• Journal of the Korean Institute of Intelligent Systems
• /
• v.14 no.4
• /
• pp.390-395
• /
• 2004

A semiconductor manufacturing process is the complicate and dynamic process, and consists of many sub-processes. An etching process is the most important process in the semiconductor fabrication. In this paper, the decision support system based upon data mining and knowledge discovery is an important factor to improve the productivity and yield. The proposed decision support system consists of a neural network model and an inference system based on fuzzy logic Firstly, the product results are predicted by the neural network model constructed by the product patterns that represent the quality of the etching process. And the product patters are classified by expert's knowledge. Finally, the product conditions are estimated by the fuzzy inference system using the rules extracted from the classified patterns. Prediction of product qualities can be linked to each input and process variables. We employ data mining and intelligent techniques to find the best condition of the etching process. The proposed decision support system is efficient and easy to be implemented for the process management based upon expert's knowledge.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.11B
• /
• pp.698-706
• /
• 2005

In this paper, we investigate the parameters of the IEEE 802.11e MAC protocol, CWmin and AIFS, in terms of their capability of QoS control. The delay and the bandwidth performances are selected as the QoS medics to examine the characteristics of those parameters. A policy on MAC parameters usage, thereby, is proposed. We regard the MAC-level traffic classification as the differentiation in the channel accessibility, and thus the delay differentiation is referred to a main issue of the class-level QoS control. Realizing the tight relationship between the delay performance and the parameter AIFS, we derive an analytical expression of their relationship through an analysis of the MAC mechanism. Various simulations are examined which show the validity of our assertions, and a policy on the parameters usage is proposed based on those observations.

• 한국벤처창업학회:학술대회논문집
• /
• 2016.04a
• /
• pp.67-69
• /
• 2016

이 연구는 경영학과 MBA교육과정이 세상의 모든 제품과 기업에 공통적으로 적용되듯이, 세상의 어떤 분야의 제품이든 그 시작인 한 개 착안에서부터 시장력 확보를 위해 시도 되는 도전행위의 매개인 모든 착안과 아이디어가 기업이 되는 과정인 제벤처행위에 공통적으로 적용되는 학문이 될, MVA(PH-MVA, master of venture arming, 벤처무장학)학의 개념적 모델링의 시작에 필요로하는 정의론과 개념론으로, MBA에 있어 경영학원론이 개론화되듯, MVA에 있어 그 개론서가 될 벤처학원론서 설계에 있어서의 시작인 1편 기초론을 구성하는 내용을 벤처창업이나 기업의 신제품개발 부서에의 취업을 희망하는 학생들과 제벤처 생태계의 모든 직간접 관련 직무자 들이 공통적으로 무장하면 벤처적 행위에 필요로하는 여러 가지 직무자들 같이 소통력은 물론 직무매칭력 등의 분업 협업력이 매우 높아 질 것이라는 주장을 바탕으로한다. 그리고 제시하는 정의와 개념을 제벤처 생태계 전체의 표준으로 참고 삼아, 누구의 어떤 모델이든, 창조경제의 일부로서 미생들의 벤처(창업, 기업만들기 도전)행위나 완생기업들의 신제품개발 모두에 두루 적용 될 수 있는, 누구나가 이해, 공감, 교감, 습득이 용이한 벤처학 개발이 왕성하게 활성화될 수 있도록 하는 것이 곧 창조경제 활성화를 위한 학자들의 사명이자 새로운 성장동력 모델의 발굴이기도하다는 측면에서의 동참이 될 수 있기를 바라는 마음이다. 아울러, 이러한 정의와 개념을 바탕으로 전개되어, 벤처생태계 전반에서 수행 될 교육이 개인들의 창업(기업만들기)을 목표로하는 공부가 되기도하고 연장에, 완생기업들이 필요로하는 신제품개발에 있어서의 기본적인 능력과 자질을 갖춘 인재선발적 취업준비공부도 될 수 있는 통합적 교육이되어야한다는 취지를 가지고있다. 또 연구를 통해 제벤처(기업의 신제품개발 도전협업행위 포함) 생태계에서의 직무자들의 직무매칭력 및 협업행위에 있어서의 다양한 용어와 정의와 개념들의 제각각으로 부터 발생되는 상치(相馳, 제각각, 불통, 협업마찰, 대립, 갈등, 등)력을 해소하는 것이 역설적으로 협업력을 최적으로 활성화 할 수 있다는 사실을 모두가 인지, 수용토록 하고자 함을 목적으로한다. 이러한 연구를 전벤처단계의 벤처기초학을 바탕으로하는 제벤처생태계 개념을 일원화 통합화하는 연장에 전개되는 공통무장교육 모델화를 목적으로한다.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2011.01a
• /
• pp.107-108
• /
• 2011

Since the development of railway technology, the current urban Railway the first train line in the country for safe operation control automatic/unattended operation, automatic train operation equipment available (ATO) on time and reliable operation has introduced. ATO Automatic operation controlled by the value (Target velocity) and the feedback value (Actual velocity) by the error between the backing and braking of the train by repeated low energy efficiency. In this paper, given a fixed distance stations between time operation with minimal energy in the driving characteristics and driving trains are modeled. Therefore, in line 5 real route time sectional drive straight sections for experimental data analysis / draft Section / curved and section of the train on that line is selected according to the changing driving patterns to minimize the energy optimal driving patterns were presented.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.5 no.5
• /
• pp.1-11
• /
• 2001

The purpose of this study is to develop the main program and pre/post processor for the geometric and plastic non-linear analysis of steel jacket structures subjected to wave and earthquake loadings. In this paper, steel jackets are modelled using geometric non-linear space frames and wave loadings re evaluated based on Morrison equation using the linear Airy theory and the fifth Stokes theory. Random wave is generated using JONSWAP spectrum. For earthquake analysis, dynamic analysis is performed using artificial earthquake time history. Also the plastic hinge method is presented for limit analysis of steel jacket. In the companion paper, the pre/post processor is developed and the numerical examples are presented for linear and non-linear dynamic analysis of steel jackets.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.5 no.6
• /
• pp.37-46
• /
• 2001

In this research, a controller design method based on optimization is proposed that can satisfy constraints on maximum responses of building structures subject to around excitation modeled by partially stochastic process. The class of controllers to be optimized is restricted to LQR. Weighting matrix on controlled outputs is used as design variable. Objective function, constraint functions and their gradients are computed by the parameterization of control gain with Riccati matrix. Full state feedback controllers designed by proposed optimization method satisfy various design objectives and their necessary maximum control forces are computed for the production of actuator. LQG controllers composed of Kalman filter and LQR designed by proposed method perform well with little deterioration. So it is possible to design output feedback controllers satisfying constraints on various maximum responses of structures.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.9 no.1 s.41
• /
• pp.1-7
• /
• 2005

The optimal seismic retrofitting of NPP(Nuclear Power Plant) cabinet structures that contain seismic category 1 relays was studied in this paper. During earthquake event, the failure modes of relays are not appeared in form of structural failure, but are appeared in form of contact chatter of relay. Therefore, the retrofitting of cabinet has to be aimed at the reducing of the structural response, such as acceleration. In this study, the optimal characteristic values of dampers were searched by ${\mu}$-GA (micro-Genetic Algorithm) scheme for several installation patterns. To keep accuracy and efficiency of analysis, the structural models of cabinet were considered as a frame structure. The responses of structure were obtained inform of acceleration response spectra derived from the results of nonlinear time history analysis including damping nonlinearity. The objective function of the optimum procedure was constructed based on the maximum ratio of maximum spectral value and target GERS (General Equipment Ruggedness Spectra). The results show the good improvements of fitness for adequate retrofitting pattern. Especially, the improvements of fitness were remarkable when the values of damping exponents are low.

• Science of Emotion and Sensibility
• /
• v.7 no.1
• /
• pp.1-7
• /
• 2004

This study aims to validate the effectiveness of CAVE system with an Arm-Master in the evaluation of virtual prototypes. A virtual kitchen with a refrigerator was presented in the CAVE system. Subjects put in and pull out virtual objects by using the Arm-Master. Twelve subjects, six males and six females, participated in the six experimental conditions : three types of refrigerator door grips and two reaction forces. After each trial, subjects evaluated a door grip of the virtual refrigerator in terms of easiness of operation, similarity in force, presence etc. The results show the mean values of vortical-type door grips are greater than the horizontal pocket-type door grip. Also the subjects preferred 5N in the reaction force of the Arm-Master rather than 15 N when they open and close virtual door. Unexpectedly, female subjects significantly marked low scores in the evaluation terms compared ruth mali subjects. It explains the Arm-Master should be modified much more if it works effectively in design evaluation.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.1
• /
• pp.56-67
• /
• 2012

In this thesis, to compensate the sweep nonlinearity occurring in the high resolution radar system using FMICW or FMCW, the method of the estimation of the nonlinearity is proposed. The nonlinear phase component caused by the nonlinear characteristic of the radar system is modelled as a linear combination of the sinusoidal functions consisting of various magnitudes and phases(systematic nonlinear phase error) and a random component(stochastic nonlinear phase error). From two IF signals that are measured respectively independently for two reference point targets lying in different distances which are known, a sparse linear equation is made and solved by least squares method to estimate the nonlinear phase component. The estimated component can be used for predistortion method to compensate the sweep nonlinearity.

• 한국HCI학회:학술대회논문집
• /
• 2006.02b
• /
• pp.221-226
• /
• 2006

원격 3차원 디자인 협업 환경이란 원거리에 있는 디자이너들이 3차원 모델을 함께 동시적으로 다루는 협업 환경으로서, 제품 개발 프로세스의 비용과 시간을 단축하는데 매우 중요한 역할을 한다. 그러나 이에 대한 연구는 아직 미비한 실정이며 기존의 연구들도 2차원 데스크탑 환경에 제한된 문제점이 있다. 따라서 본 연구는 새로운 협업 환경의 제안을 통해 지리적으로 떨어진 디자이너들간의 3D 모델에 관한 원활한 협업을 촉진하는 것을 목표로 한다. 본 연구에서 제안한 증강현실 기반의 원격 3차원 디자인 협업 환경은 3D 모델의 공유를 위한 회전 원반(turntable)과 상대의 위치 및 제스처 정보를 제공하는 가상 그림자(virtual shadows)로 구성된다. 동시적으로 회전하는 회전원반은 물리적인 매개체로서 가상물체와 실제 세계를 자연스럽게 연결하는 동시에 상대의 실재감을 높인다. 가상그림자는 가상물체 주위로 보여지는 사람들의 손과 팔의 움직임을 시각화하여 공유하는 것으로, 상대의 위치뿐 아니라 지시, 제스처 등 행동에 대한 인식이 지속적으로 이루어지게 한다. 프로토타입을 제작하고 사용자 평가 실험을 실시하여 3차원 모델을 검토하는 단계에 그 유용성이 있음을 확인하였다. 데스크탑 환경의 모델링 툴에 익숙한 사용자들은 실제 공간에서 가상물체를 조작할 수 있음에 긍정적인 반응을 보였고 회전원반과 가상그림자의 제공은 태스크 수행의 정확도를 높이며 협업을 촉진하는 결과를 보였다. 본 연구는 환경적 제약으로 원활하게 이루어지지 못했던 3D 모델에 관한 원격 협업에 의사소통의 장을 마련하고 이를 촉진시킨다는 점에서 그 의의가 있다. 본 환경에서 제시한 상대방과 협업대상물에 대한 심리적, 물리적 공유 감을 증대시키는 방법들은 3D 모델에 관한 디자인 협업에서 확장되어 다른 원격 협업을 지원하는 데도 적용될 수 있을 것이다.