• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 1997.11a
• /
• pp.303-308
• /
• 1997

전기설비에서 광범위하게 사용하고 있는 유압변압기는 연소성과 환경오염의 문제등으로 인하여 에폭시 수지를 주재로한 진공주형형 몰드변압기로 발전하였다. 따라서 현재는 건축물의 옥내에는 광범위하게 사용되고 있다. 본 논문에서는 에폭시 수지를 사용한 진공주형형 몰드변압기를 시료로 사용하여 전기실과 유사한 환경에서 연소시험에 의한 난연성과 자기소화성을 확인하여 몰드변압기로 인한 소화설비의 불필요성을 입증하였고, 청정소화 약제의 하나인 NAF S-III소화제로서 소화실험을 시행하여 그 소화시간을 측정하고 연소 시험의 결과와 비교 평가하였다. (중략)

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2005.05a
• /
• pp.107-110
• /
• 2005

몰딩 공정중에 발생된 보이드(void)는 제품의 기계적인 물성치에 큰 영향을 준다. 미세균열(micro crack)이나 박리(delamination)등의 결함을 유발하는 보이드의 형성을 최소화시킬 수 있는 방법으로 진공 몰드를 제시하였다. 본 연구에서는 대기압 상태와 진공 상태에서 나타나는 유동 선단에서의 보이드 생성과 소멸을 실험관찰 하였고 몰드 패키지의 현상을 실험적으로 비교하였다. 아울러 진공 몰드의 공정 이론과 조건을 구하였다.

• Journal of Korea Foundry Society
• /
• v.42 no.1
• /
• pp.3-11
• /
• 2022

In this study, the parameters on the shrinkage defect of HR3C alloy was secured through computer simulation research, and the ingot mold with greater than 85% of sound area was designed and manufactured. Moreover, the optimized coagulation was proposed at design stage through computer simulation and test was performed upon ingot manufactured. After the test, the defect pattern was analyzed through cutting and non-destructive inspection to verify the parameter and ingot mold design. Based on the verification results, shrinkage defect parameters such as Niyama, Feed Efficiency, and Hot Tear Intensity of HR3C Alloys were obtained. In addition, through the secured parameters, a plan for designing ingot mold with a Non-defect area of 85% or more was secured.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.2136-2137
• /
• 2011

본 연구에서는 몰드변압기의 다양한 진단방법 연구를 위해 몰드변압기의 진동을 측정 분석하였다. 현장에서 사용되어지고 있는 3상 몰드변압기를 용량별로 진동수를 측정하고 FFT 분석을 실시하였다. 현장실측을 통해 몰드변압기의 상태진단을 진동으로 확인할 수 있었다. 진동주파수만을 측정하여 판단하는 것은 어려움이 있었으며, 단, 삼상변압기의 각 상에 대한 비교평가는 가능한 것으로 확인되었다.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.784_785
• /
• 2009

본 논문에서는 2[MVA]급 배전용 몰드변압기의 온도분포를 유한요소해석을 통하여 수행하였다. 몰드변압기의 온도상승한도와 허용최고온도를 전자기적 열원에 대한 분석을 통하여 계산하고 그 계산된 열원을 바탕으로 열적 해석의 열원으로 사용하여 계산하였다. 일반적으로 변압기의 수명은 내부의 전반적인 열적 특성보다는 특정 부위의 온도 분포에 의해 결정되며, 특히 변압기 내부 최고점의 온도(hot spot temperature)값이 허용치 이상으로 상승할 경우 절연내력의 저하로 인해 변압기의 수명은 급격히 감소한다. 이러한 수명개선을 위해 몰드 변압기의 철심과 고압.저압권선의 Joule's loss을 계산하여 열원을 계산하였고, 그 결과를 토대로 배전용 몰드변압기의 철심과 고압 저압권선의 온도상승 분포와 최고점의 온도분포를 예측하였다.

• The Journal of the Korea Contents Association
• /
• v.13 no.3
• /
• pp.43-53
• /
• 2013

This paper covers the manufacturing process to improve the quality of the puppet for stop-motion films, especially focuses on the mold making and casting process those are the key steps of the puppet making. Unlike the general mold for a duplication, the mold for puppets has special functions to fix an armature and inject casting materials stably inside, and it is repeatedly baked at high temperature. The practical information about puppet makings is provided including various predictable problems, expertise from many professionals, vender list, and so on.

• Proceedings of the KIEE Conference
• /
• 2006.07c
• /
• pp.1564-1565
• /
• 2006

현재 전세계적으로 170kV급 이하의 초고압 지중케이블 접속함으로 기존의 현장몰드방식의 TMJ(Tape Molded Joint)와 부품조립방식의 PJ(Prefabricated Joint)보다 조립시간이 짧고 작업자의 숙련도가 높지 않아 경제적이며, 유지보수에 장점을 가진 고무몰드 접속함(PMJ)이 채용되고 있으며, 이러한 추세는 적용 전압급이 점차 상승하면서 230kV급까지 그 비중이 늘어나고 있는 경향을 보이고 있다. 당사에서는 이러한 추세에 발맞추어 154kV급 고무몰드접속함의 개발 당시의 Silicone의 기초물성시험 DATA 획득, 고무몰드 UNIT 및 금형 설계 기술 확립과 접속 공법 개발의 경험을 바탕으로 230kV급 고무몰드접속함의 개발에 성공하였다.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.19 no.3
• /
• pp.125-131
• /
• 2013

In order to protect agricultural products against damage by physical load, various shock absorbing materials is used. As the demands of environment protection increase, the use of plastic materials have been restricted. On the other hand, Pulp mold products have some benefits - easy manufacturing, superior shock absorbing and eco-friendly. In order to develop pulp mold tray for melon packaging as shock absorbing packaging material, we investigated physical properties and vibration transmission characters of 180, 200 and 220 g pulp mold tray for melon. As the weight of pulp increased, compression strength and shock absorbing performance increased, while vibration transmissibility decreased. Especially in case of 180g pulp mold tray, it is not suitable for melon packaging because the transmitted vibration acceleration was higher than the forced vibration acceleration. And 200g pulp mold tray is suitable for melon packaging because the vibration transmissibility was lowest in three trays. And the vibration acceleration transmitted to the melon in edge of pulp mold tray was higher than to the melon in center of pulp mold tray. As the result of the simulated transportation test, the firmness of melon packaging using pulp mold tray was higher than that of conventional packaging. Therefore, these results suggest that pulp mold tray packaging could be suitable for melon packaging.

• Fire Science and Engineering
• /
• v.15 no.4
• /
• pp.78-85
• /
• 2001

This dissertation is research on the fireproof characteristic of molded transformer and the extinguishable characteristics of the NAF S-III. As the research method, a theoretical examination has been made for the combustion process of epoxy resin, which was the main material of molded transformer, and extinguishing process of NAF S-III, which has recently been used in the clean extinguishable chemicals. Furthermore, for its proof, the experiments on combustion and extin-guishment on molded transformer has been performed. By installing the actual molded transformer in and artificial the horizontal heating furnace which has similar conditions with the electrical substation, and after subsequently ignited, the extinguishing process has been observed by classifying it into the natural extinguishment of the ignited transformer, and extinguishable chemical in NAF S-III has been injected. The volume of injected extinguishable chemical was the economical amount which was equipped with the extinguishable capability on the molded transformer under combustion, and it was calculated with the Announcement of the Ministry of Government Administration and Home Affairs as the basis. With the injection of the calculated extinguishable chemicals, the ignited transformer has completely extinguished within one minute.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.7
• /
• pp.859-866
• /
• 2010

In this study, microinjection molding process using the newly developed micromold system, namely modularized and sectioned micromold system (MSMS), has been carried out for a replication of multi-level microstructures. The present MSMS consisted of several micromold modules, each having cross-sectional microstructures on the top surface. The micromold modules were precisely fabricated by deep X-ray lithography and subsequent nickel electroforming. By assembling the micromold modules, an MSMS having multi-level microstructures, which could be used as a mold system in micromolding processes, was obtained. In this manner, polymeric multi-level microstructures, such as the triangular prism microstructures on a stepped surface, were successfully replicated by the microinjection molding process.