• Journal of the Korean Applied Science and Technology
• /
• v.32 no.4
• /
• pp.649-660
• /
• 2015

Data obtained from the Calpuff inverse modeling estimate the emission amount of pollutants, and enable to establish the aim for reduction through the comparison of various cases. This study pursued to accumulate the fundamental data by the Calpuff inverse modeling for five areas in the vicinity of Donghae harbor, which focused on reduction of atmospheric fine dust. As a result of evaluation of the allowed emission amount for local sites, site-D required the most reduction, $4.95{\mu}g/m^2{\cdot}S$, based on the atmospheric guideline, $50{\mu}g/m^3$. The theoretical mitigation could decrease the average concentration of PM10 to $42.6{\mu}g/m^3$ for the study field (Donghae waste water treatment plant). Modeling only for site-A emission showed the potential concentration around the residential area of Donghae harbor, $40{\sim}50{\mu}g/m^3$. However, it will rise over $50{\mu}g/m^3$ with the addition of background level. Therefore no more emission would be allowed. Site-B including commercial area and unpaved field required the reduction of $0.11{\mu}g/m^2{\cdot}S$ due to vehicles and fugitive dust. Site-C and E did not emit additional pollutants.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2006.04a
• /
• pp.76-81
• /
• 2006

창녕군 증산리 지역은 신규 취수원 확보 일환으로 강변여과 방식 취수 가능성이 한국수자원공사에 의해서 평가되고 있는 지역이다. 강변여과 방식 취수의 타당성 평가를 위해 현장 지질조사, 시추조사, 전기 비저항 탐사 및 고해상도 탄성파 탐사를 수행하였다. 또한 대상 연구지역에서의 개략적 취수 가능량 산정을 위해 모델링 평가가 수행되었으며, 개별 정호에 대한 양수량 산정을 위해 시험 정호를 설치하였다. 현장 시추 조사와 시료에 대한 입도 분석 결과, 연구 지역의 충적층 두께는 35m 전후이며, 주 대수층 구간은 지표하 $25{\sim}35m$인 것으로 추정되었다. 또한 주 대수층 구간의 수리전도도는 $10^{-2}cm/sec$ 이상으로 주로 모래섞인 자갈층으로 구성되어있는 것으로 평가되었다. 또한 전기비저항 조사 결과는 부분적으로 매우 낮은 비저항 분포 지층을 보여주고 있으며, 이는 주로 실트 및 점토로 된 지층이 부분적으로 퇴적되어 있음을 지시하며, 고해상도 탄성파 탐사 결과는 전반적으로 지하수위는 지표하부 5m 전후에 분포하고, 충적층의 하부 경계는 35 내지 45m인 것으로 해석되었다. 지하수 모델링을 통해, 취수 목표량인 180,000톤/일은 주대수층까지의 지하수위 강하 없이 확보 가능할 것으로 평가되었다. 또한 개별 정호의 산출 특성을 평가하기 위해 시험 정호를 설치하여, 실제 2,700톤/일 예비 양수 시험을 수행하였다. 예비 양수 시험 결과, 양수정에서의 수위 강하는 개략 10m, 양수정관측정에서는 약 0.3m의 수위강하만이 관찰되었으며, 양수 영향권이 수 십 m를 넘지 않을 것으로 판단되었다.서의 S97과 JBR의 세포감염 억제율은 3.85%와 3.63%로 나타났다. $textsc{k}$-casein, CU는 로타바이러스 S97과 JBR에 대해 농도 2000UM에서 97%이상의 억제효과를 나타냈으며, sialic acid는 억제효과가 거의 없었다. K-casein, GMP는 송아지뿐만 아니라 유아의 로타바이러스에 의한 설사를 억제할 수 있을 것으로 기대된다.을 향상하기 위해서는 이러한 부위에 대한 미생물 오염을 낮출 수 있는 세심한 현장 품질관리가 필요하다.en and adolescents, analysed by country, age group and gender. The paper discusses the places young consumers can turn to in trying to fulfil their growing consumer needs. It also examines how much money is at their disposal. It then concludes by considering the influence of "financial socialization" on how young people deal with money.nsumption visions based on the various perspectives, consumers are influenced in the apparel buying decision-making. Many subjects reported experiencing positive affect when imagining positive outcomes of produc

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.2024-2028
• /
• 2007

우리나라의 물관련 이슈는 수자원뿐만 아니라 사회, 경제 환경 등의 범위까지 확대되어 복합적이며, 기존 방법론과 기술만으로는 해결에 어려움이 있다. 따라서 새로운 기술적/방법론적 도구 개발의 필요성에 따라 통합수자원관리가 하나의 방법으로 받아들여지고 있다. 통합수자원관리는 지속가능한 수자원관리를 목표로하며, 물과 이와 관련 다양한 요소를 고려하는 통합적인 방법론이다. 그러므로 의사결정에 있어 전체론적인 접근이 필요하며, 세부적인 요소와 요소간의 연관관계를 파악하는 것이 중요하다. 이를 위하여 본 연구에서는 통합수자원관리의 기반 도구 중의 하나인 통합수자원관리 모델링 환경인 WaterRing 시범시스템을 개발하였다. WaterRing은 모델연계에 있어 필수적인 표준성, 사용편의성 및 모델공유를 제공하며, 모델코드 자체보다 모델의 개발에 많은 노력을 기울일 수 있도록 설계되었다. 따라서 수자원분야 및 다양한 분야의 모델을 연계할 수 있다. 모델의 연계를 위하여 기본모델단위를 설정하고 각각의 기본모델단위의 결합을 통하여 보다 큰 시스템으로 구성할 수 있도록 하였다. 기본모델단위는 입력/상태/출력의 세 가지 기본요소와 내부수행 루틴으로 구성되어 있다. 기본모델단위 사이의 결합을 정의하기 위하여 BPM(Business Process Management)(Arkin, 2002)와 STELLA의 모델 결합방식을 활용하였다. 기본모델단위는 독립적인 수행단위로 표준적인 입력과 출력을 수행한다. 따라서 입력과 출력의 속성이 같은 기본모델단위는 결합할 수 있다. 본 연구에서 시범적으로 개발된 수자원통합모델링환경 WaterRing은 통합수자원관리의 실현에 있어 평가, 계획에 이용될 수 있다. 그러므로 향후 시스템의 개발이 완료되면 우리나라의 통합수자원관리의 실현을 위한 기반도구로서 많은 역할이 기대된다. 홍수기에 측정된 성과를 바탕으로 고수위대의 수위-유량관계 곡선식을 개발하여야 할 것으로 판단된다. 본 연구를 통해 일부 확인된 바와 같이, 일반적인 자연하천이 아닌 감조하천의 경우는, 각각의 수위대별 유량 값의 변화가 발생하는 바 기간별 혹은 간조와 만조부를 포함하여 유량측정을 하여야 할 것으로 판단된다. 청폐화담탕(淸肺化痰湯)은 LPS로 유도된 macrophage에서 NO와 염증Cytokine 생성량을 억제하였고 murine macrophage에서 NF-${\kappa}$B 활성을 억제함으로써 iNOS와 염증Cytokine 유전자 발현을 하향조절 하였다. 이러한 청폐화담탕(淸肺化痰湯)의 항염작용으로 천식, 기관지염, 폐렴, 결핵, 산후감모 등의 호흡기 질환에 응용할 수 있으리라 사료된다.im}$5개월), 9.44${\pm}$1.05 6${\sim}$ll개월)으로 개월에 관계없이 전반적으로 유사한 비율을 나타내었다. 분획물(첨가농도 15.6 ${\mu}$g/ml)은 60%의 저해효과를 나타내면서 농도 의존적으로 그 저해효과가 컸으며 250 ${\mu}$g/ml 농도에서는 80%의 저해효과를 관찰 할 수가 있었다. 에틸아세테이트분회물의 경우 디글로로메탄 분회물에 비해 다소 낮은 저해효과를 나타내었지만 250 ${\mu}$g/ml 농도에서 약 60%의 세포독성 효과를 나타내었다. 디클로로메탄 분획물과 에틸아세테이트 분획물에 의한 면역 활성 증진 효과를 검토한 결과, 디글로로메탄 분획물은 첨가농도 1 ${\mu}$g/ml에서 94%로 Yac-1표적세포를 사멸시켰으며 에틸아세테이트 분획물도 동일 농도에서 96%의 억제효과를 나타내었다. CTLL세포를 이용

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.45 no.5
• /
• pp.1-8
• /
• 2008

The belief propagation method that has been studied recently yields good performance in disparity extraction. The method in which a target function is modeled as an energy function based on Markov random field(MRF), solves the stereo matching problem by finding the disparity to minimize the energy function. MRF models provide robust and unified framework for vision problem such as stereo and image restoration. the belief propagation method produces quite correct results, but it has difficulty in real time implementation because of higher computational complexity than other stereo methods. To relieve this problem, in this paper, we propose a fast algorithm of the belief propagation method. Energy function consists of a data term and a smoothness tern. The data term usually corresponds to the difference in brightness between correspondences, and smoothness term indicates the continuity of adjacent pixels. Smoothness information is created from messages, which are assigned using four different message arrays for the pixel positions adjacent in four directions. The processing time for four message arrays dominates 80 percent of the whole program execution time. In the proposed method, we propose an algorithm that dramatically reduces the processing time require in message calculation, since the message.; are not produced in four arrays but in a single array. Tn the last step of disparity extraction process, the messages are called in the single integrated array and this algorithm requires 1/4 computational complexity of the conventional method. Our method is evaluated by comparing the disparity error rates of our method and the conventional method. Experimental results show that the proposed method remarkably reduces the execution time while it rarely increases disparity error.

• Journal of Korea Water Resources Association
• /
• v.46 no.4
• /
• pp.345-359
• /
• 2013

In order to manage water quality efficiently and systematically through TMDL (Total Maximum Daily Load), the demand for the construction of spatial data for stream networks has increased for use with GIS-based water quality modeling, data management and spatial analysis. The objective of this study was to present an improved KRF (Korean Reach File) design as framework data for domestic stream networks to be used for various purposes in relation to the TMDL. In order to achieve this goal, the US EPA's RF (River Reach File) was initially reviewed. The improved design of the graphic and attribute data for the KRF based on the design of the EPA's RF was presented. To verify the results, the KRF was created for the Han River Basin. In total, 2,047 stream reaches were divided and the relevant nodes were generated at 2,048 points in the study area. The unique identifiers for each spatial object were input into the KRF without redundancy. This approach can serve as a means of linking the KRF with related database. Also, the enhanced topological information was included as attributes of the KRF. Therefore, the KRF can be used in conjunction with various types of network analysis. The utilization of KRF for water quality modeling, data management and spatial analysis as they pertain to the applicability of the TMDL should be conducted.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.42 no.4 s.304
• /
• pp.11-18
• /
• 2005

For expressing intention the human often use body languages as well as vocal languages. Of course the gestures using arms and hands are the representative ones among the body languages. Therefore it is very important to understand the human arm motion in human-computer interaction. In this respect we present here how to estimate 3D pose of human arms by using computer vision systems. For this we first focus on the idea that the human arm motion consists of mostly revolute joint motions, and then we present an algorithm for understanding 3D motion of a revolute joint using vision systems. Next we apply it to estimating 3D pose of human arms using vision systems. The fundamental idea for this algorithm extension is that we may apply the algorithm for a revolute joint to each of the revolute joints of hmm arms one after another. In designing the algorithms we focus on seeking closed-form solutions with high accuracy because we aim at applying them to human computer interaction for ubiquitous computing and virtual reality.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.27 no.4
• /
• pp.289-296
• /
• 2014

The rebar detailing is an important work influencing the final performance and quality of RC structures. But it is one of the most irrational and illogical activity in construction site. Many groups of workers, including main contractors, structural engineers, shop drawers, rebar fabricators, and etc., participate in this activity. A loosely-organized process for this activity is apt to produce a big amount of rebar loss or even degraded structures. A 3-dimensional rebar auto-placing system, called as Rebar Hub, has been designed and implemented in this research. Rebar Hub provides a totally integrated service from 3D structural modeling of buildings to rebar auto-placing considering anchorage, splice, and the length of ordered rebar. In addition, Rebar Hub can recognize the 2D drawing CAD files and then build 3D structural models which are used for the start point of 3D rebar auto-placing. After rebar auto-placing, each members of the 3D structural model have rebar information belonging to them. It means that the rebar information can be used for the afterward works such as quantity-survey, manufacturing and fabrication of rebars. Rebar Hub is showing outstanding performance while applying to practical projects. It has almost five times productivity and reduces the rebar loss up to 3~8% of the initially-surveyed amount of rebar.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.6
• /
• pp.649-658
• /
• 2009

The recent emergence of the paradigm of new urban planning for building intelligent urban spaces, such as U-City and U-Eco City, of which the concept of ubiquitous technology is applied, requires high quality three-dimensional spatial information of the urban area. The aim of this study is to build a multi-dimensional spatio-visual information system that includes the solution for visualization, spatial information search, analysis, and evaluation by integrating various types of 3D-modeled spatial information concerning the large urban-size area based on the latest GIS application technology. The range of this study is the integration, visualization, and utilization of spatial information with the goal of building 3D virtual urban environment of high-quality and high-resolution by increasing the utilization of the systematic urban facilities in order to fully reflect the actual user's needs, using the aerial LiDAR data as the plan to overcome the limitations of the existing 3D urban modeling. By reproducing the virtual urban environment the most similar to the actual world through the mash-up of satellite images and aerial photos on the standard format of spatial information constituted of properties and signs, the system will be built with many analysis and utilization functions that support the view and sunlight analysis, various administrative tasks, as well as the decision making process of the city.

• Tunnel and Underground Space
• /
• v.31 no.6
• /
• pp.593-609
• /
• 2021

We proposed a numerical method for the thermo-mechanical behavior of rock fracture using a grain-based distinct element model (GBDEM) and simulated thermally induced fracture slip. The present study is the benchmark simulation performed as part of DECOVALEX-2023 Task G, which aims to develop a numerical method to estimate the coupled thermo-hydro-mechanical processes within the crystalline rock fracture network. We represented the rock sample as an assembly of Voronoi grains and calculated the interaction of the grains (blocks) and their interfaces (contacts) using a distinct element code, 3DEC. Based on an equivalent continuum approach, the micro-parameters of grains and contacts were determined to reproduce rock as an elastic material. Then, the behavior of the fracture embedded in the rock was characterized by the contacts with Coulomb shear strength and tensile strength. In the benchmark simulation, we quantitatively examined the effects of the boundary stress and thermal stress due to heat conduction on fracture behavior, focusing on the mechanism of thermally induced fracture slip. The simulation results showed that the developed numerical model reasonably reproduced the thermal expansion and thermal stress increment, the fracture stress and displacement and the effect of boundary condition. We expect the numerical model to be enhanced by continuing collaboration and interaction with other research teams of DECOVALEX-2023 Task G and validated in further study experiments.

• Journal of Intelligence and Information Systems
• /
• v.28 no.3
• /
• pp.81-103
• /
• 2022

It recognizes the importance of mental health and well-being worldwide and consistently records public happiness figures through the World Happiness Report. COVID-19, which occurred in China in 2019, has changed people's daily lives a lot. The accumulation of stress caused by the prolonged epidemic is affecting people's happiness. The present research has revealed negative mental health effects such as "depression" and "anxiety" after the pandemic. In this regard, it was revealed that the happiness index was also lowered numerically. It is insufficient to analyze specific issues about changes in the issue of happiness felt by the public in Korean society after the epidemic. Therefore, this study aims to identify changes in the happiness issue of Koreans after COVID-19 and find ways to improve happiness. Data were collected from various aspects by searching 32 sub keywords based on ERG theory by dividing the period before and after COVID-19. The results of topic modeling before and after COVID-19 were classified into seven areas of happiness index 2.0 published by the National Assembly Future Research Institute and compared and analyzed. Based on the results of comparing the results of the before and after topic from the perspective of each area, a plan to improve happiness was presented. The academic implications of this paper are that the research on psychological changes caused by COVID-19 was expanded by mining the opinions of the actual public on 'happiness'. In addition, it has practical implications in that it specifically presented measures to promote happiness by utilizing the area of objective happiness indicators based on the existing research on ways to reduce happiness promotion unhappiness.