• Title/Summary/Keyword: 무공해

Search Result 278, Processing Time 0.027 seconds

Effects of Heat Treatment on Choke Core Properties in $Fe_{78}Si_9B_{13}$ Amorphous Alloys ($Fe_{78}Si_9B_{13}$ 비정질 합금의 초크 코어 특성에 미치는 열처리 효과)

  • 노태환;장완희
    • Journal of the Korean Magnetics Society
    • /
    • v.10 no.5
    • /
    • pp.191-195
    • /
    • 2000
  • With the object of developing a non-gap choke core, effects of annealing in oxygen atmosphere on magnetic properties for Fe$_{78}$Si$_{9}$B$_{13}$ amorphous alloy were investigated. After annealing for 2 hrs at 440 $^{\circ}C$, optimum magnetic properties for choke core were obtained, where the effective permeability was 180 and was almost constant up to several MHz, and the decrease in permeability upon large DC bias current of 12 A or DC bias magnetic field of 8,000 A/m was very little. Moreover the AC magnetic loss was very low as compared to the conventional choke cores. Upon the optimum annealing, the magnetic hysteresis loop was inclined accompanying the increase of coercive force and the appearance of fine crystallites of $\alpha$-Fe phase. The good choke core properties was considered to be due to the suppression of domain boundary motion and domain refinement by the crystallites.

  • PDF

Study on mechanization of garlic cultivation (마늘재배 일관기계화 실용화 연구)

  • 이채식;정성근;조남홍;이영희;최덕규
    • Proceedings of the Korean Society for Agricultural Machinery Conference
    • /
    • 2002.02a
    • /
    • pp.42-47
    • /
    • 2002
  • 가. 작업별 시험결과 1) 마늘쪽 분리·선별작업 o 마늘쪽 분리기는 통마늘을 1 또는 2∼3쪽으로 분리하여 1차 선별하고, 마늘쪽 선별기는 분리된 마늘을 3단계로 선별되며 작업성능은 시간당 60접 이상을 분리 및 선별할 수 있다. o 개발된 마늘쪽 분리기와 선별기는 소형 경량이며 취급조작이 편리한 기종하고 작업성능이 높고 손상률이 적어 '01년도에 60대가 농가 보급되었으며 '02년도에는 확대 보급될 전망이다. 2) 파종작업 o 작업성능은 경운기용 파종기 2시간/10a, 승용관리기용 직립파종기는 1시간/10a으로 능률적이었으며 작업정도와 생육상태가 양호하였다. o 지역별 파종작업 체계 -난지형 마늘 파종은 직립파종을 하며 제주, 남해 등은 마늘을 파종한 후 10-11월 줄기가 자랐을 때 무공비닐을 피복하고 줄기를 유인하며, 무안은 유공비닐을 피복하고 구멍에 마늘의 1/2 또는 2/3만 묻히도록 파종하며 별도의 줄기유인 작업은 하지 않는다. 의성지역의 한지형 마늘은 트랙터로 쇄토정지후 보행관리기로 골을 내고 인력으로 마늘을 놓으면 관리기가 다음 골을 내면서 복토하는 체계이다. 3) 마늘 수확작업 -마늘 수확기는 난지형 마늘 수확에는 효과가 적으나, 한지형과 같이 깊게 파종하여 인력으로 뽑기 어려운 재배지역에서는 필요한 기종이며, 토양수분이 많으면 굴취된 마늘과 혼이 진동판에 걸려 작업상태가 불량하므로 마늘과 흙의 이송이 원활토록 진동판 형상 및 적정 진폭 구명이 요구됨 4) 마늘줄기 절단작업 -난지형 마늘은 포장에서 건조후 단기간(1-2주)내에 줄기절단을 해야하므로 기계환가 시급하나 한지형 마늘은 아직도 대부분 줄기를 자르지 않고 묶어서 판매하고 있어 기계화의 시급도는 떨어짐 5) 마늘 선별작업 -마늘선별기는 작업성능이 높고 5등급으로 균일 선별되었으며 손상도 없었으나, 기계가 크고 무거워 이동이 곤란하고 가격이 비싸므로 선별등급을 3∼4단계로 줄이고 소형 농가보급형으로 개량제작이 요구됨. 나. 마늘재배 일관기계화에 의한 노동투하시간과 비용 -종자준비부터 통마늘선별까지의 일관기계화로 투입된 주요작업의 노력은 75∼76%가 절감되고, 재배규모 3ha기준시 비용은 44-53%절감되었음.

  • PDF

Stability Investigation of a Foundation Located above Limestone Cavities Using Scaled Model Tests (석회암공동 상부 기초의 안정성 검토를 위한 모형실험 연구)

  • Kim, Jong-Woo;Heo, Seok
    • Tunnel and Underground Space
    • /
    • v.26 no.6
    • /
    • pp.493-507
    • /
    • 2016
  • Scaled model tests were performed to investigate the stability of a foundation located above limestone cavities. Cavity shape was assumed to be an ellipse having 1/3 for the ratio of minor to major axis lengths. 12 different test models which have various depths, locations, inclinations, sizes and numbers of cavity were experimented and they were classified into 5 different groups. Crack initiation pressure, maximum pressure, deformation behaviors, failure modes and subsidence profiles of test models were obtained, and then the influences of those parameters on the foundation stability were investigated. No cavity model showed a general shear failure, whereas the models including various cavities showed the complicated three different failure modes which were only punching failure, both punching and shear failures, and double shear failure. The stability of foundation was found to be decreased as the cavity was located at shallower depth, the size and number of cavity were increased. Differential settlements appeared when the cavity was located under the biased part of foundation. Furthermore, subsidence profiles were found to depend on the distribution of underground cavities.

Effect of Internal Electrode on the Microstructure of Multilayer PTC Thermistor (적층형 PTC 서미스터의 미세구조와 PTCR 물성에 미치는 내부전극재의 영향)

  • Myoung, Seong-Jae;Lee, Jung-Chul;Hur, Geun;Chun, Myoung-Pyo;Cho, Jeong-Ho;Kim, Byung-Ik
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 2007.11a
    • /
    • pp.181-181
    • /
    • 2007
  • PTCR 세라믹스를 적층형 부품으로 제조할 경우 소형화, 저 저항화 및 과전류 유입 시 빠른 응답특성을 갖는다는 장점을 가지고 있으며, 이러한 적층형 부품제조시에는 내부전극재가 부품소자의 물성에 중요한 영향을 미친다. 특히 우수한 옴성 접촉(Ohmic Contact)을 갖는 Zn, Fe, Sn, Ni 등의 적층 PTC용 전극재는 높은 산화특성으로 인해 재산화 과정에서의 비옴성 접촉(Non-ohmic contact)을 갖게 되어 PTC 특성을 저하시킬 우려가 있다. 따라서 본 연구에서는 적층형 PTCR 세라믹스의 내부전극재와 반도체 세라믹층의 동시소성거동 및 적층 PTCR 세라믹스의 전기적 특성을 평가하였다. 본 연구에 적용된 내부전극재로는 Ni 전극을 사용하였고, Ni 전극용 paste로는 무공제 paste, 반도체 세라믹공제 paste, $BaTiO_3$ 공제 paste의 3종 전극재가 이용되었다. 적층형 PTCR 세라믹스의 제조공정은 테이프 캐스팅(Tape casting), 내부전극인쇄, 적층 및 동시소성을 포함하는 적층화공정을 적용하였다. 각각의 전극 paste를 적용하여 제조된 chip은 미세구조관찰, I-V특성, R-T특성 등을 평가하여 내부전극내 세라믹공제의 영향을 고찰하였다.

  • PDF

A Study on Perception, Interest and Consumption to the Organic Food of Housewives (주부의 무공해식품에 대한 인식, 관심 및 소비에 관한 연구)

  • NamKung, Sok;Lee, Hye-Im;Lee, Jeong-Yun;Kim, Man-Soo
    • Journal of the Korean Society of Food Culture
    • /
    • v.9 no.3
    • /
    • pp.289-301
    • /
    • 1994
  • The purpose of this study was to investigate housewives' perception, interest and consumption of organic food, and to identify the variables influencing on them. The sample was selected from 411 housewives living in Seoul from 1st of September to 20th of September in 1993. Used statistical methods were frequency, percentage, mean, Cronbach's ${\alpha}$, factor analys, ANOVA, Duncan's multiple range test, t-test, correlation, regression analysis and Path analysis. The major results are as follows: 1) Housewives' perception degree of organic food in its variety, easy availability and contribution to health was relatively high level, but price level, reliability and packing condition was somewhat low level. Out of housewives' many images of organic food, taste health care, quality and necessity factors can be implicated. 2) Housewives' interest degree of organic food is somewhat high level 3) Housewives' consumption degree of organic food was relatively low level and was affected by their perception of oraganic food. 4) Frequency to use seasonings was the major independent variable which influenced to housewives' perception degree of organic food, while recognition on enviornmental contamination was the major independent variable which influenced to their interest degree of organic food, and their total perception on organic food was the major independent variable which influenced to their consumption degree of oragnic food. Therefore, it is considered that their total perception to it can decide the demand of organic food 5) Housewives' perception and interest degree of it was the major intervening variable which influenced to their consumption degree of oragnic food.

  • PDF

Deveolopment and Application of a module for simulating instream water of agricultural reservoir (농업용 저수지의 하천유지용수 공급모의 모듈 개발 및 적용)

  • Lee, Jaenam;Noh, Jaekyoung
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2016.05a
    • /
    • pp.517-517
    • /
    • 2016
  • 최근 기후변화로 인해 하천 건천화가 빈번히 발생함에 따라 농업용 저수지로부터 하류 하천유량을 얼마나 공급할 수 있으며, 어느 시기에 공급하는 것이 적당한가에 대한 의문이 발생하고 있다. 본 연구에서는 농업용 저수지의 하천유지용수 공급에 대한 관점에서 용수배분을 자유롭게 모의조작 할 수 있는 모듈을 개발하였고, 이를 미호천 중류의 북일 수위관측소 유역 내 위치한 저수량이 100만 $m^3$인 농업용 저수지 9개소를 대상으로 적용하였다. 관개용수량은 작물증발산량, 담수심, 침투량, 손실율 등을 고려하여 산정할 수 있도록 하였으며, 하천유지용수 공급량은 기준갈수량을 기본값으로 하였다. 또한 하천유지용수의 공급방식은 무공급, 비관개기 공급, 연중 공급, 운영률에 의한 공급의 4가지로 구분하여 일괄적인 모의가 가능하도록 구성하였다. 기상청 RCP 8.5 기후변화 시나리오를 이용하여 미래 모의기간에 대한 유역 말단부의 갈수기 하천수량 변화와 유황패턴을 분석한 결과는 다음과 같다. 첫째, 하천유지용수을 비관개기에 공급하는 저수지 운영으로 하천수량은 하천유지용수를 공급하지 않는 저수지 운영보다 연평균 1.8백만(2.0%) $m^3$ 증가, 연중 공급하는 저수지 운영보다 4.3백만$m^3$(4.7%) 증가, 운영률에 의해 하천유지용수를 공급하는 운영은 연평균 13.1백만(14.6%) $m^3$ 증가하였다. 둘째, 하천유지용수를 비관개기에 공급하는 저수지 운영은 갈수기로 갈수록 유량이 증가하였다 감소하는 것으로 나타났다. 하천유지용수를 연중으로 공급하는 저수지 운영은 비관개기에 공급하는 저수지 운영보다 갈수량(Q355) 이하의 유량을 더 증가시킬 수 있는 것으로 분석되었고 풍수량(Q95)과 평수량(Q185) 사이의 하천유량이 상대적으로 크게 증가하였다. 운영률에 의해 하천유지용수를 공급하는 저수지 운영은 하천유지유량을 공급하지 않는 저수지 운영방식보다 하천유량의 증가와 갈수기 전반에 걸쳐 유황이 안정되는 것으로 분석되었다.

  • PDF

An Analytical Study of Geologic Characteristics and Production- Related Problems of Beep Natural Gas Resources (심부 천연가스의 지질학절 부존 환경 특성과 생산관련 현안 문제점 분석 연구)

  • Chang Seungyong
    • 한국석유지질학회:학술대회논문집
    • /
    • autumn
    • /
    • pp.28-46
    • /
    • 2001
  • Natural gas is a mixture of hydrocarbon gases and impurities such as nitrogen, hydrogen sulfide, and carbon dioxide and a clean energy producing no pollution materials for combustion. Currently, the demand of the natural gas is rapidly increasing due to worldwide environmental problems. According to Hubbert's study in the past, the natural gas was predicted as rapidly depleted resources, and then the results led to high gas price and limitation of usage during 1980s. Afterward, the study of natural gas resources based on geology identified the additional natural gas resources that were not considered in Hubbert's study. They are unconventional gas, additional resources in the existed reservoirs, and natural gas in deep subsurface areas. Such additional resouces made the future of natural gas bright and pormised low and stable gas price in the future. Deep natural gas is defined as the gas existing at or below 15,000ft$(4,752{\cal}m)$ in depth from the surface. According to the study from the U.S. Geological Survey(USGS) in 1995, 1,412 TCF of technically recoverable natural gas was remained to be discovered or developed in the onshore of United States. A significant part of that resource base, 114 TCF, exists at deep sedimentary basins, and it shows wide distribution with various geological environments. In 1995, the deep gas contributed to $6.7\% of total supply amount of natural gas in the United States and is expected to be $18.7\% by 201.5. However, the development of the deep gas is a high risky business due to expensive investment and high portion of dry holes, although it is developed. Thus, for developing the deep gas economically, it is necessary to overcome many technical challenges. In this paper, for increasing success rate of the deep gas, 1) geologic and compositional characteristics, and production cost have been analyzed according to depth, 2) technical problems related to deep gas production have been summarized, and 3) finally future study areas for increasing application of the deep gas have been suggested. For reference, this paper was written based on the study results from USGS and Gas Research Institute(GRI), for the United States is doing the most active R&D in the deep gas area, and thus, has many reliable data.

  • PDF

Quality Characteristics Influenced by Different Packaging Materials in Washed Potatoes through an Integrated Washing System (통합세척시스템 활용시 포장재 종류별 세척감자의 품질 특성)

  • Kim, Su Jeong;Sohn, Hwang Bae;Mekapogu, Manjulata;Kwon, Oh Keun;Hong, Su Young;Nam, Jung Hwan;Jin, Yong Ik;Chang, Dong Chil;Suh, Jong Taek;Jeong, Jin Cheol;Kim, Yul Ho
    • Korean Journal of Food Science and Technology
    • /
    • v.48 no.3
    • /
    • pp.247-255
    • /
    • 2016
  • This study was performed to investigate the effect of packaging materials on quality characteristics of washed potatoes such as Hunter's a value, chlorophyll and potato glycoalkaloids (PGA) content during their storage for 15 days. Packaging methods were evaluated into five ways: no packaging (NP, positive control), paper bag (PB, negative control), onion net (ON), transparent oriented to polypropylene without hole (TP), opaque oriented polypropylene with 4 holes (OP). Hunter's a values of washed potatoes showed minus in NP and TP after 12 days storage, whereas all plus values were observed in those of PB, ON, and OP. Total chlorophyll content of washed potatoes was the highest in no packaging at 15 days after storage. The PGA content of washed potatoes showed low levels in flesh part (below $5mg/100g{\cdot}FW$) as well as in peel part ($4.5-9.3mg/100mg{\cdot}FW$) in all packagings up to 15 days after storage.

A Study on Development of Prototype Test Train Design in G7 Project for High Speed Railway Technology (G7 고속전철기술개발사업에서의 시제차량 통합 디자인 개발)

  • 정경렬;이병종;윤세균
    • Archives of design research
    • /
    • v.16 no.4
    • /
    • pp.185-196
    • /
    • 2003
  • The demand for an environment-friendly transportation system, equipped with low energy consumption, and low-or zero-pollution has been on the increase since the beginning of the World Trade Organization era. Simultaneously, the consistent growth of high-speed tram technology, combined with market share, has sparked a fierce competition among technologically-advanced countries like France, Germany, and Japan in an effort to keep the lead in high-speed train technology via extensive Research and development(R&D) expenses. These countries are leaders in the race to implement the next-generation transportation system, build intercontinental rail way networks and export the high-speed train as a major industry commodity. The need to develop our own(Korean) 'high-speed train' technology and its core system technology layouts including original technology serves a few objectives: They boost the national competitive edge; they develop an environmental friendly rail road system that can cope with globalization and minimize the social and economic losses created by the growing traffic-congested delivery costs, environment pollution, and public discomforts. In turn, the 'G7 Project-Development of High Speed Railway Technology' held between 1996 and 2002 for a six-year period was focused on designing a domestic train capable of traveling at a speed of 350km/h combined and led to the actual implementation of engineering and producing the '2000 high-speed train:' This paper summarizes and introduces one of the G7 Projects-specifically, the design segment achievement within the development of train system engineering technology. It is true that the design aspect of the Korean domestic railway system program as a whole was lacking when compared with the advanced railroad countries whose early phase of train design emphasized the design aspect. However, having allowed the active participation of expert designers in the early phase of train design in the current project has led to a new era of domestic train development and the implementation of a way to meet demand flexibly with newly designed trains. The idea of a high-speed train in Korea and its design concept is well-conceived: a faster, more pleasant, and silent based Korean high-speed train that facilitates a new travel culture. A Korean-type of high-speed train is acknowledged by passengers who travel in such trains. The Korean high-speed prototype train has been born, combining aerodynamic air-cushioned design, which is the embodiment of Korean original design of forehead of power car minimized aerodynamic resistance using a curved car body profile, and the improvement of the interior design with ergonomics and the accommodation of the vestibule area through the study of passenger behavior and social culture that is based on the general passenger car.

  • PDF

The Relation between Mother's LOHAS Propensity and Healthy Dietary Life Attitude perceived by Chinese University Students (대학생 자녀가 지각한 어머니의 로하스(LOHAS) 성향과 건강식생활 태도와의 관련성 연구 - 중국대학생을 중심으로 -)

  • Lee, Yeon-Jung;Ahn, Gee-Jung
    • Culinary science and hospitality research
    • /
    • v.21 no.4
    • /
    • pp.101-120
    • /
    • 2015
  • This study was conducted to examine the relation between a mother's LOHAS lifestyle propensity, healthy dietary life, and nutrient intake perceived by Chinese university students. The subjects consisted of 376 Chinese university students. The research results are summarized below. The mother's LOHAS attitude index was 76.02 points out of a perfect score of 100 points. High LOHAS attitude factors of mothers were 'health', whereas 'social welfare' scored low. The highest LOHAS attitude items of mothers that Chinese university students perceived was 'My mother uses health food, organic food, clean food'(4.26 points). Males who lived on their own in a large city and have normal BMI ($18.5{\sim}22.9kg/m^2$) perceived a high mother's LOHAS score. The highest food habit variables are 'eating without spilling food' 'cleaning up after meals around' and 'washing my hands before meals'. The highest healthy dietary life item is 'I try to maintain a pleasant and enjoyable life'(3.83 points). The highest nutrient intake attitude score is 'I tend to eat yellowish-green vegetables every day.'(3.92 points). According to mother's LOHAS lifestyle score, it was verified that the higher mother's LOHAS lifestyle score, the higher children's food habit, healthy dietary life, and nutrient intake score are. Mother's environment-friendly LOHAS attitude index has a meaningful impact on the child's food habits, healthy dietary life, and nutrient intake.