• The Journal of the Convergence on Culture Technology
• /
• v.7 no.2
• /
• pp.339-343
• /
• 2021

This study was conducted to compare the shoot development and fruit characteristics on fruit bearing branch (FBB) according to the fruiting level (FLs: FL-Low, -Middle, -High) of peach 'Cheonhong'. The number of shoots per FBB according to the FLs were most distributed in 1-2 (42%) of FL-Low, 1 (47%) of FL-Middle and 1 (42%) of FL-High. And fruit weight and soulable solide content were 210-270g (50%) and 10-12Brix (44%), 180-240g (60%) and 10-12Brix (59%), 180-240g (60%) and 11-13Brix (48%), respectively. In addition, only FL-High showed a linear regression correlation between fruit weight and number of shoots. And a linear regression equation of y=0.0126x+8.1857 (R²=0.1964, P≤0.01) is shown between the souble solid content (y) and the fruit weight (x).

• The Journal of the Convergence on Culture Technology
• /
• v.5 no.1
• /
• pp.347-352
• /
• 2019

We analyzed the correlation among fruit bearing branch (FBB) and shoot and fruit characteristics in order to select the length of FBB suitable for producing high-quality fruits of 'Soomee', a peach tree developed in Korea. The length and diameter of FBB were 26.1 cm and 6.1 mm, respectively, shoot and leaf number per FBB were 3.2 and 38.6, respectively. Of these, the coefficient of variation was very high in the shoots and leaf number. The average weight and soluble solid content (SSC) of fruit were 298.6 g and 12.2 Brix, respectively, and coefficient of variation of the fruit weight was 18.0 %, which was higher than that of SSC. As the FBB of 10-20 cm and 20-30 cm length per tree were 27.1 % and 25.4 %, respectively, the sum of short and middle FBB frequency per tree was more than 50 %. Fruits of 250-350 g and 11.0-13.0 Brix per tree were distributed in 68.6 % and 74.0 %, respectively. As a result of correlation analysis, fruit weight and shoot number were affected by the length of FBB. In particular, length of FBB showed the relation of fruit weight with $y=-0.0482x^2+2.4512x+277.36$. As a result, the length of FBB that can maximize fruit weight was analyzed as 25.4 cm. Therefore, in the filed, the suitable FBB for producing 'Soomee' peach is estimated to be about 20-30 cm.

• Proceedings of the Korean Society for Bio-Environment Control Conference
• /
• 2002.11a
• /
• pp.131-186
• /
• 2002

우리나라 유통상토에 대한 물리적 표준분석법을 설정하기 위한 연구를 실시하였다. 국내 시중에 유통되고 있는 53개 품목의 원예용 상토와 9개 품목의 수도용 상토를 대상으로 설정된 분석법을 적용하여 실험하였다. 입자밀도의 측정은 가스형 피크노메타(Micromeritics Co. Model 1305)를 사용하면 속도와 정확성 면에서 매우 유리하였다. 용적밀도는 구미에서 Sandbox법에 의한 용적밀도를 기본으로 하기 때문에 이와 유사한 성적을 얻을 수 있는 다양한 실험을 한 결과, 추다짐법(Plunger compaction method)이 가장 유의성 있는 측정 방법으로 밝혀졌다. 한편 가스형 피크노메타법에 의한 우리나라 유통상토의 입자밀도는 원예용이 1.93, 수도용이 2.43 Mg m$^{-3}$로 나타났으며, 추다짐법에 의한 용적밀도는 원예용이 0.22, 수도용이 1.01 Mg m$^{-3}$로 각각 나타났다. 수분함량은 105$^{\circ}C$ 건조기에서 16시간 건조하여 수도용상토는 (최초 무게-건조 후 무게) / (건조 후 무게) $\times$ 100으로, 원예용상토는 (최초무게 - 건조 후 무게) / (최초 무게) $\times$ 100으로 하였다. 보수력은 주로 저압용으로서 Eijkelkamp사의 Sandbox법을 사용하여 0.5, 1, 3, 5, 7, 10 ㎪의 수분장력 상태의 수분함량을 조사하였다. 포화수리전도도는 직경 5cm$\times$높이 20cm인 아크릴 원통을 이용하여 정수위별에 의한 포화수리전도도를 측정하였다. 신분석법에 의한 유통상토의 수분함량은 원예용이 평균 46.34%, 수도용이 평균 16.89%이었고 원예용 상토의 EAW는 28.4%, WBC 7.01%, OMP는 5.60 ㎪로 나타났으며, 육묘를 위한 적정 수분함량은 44.41%이었고 포화수리전도도는 1.71 cm $min^{-1}$이었다. 상토 평량시 무게를 비교한 결과 상토 부피를 달리하여도 고도의 유의성이 있었고, 상토 20cc의 평균무게는 4.92g(2.08-8.83g)이었다. 상토의 EC 측정시 상토:물의 비율이 1:2(v:v)와 1:5(v:v)분석치에 2.5배한 EC 값과는 고도의 정의 상관관계가 있었으며, 유럽법과 일본법(전농)과의 관계는 고도의 정의 상관관계가 있었다 또한 새로운 분석법(v:v 1:5)으로 측정한 EC의 평균값은 국내산 0.64, 수입산 0.33 dS m$^{-1}$이 었다. 상토의 pH 측정시 상토:물의 비율을 1:2(v:v)와 1:5(v:v)와의 관계에서는 정의 상관관계를 보였으며, 유럽법과 일본법(전농)과의 관계도 역시 고도의 정의 상관관계가 있었고, 신 분석법에(v:v 1:5) 의한 분포비율은 국내산, 수입산모두 pH 6.1-6.5의 범위에서 가장 높았다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.160-161
• /
• 2010

In this paper, trademark image retrieval system is proposed by using color information and shape information. We use the image for a color information by dividing into the area and extracting the area color distribution histogram. We use for the shape information by preprocessing of the boundary extraction, the centroid extraction, angular sampling etc. and calculating of the sum of the distance from the centroid to the boundary, the standard deviation, and the rate of long axis to short axis. In particular, centroid by using the angular sampling can extract feature and reduce the processing time. Users can perform searchs using the color and shape information, and also the two methods by mixing can be used by weighting.

• Korean Journal of Environmental Biology
• /
• v.26 no.4
• /
• pp.385-391
• /
• 2008

In Korea, Quercus acutissima distributed in good condition with high nutrients and moisture content, but Quercus variabilis in dry soil or rock habitate. In order to understand this ecological distribution of Q. acutissima and Q. variabilis, we cultivated the seedlings of two oak species treated with light, soil moisture and nutrient gradients each four level, from May to October in glass house. Then we measured the ecological niche breadth and niche overlap of the two species, and analyzed the relationship of competition using cluster analysis and PCA ordination. Ecological niche breadths of Q. acutissima under moisture and nutrient treatments were slightly wider than those under light one. Among 14 characters measured, 6 characters related with length items were wider in all the environmental treatments, but 8 characters connected with weight terms narrower in light treatment. Ecological niche breadths of Q. variabilis under moisture and nutrient treatment were wider than those of light one. Ecological niche of Q. acutissima was wider than those of Q. variabilis in all the environmental treatments. Ecological overlap between two species was higher with a range of 0.87$\sim$0.92, especially higher in soil moisture factor. These results means that Q. acutissima is more competitive than Q. variabilis, especially in soil moisture condition. Two species were ordinated with distinct group based on 9 characters. From these results, it can be explained that what Q. variabilis distributed in bad soil condition is due to the escape strategy, because of its low competitive ability to Q. acutissima in natural communities.

• Journal of Dairy Science and Biotechnology
• /
• v.32 no.2
• /
• pp.163-167
• /
• 2014

This study aimed to investigate the anti-obesity effects of Enterococcus faecalis MD366, isolated from raw milk, in diet-induced obese mice. To examine the effect, male C57BL/6J mice were fed for six weeks on three different diets, i.e., a normal diet and orally administrated saline solution (ND), a high-fat diet and orally administrated saline solution (HFD), and a high-fat diet and orally administrated E. faecalis MD366 ($10^9CFU/day$) in saline solution (HFD+MD366). After six weeks, the rate of increase in body weight was 18.1% lower in the HFD+MD366 group compared to that in the HFD group. In addition, the weight of epididymal fat pad in the HFD+MD366 group was lower than that in the HFD group. The average levels of triglycerides, total cholesterol (TC), and low-density lipoprotein cholesterol (LDL-C) were slightly reduced in the HFD+MD366 group compared to those in the HFD group. However, there were no significant differences between the groups. Measuring the adipocytes revealed that the percentage of adipocytes with a size of $2,000{\mu}m^2$ was higher than the percentages of other size classes in ND and HFD+MD366 groups, while the percentage of adipocytes larger than $5,000{\mu}m^2$ was highest in the HFD group. The mean adipocyte size in the HFD+MD366 group was smaller than that in the HFD group.

• Proceedings of the Korea Contents Association Conference
• /
• 2011.05a
• /
• pp.325-326
• /
• 2011

인체의 질량분포, 부피, 무게중심 등은 운동역학적 변인들을 분석하기위한 중요한 파라미터로 활용된다. 본 연구는 이러한 파라미터, 즉 인체분절계수를 추정하기 위한 분석도구의 개발에 관한 연구이다. 분석은 CT촬영을 통해 얻어진 2차원 의료영상데이터에 대해, 영상정보를 읽어 watershed 알고리즘을 통해 체성분에 따라 지방조직, 뼈조직, 근육조직에 따른 영역경계를 반 자동으로 구분할 수 있다. 분절계수의 추정은 최종적으로 확보한 영상에 대해, 분절경계면을 구분하여 이에 따른 질량, 부피 및 무게중심에 대한 비율을 계산하고 결과는 CSV 타입으로 저장한다. 개발된 분석도구는 연구목적에 따라 다양하게 분절화가 가능할 뿐만 아니라 영상데이터의 확보를 통해 인체분절계수 데이터베이스의 확장 구축에 기여할 수 있다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.5
• /
• pp.539-544
• /
• 2016

The aim of this study is identifying characteristics of spatial distribution using submerged debris data on the bottom of sea ground. Marine debris is classified into floating and submerged debris. These are polluting marine environment, ecology and habitat by floating and submerged. Also it takes a lot of money when it is to process the waste flowing into the ocean. In this study, it is used data of submerged debris by side scan sonar on the bottom of sea ground in Pohang port. Submerged distribution map is made to identify spatial classified characteristics of SMD(submerged marine debris) using by position and weight per area of SMD.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.17 no.2
• /
• pp.127-140
• /
• 2015

A fault is one of the critical factors that may lead to a possible ground collapse occurring in construction site. A fault core, however, possibly acting as a failure plane in whole fault zone, is composed of fractured rock and gouge nonuniformly distributed and thus can be characterized by its wide range of shear strength which is generally acquired by experimental method for stability analysis. In this study, we performed direct shear test and grain size distribution analysis for 62 fault core samples cropped from 12 different spots located in the vicinity of Kyongju and Ulsan, Korea. As a result, the range of shear strength representing the characteristics of fault cores in the study regions is determined with regard to vertical stress using a regression analysis for experiment data. The weight ratio of gravels in the samples is proportional to the shear strength and that of silt and clay is in inverse proportion to the shear strength. For most samples, the coefficient of determination is over 0.7 despite of inhomogeneity of them and consequently we determined the lower limit and upper limit of the shear strength with regard to the weight ratio by setting the confidence interval of 95%.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.9 no.1
• /
• pp.119-126
• /
• 1985

형상은 3차원이지만 2차원 문제로 이상화하여 해석할 수 있는 탄성구조물의 최적설계를 내연기관 연결봉(Connecting Rod)을 예제로 사용하여 진행하였다. 연결봉은 각 부위에서의 두께는 다르나 평면응력상태에 있다고 가정하였다. 연결봉의 질량을 최소화하기 위해 두께의 분포 및 2차원 모델 경계의 모양을 설계변수로 채택하였고 설계변수 및 응력치에 대한 제한조건을 적용하였다. 설계감도계수 계산을 위해 Variational Formulation, Material Derivative, Adjoint Variable이론을 도입하였고 최적화 방법으로는 Gradient Projection Method를 사용하였다. 최적설계 결과 현재 사용중인 연결봉 무게의 20%를 줄일 수 있음이 밝혀졌다.