• Nuclear Engineering and Technology
• /
• v.16 no.2
• /
• pp.97-105
• /
• 1984

A method and computer code for the uncertainty analysis in the top event unavailability are developed and tested by combining Monte Carlo Method and Moments method with fault tree reduction technique. Using system fault trees and unavailability data selected in WASH-1400, the efficiency of the proposed method is tested and these results are compared with those obtained by Monte Carlo method. It is shown that the results are sufficiently good in accuracy and computation time is considerably reduced compared with those by Monte Carlo method.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.12 no.2
• /
• pp.129-140
• /
• 1999

추계론적 해석은 구조계 내의 해석인수에 존재하는 공간적 또는 시간적 임의성이 구조계 반응에 미치는 영향에 대한 고찰을 목적으로 한다. 확률장은 구족계 내에서 특정한 확률분포를 가지는 것으로 가정된다. 구조계 반응에 대한 이들 확률장의 영향 평가를 위하여 통계학적 추계론적 해석과 비통계학적 추계론적 해석이 사용되고 있다. 본 연구에서는 비통계학적 추계론적 해석방법 중의 하나인 가중적분법을 제안하였다. 특히 구조계의 공간적 임의성이 큰 특성을 가지고 있는 반무한영역에 대한 적용 예를 제시하고자 한다. 반무한영역의 모델링에는 무한요소를 사용하였다. 제안된 방법에 의한 해석 결과는 통계학적 방법인 몬테카를로 방법에 의한 결과와 비교되었다. 제안된 가중적분법은 자기상관함수를 사용하여 확률장을 고려하므로 무한영역의 고려에 따른 해석의 모호성을 제거할 수 있다. 제안방법과 몬테카를로 방법에 의한 결과는 상호 잘 일치하였으며 공분산 및 표준편차는 무한요소의 적용에 의하여 매우 개선된 결과를 나타내었다.

• The Journal of the Korea Contents Association
• /
• v.12 no.6
• /
• pp.346-352
• /
• 2012

Radiation dose estimation on the newborn and infants during radiation examinations, unlike for the adults, is not actively being progressed. Therefore, as an index to present exposure dose during radiation examinations on newborn and infants, entrance skin dose was measured, and the result was compared with results of monte carlo simulation to raise reproducibility of entrance skin dose measurement, and it was proved that various geometry implementation was possible. The resulting values through monte carlo simulation was estimated using normalization factors for entrance skin dose to calibrate radiation dose and then normalized to a unit X ray radiation field size. Average entrance skin dose per one time exposure was $78.41{\mu}Gy$ and the percentage error between measurement by dosimeter and by monte carlo simulation was found to be -4.77%. Entrance skin dose assessment by monte carlo simulation provides possible alternative method in difficult entrance skin dose estimation for the newborn and infants who visit hospital for actual diagnosis.

• Progress in Medical Physics
• /
• v.10 no.2
• /
• pp.73-81
• /
• 1999

Scatter correction for single photon emission computed tomography (SPECT) plays an important role to improve image quality and quantitation. The purpose of this study was to investigate three scatter correction methods using Monte Carlo simulation. Point source and Jaszack phantom filled with Tc-99m were simulated by Monte Carlo code, SIMIND. For scatter correction, we applied three methods, Compton window (CW) method, triple window (TW) method, and dual photopeak window (DPW) method. Point sources located at various depths along the center line within a 20-cm phantom were simulated to calculate the window ratios and corresponding scatter fractions by evaluating the polynomial coefficients for DPW method. Energy windows were located in W$_1$=92-125 keV, W$_2$=124-126 keV, W$_3$=136-140 keV, W$_4$=140-141 keV, and W$_{5}$=154-156 keV. The results showed that in Jaszack phantom with cold sphere and hot sphere, the TW gave the closest contrast and percentage recovery to the ideal image, respectively, while CW overestimated and DPW underestimated the contrast of ideal one. All three scatter correction methods showed an improved image contrast. In conclusion, scatter correction is essential for improving image contrast and accurate quantification. The choice of scatter correction method should be made on the basis of accuracies and ease of implementation.

• The Korean Journal of Applied Statistics
• /
• v.13 no.2
• /
• pp.477-488
• /
• 2000

A distance measure between two Latin-hypercube designs is defined and its expected value is computed. It was computed by using mathematical statistics, numerical analysis (multidimensional numerical integration), Monte-carlo method, and the theory of asymptotic normal distribution. For the comparison of two Latin-hypercube designs with same structure but different randomness, the difference of expected values of response function and information mass of experimental designs are considered. These methods may be useful in comparison between two general experimental designs.

• Proceeding of EDISON Challenge
• /
• 2013.04a
• /
• pp.167-177
• /
• 2013

원자 힘 현미경(Atomic Force Microscopy, AFM) 탐침과 표면 사이의 좁은 틈에서 형성되는 나노미터 크기의 물 메니스커스는 AFM을 사용하여 측정하는 이미지에 영향을 주는 것으로 알려져 있다. 본 연구에서는 격자 기체 기반의 몬테카를로 시뮬레이션을 이용하여 탐침의 곡률과 결합 에너지 특성이 메니스커스의 형상과 그로 인해 발생하는 모세관 힘에 어떠한 영향을 미치는지 알아보았다. 일반적으로 탐침의 곡률이 커질수록, 친수성이 작아질수록 메니스커스 폭은 좁아지고 모세관 힘이 줄어드는 것을 확인하였다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2019.05a
• /
• pp.387-389
• /
• 2019

자산 선택을 통해 최적 포트폴리오를 구성하는 데 있어 모든 경우의 수를 탐색하는 것은 불가능하다. 본 논문에서는 몬테카를로 시뮬레이션을 통해 탐색 공간을 축소하고, 축소된 탐색 공간에 유전 알고리즘을 적용함으로써 최적 포트폴리오에 근사하는 부최적 포트폴리오를 생성하는 방법을 제안한다.

• Journal of the Korea Computer Graphics Society
• /
• v.30 no.2
• /
• pp.1-9
• /
• 2024

In this paper, we propose a new method to visualize different vector field patterns from density data. We use moving least squares (MLS), which is used in physics-based simulations and geometric processing. However, typical MLS does not take into account the nature of density, as it is interpolated to a higher order through vector-based constraints. In this paper, we design an algorithm that incorporates Monte Carlo-based weights into the MLS to efficiently account for the density characteristics implicit in the input data, allowing the algorithm to represent different forms of white noise. As a result, we experimentally demonstrate detailed vector fields that are difficult to represent using existing techniques such as naive MLS and divergence-constrained MLS.

• Journal of Conservation Science
• /
• v.27 no.2
• /
• pp.127-134
• /
• 2011

In this study, there has been investigated the simulation of irradiation dose using Monte Carlo methodology and experimental substantiation for the biological control of wooden cultural property. In the evaluation of fungal contamination on wooden cultural property, Dongyae, from exhibition storage, Aureobasidium pullulans was mainly identified. But these microorganisms were completely inactivated by 20 kGy gamma irradiation. For dosimetry simulation of Dongyae, Monte Carlo methodology with MCNP was used. The real dosimetry was measured using alanin dosimeters (at 7 different points on the front plan and 7 points on the back plan). Simulated and experimental results are compared and good agreement is observed. These result shows that irradiation can offer biologic control of wooden cultural property by optimal irradiation dose through high penetration power and Monte Carlo simulation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.11
• /
• pp.2015-2021
• /
• 2017

Recently, a lot of attention is fallen to IoT(Internet of Things) for hyper-connected society and the number of unlicensed wireless device has been increasing. Thus, this paper analyzed the impact of unlicensed wireless device on the basis of 802.11ah on licensed LTE user equipment in 900 MHz frequency band for efficient frequency use. As the interference analysis method, Minimum Coupling Loss (MCL) method and Monte Carlo (MC) method were used. In case of one interferer, minimum separation distance between interferer and victim was calculated as about 22 m through the MCL method under the assumption of the worst case. The maximum number of interferer to meet the interference probability of 5% below within a cell radius of the victim was computed as about 3000 by using MC method based on statistical technique. The analysis method and results in this paper are expected to be used for the coexistence between unlicensed wireless device and licensed wireless device.