. Among the catalysts, ZnO/Laponite composite ball was found to have similar sterilizing capacity to $TiO_2$. However, in case of B. subtilis, which has thick cell wall in its spore state, disinfection was not effective under the low UVA irradiation condition, even with the catalysts. Further studies need to figure out the optimal UVA irradiation ranges as well as photocatalysts doses to control airborne dust, to provide healthy clean air environment.

• Korean Chemical Engineering Research
• /
• v.40 no.6
• /
• pp.735-740
• /
• 2002

In order to improve the anti-fogging property of polymer films, organic-inorganic hybrid coating solutions which have good hydrophilic property and transmission in the range of visible light were synthesized by the sol-gel method. The coating solutions were prepared by adding glycidoxypropyl trimethoxysilane(GPS) to a colloidal silica(15 nm) suspension(Ludox). GPS as silane coupling agent forms strong bonds to the colloidal silica and surrounding polymer matrix and links two different materials together. Solutions prepared by addition of GPS at the acidic condition resulted in coatings that were less prone to cracking, while those at the basic condition caused coatings with more cracking. These resulted in better hydrophilic property and transmission in the range of visible light for the solution prepared at the acidic condition(pH 2). Compared with coatings under acidic conditions, coatings prepared at basic conditions showed worse hydrophilic property and transmission in the range of visible light.

• Horticultural Science & Technology
• /
• v.16 no.2
• /
• pp.233-235
• /
• 1998

Energized-functional water (EFW) and powder (EFP) were manufactured by Kyungwon Institute of Life Science, Seoul, through a series of processes; tap water ultra-purification energy imprinting with catalysts in platinum columns mixing energy-imprinted water + activated zeolites + photosynthetic bacteria fermenting at $25^{\circ}C$ filtering EFW and/or EFP. A single application of EFP to soil under tree canopy before bud burst, combined with three EFW applications to soil during growth of 'Fuji' apples (Malus domestica Borkh.) resulted in a higher Ca concentrations in fruit skins and flesh, and lower Ca and N concentrations in leaves and shoot-bark tissues. EFW also stimulated the net photosynthesis of leaves and root activity. Soluble solid concentrations (SSC) and anthocyanin levels of fruits were also significantly increased at harvest, producing greater firmness and less core browning during storage at $0^{\circ}C$. However, there was no significant difference in titratable acidity of fruit juice between the EFW treatment and the controls.

• Korean Journal of Food Science and Technology
• /
• v.11 no.1
• /
• pp.1-7
• /
• 1979

This experiment was carried out to investigate the nutritive value of brewery's activated sludge on the performance and nutrients utilization of egg type chicken of babcock fed the different levels of sludge. The chemical composition, content of amino acids and mineral in brewery's activated sludge were also analyzed. 3,6,9 and 12% of brewery's activated sludge were supplemented with basal ration as a substituted ingredient to soybean oil meal in experimental ration. The results obtained were as follow: 1. Chemical composition analysis 1) Brewery's activated sludge had 42.50% of crude protein on the air dried basis, and had 15,69% of crude ash, and had 2,060 kcal of metabolizable energy per kg of sludge. 2) Total amino acid content of brewery's activated sludge was 42.50% and 99% crude protein of brewery's activated sludge was a true amino acid, and brewery's activated sludge contained especially more methionine and threonine that those of soybean oil meal. 3) In case of mineral content of brewery's activated sludge, phosphorus, magnesium, copper and iron were plentifully included. However, calcium content in brewery's activated sludge was very low. 2. Feeding trial 1) Body gain of chicken fed the different levels of sludge was decreased in proportion to increasing level of sludge was decreased in proportion to increasing level of sludge. However, no statistical differences were found out between treatments. 2) Diet intake of chicken fed the different levels of sludge was significantly (p<0.05) increased as the supplementation level of sludge in ration increased. 3) Feed conversion of chicken fed the different levels of sludge was high in proportion to increasing level of sludge in ration. However, there were no significant differences between treatments. 3. Digestion trial 1) Utilization of dry matter of chicken fed the different levels of sludge was decreased as the level of sludge in ration increased. However, no statistical differences were found out between treatments. 2) Utilization of crude protein of chicken fed the different levels of sludge was significantly (p<0.01) increased as the level of sludge was higher. Utilization of crude protein of control treatment and of sludge 3% treatment was higher than that of other treatments. 3) Utilization of crude ash of chicken fed the different levels of sludge was significantly (p<0.05) decreased in proportion to increasing level of sludge in ration. 4) Utilization of NFE of chicken fed the different levels of sludge was slightly decreased in proportion to increasing level of sludge in ration. However, no statistical differences were found out between treatments. Therefore according to this experiment, it may be concluded that brewery's activated sludge can be supplemented with chicken ration by $6{\sim}9%$.

• Journal of Animal Science and Technology
• /
• v.49 no.5
• /
• pp.611-620
• /
• 2007

The current study was designed to define whether a blend of prunus mume extract(25%) containing lactic acid(75%) and grape seed extract(10ppm) could affect in vitro antimicrobial activity and growth performance, intestinal microflora, plasma biochemical profiles and digestive enzymes activities in broiler chickens. In paper disc agar diffusion test, we clearly observed antimicrobial activity against E. coli in response to prunus mume extract or a blend of prunus mume extract. For in vivo test, a total of ninety six 3-d-old male broiler chicks were assigned to basal diet(CON), basal diet supplemented with antibiotics (ANTI) and 0.5% a blend of prunus mume extract(PRNUS) until 35 days of age. Throughout the entire experimental period(3-35 days), there were no differences in BW and FCR between the birds fed the basal diet with antibiotics and the diet supplemented with a blend of prunus mume. However, ANTI group showed a significant increase in BW and total gain compared to CON group. The weights of digestive organs such as the pancreas and mucosal tissues were not affected by dietary treatments. There was no difference in plasma levels of glucose, cholesterol, AST and ALT activity. However, triglyceride in plasma increased(P<0.05) in the birds fed the diet supplemented with 0.5% a blend of prunus mume extract compared to those fed antibiotics supplemented diet. The activities of pancreatic trypsin and amylase, and intestinal hydrolase including disaccharidase were not affected by dietary treatment. The colony forming units(CFU) of lactobacillus in the lower ileal-cecum of the birds fed the diet supplemented with a blend of prunus mume extract was significantly(P<0.05) higher than that of birds fed antibiotic supplemented diet without affecting the CFU of E. coli. In conclusion, the birds fed the diet supplemented a blend of prunus mume as an alternative to antibiotics showed a similar growth performance and an significant increase in lactobacillus population compared with the birds fed basal and antibiotics supplemented diets.

• Resources Recycling
• /
• v.17 no.4
• /
• pp.3-9
• /
• 2008

The total amount of fluidized bed incinerator ash, i.e. incombustion materials generated from the municipal solid waste incineration(MSWI) in Korea was approximately 14,000 tons in 2006. Most of the ash after ferrous metal separation is finally discard to the landfill sites. In the present work, possibility for recycling of the ash is studied to utilize the ash as raw materials for ceramic products. Incombustion materials obtained from the two different incinerators were used to recover the raw materials by applying the magnetic separation and screening process to remove metallic particles. The raw materials show relatively low heavy metals content obtained from the KSLP leaching tests. The ceramic products were prepared by mixing the clay with the various amounts of the raw material. The physical properties, i.e. shrinkage rate, absorbancy and compressive strength of the ceramic products sintered at $1,000^{\circ}C$ and $1,050^{\circ}C$, respectively were improved by increasing the addition amounts of the incinerator ash. Based on the leaching tests the ceramic products also be satisfied with the standard limits on the leachability of heavy metals because most of the metallic materials are effectively removed from the incombustion materials by appling the separation processes.

• Membrane Journal
• /
• v.31 no.6
• /
• pp.443-455
• /
• 2021

In this study, polyphenylene sulfide (PPS) was used as a support and a separator was manufactured using polysulfone and inorganic additives to manufacture a separator with low membrane resistance for application of an alkali water electrolysis system, and then the effect on the thickness and porosity of the support was analyzed. The PPS felt used as a support was compressed with variables of temperature (100℃, 150℃, 200℃) and pressure (1 ton, 2 tons, 3 tons, 5 tons) to adjust the thickness. A porous separator could be manufactured by preparing a slurry with polysulfone using BaTiO₃ and ZrO₂ which have high hydrophilicity and excellent alkali resistance as inorganic particles and casting the slurry on a compressed PPS felt. Changes in morphology of the separator according to compression conditions were confirmed through an electron scanning microscope (SEM). After that, the porosity was calculated, and the thickness and porosity tended to decrease as the compression conditions increased. Various characteristics were evaluated to confirm whether it could be used as a separator for water electrolysis. As a result of measuring the mechanical strength, it was confirmed that the tensile strength gradually increased as the compression conditions (temperature and pressure) increased. Finally, it was confirmed that the porous separator manufactured through the alkali resistance test has excellent alkali resistance, and through the IV test, it was confirmed that the membranes compressed at 100℃ and 150℃ had a lower voltage and improved performance than the existing uncompressed membrane.

• Korean Journal of Food Science and Technology
• /
• v.36 no.6
• /
• pp.937-942
• /
• 2004

Physicochemical properties and mineral composition of seaweed salts prepared by incineration and osmotic dehydration methods were determined. As the incineration temperature increased, yield of seaweed salts, insoluble solids, pH, alkalinity, and oxidation-reduction potential (ORP) decreased. Alkalinity of salt prepared with sea tangle was higher than that of sea mustard. ORP decreased by incineration above $700^{\circ}C$, and was lower in salt with sea tangle. As incineration temperature increased, amounts of K and Ca in seaweed salt increased, whereas that of Mg decreased. Potassium and Ca contents of seaweed salt increased remarkably compared with those of common salt. Potassium content of sea tangle salt was higher than that of sea mustard. As incineration time increased, yield of seaweed salts, insoluble solid content, and pH decreased, whereas ORP of the salt increased. Potassium content of seaweed salt with incineration time, while Ca and Na contents decreased after incineration of 8 and 4 hr, respectively. Yield of seaweed salt by osmotic dehydration increased as immersion time in sea water increased. pH of salt from sea mustard was higher than that of sea tangle. ORP of seaweed salt dried three times was -128.8 mV, significantly lower than that of salt prepared by incineration method. As sea water immersion time increased, Mg content of seaweed salt increased significantly, while Ca content decreased. Potassium content of seaweed salt was higher in sea tangle salt. In case of salt prepared by incineration of residuals, pH increased with immersion time but ORP decreased.