• Journal of the Korean Wood Science and Technology
• /
• v.38 no.6
• /
• pp.587-601
• /
• 2010

This review attempted to overview characteristics of nanocellulose from various sources, its isolation methods, and properties of nanocellulose-based nanocomposites. Currently, nanocelluloses could be obtained from a variety of cellulose sources, including wood pulp, tunicate, bacterial cellulose etc., and are isolated by various ways such as chemical, physical, or biological methods. The length and width of nanocellulose is in the range of 100~300 nm long and 5~50 nm wide although characteristics of nanocellulose shows a wide variability, depending on sources and isolation method. Nanocellulose is also being used as a reinforcement in the nanocomposites via various methods. Many water soluble polymers were reinforced by the incorporation of nanocellulose, which significantly improves tensile and storage moduli of the nanocomposites. In order to be used for hydrophobic polymers, the surface of nanocellulose was modified. Even though there is a significant progress in the utilization of nanocellulose as a reinforcement of polymers, further research is required to find a niche market of nanocellulose-reinforced nanocomposites. In addition, isolation methods of producing the nanocellulose in a large quantity for commercial applications should be developed to extend the application of nanocellulose-based bio-nanocomposites in future.

• Journal of the Korean Wood Science and Technology
• /
• v.35 no.6
• /
• pp.91-99
• /
• 2007

Activities of the extracellular enzyme from Fomitopsis palustris, a brown-rot fungi, and by which crystallinity changes of cellulose in the various softwoods, such as Larix leptolepsis, Finns rigida, Finns koraiensis and Finns densiflora by liquid culture, were investigated. Activity of Cellobiohydrolase (CBH) from F. palustris was detected in the every test softwoods culture, showing activities of the Endoglucanase (EG), $\beta$-glucosidase (BGL) and $\beta$-1,4-xylosidase (BXL). It was shown high enzyme activities in the sapwood culture than heartwood of the same wood species, However, the enzyme activities in most of test wood cultures increased with longer incubation time, indicating a possibility of intermix sapwood and heartwood for degradation process by enzyme. Also it was shown that protein patterns of the extracellular enzyme from F. palustris in wood particle substrate of the several domestic softwoods were similar with each other wood species, which suggested the possibility of mixing all softwoods in saccharification by enzyme from F. palustris. Crystallinity reduction value of cellulose by F. palustris was 4.2~20.4% in 4 weeks cultivation, 12.9~28.9% in 8 weeks.

• Journal of Animal Science and Technology
• /
• v.53 no.2
• /
• pp.133-138
• /
• 2011

Two experiments were conducted to determine the effects of supplementing different levels of kaolin (Exp. 1) and effects of age of layers and levels of kaolin (Exp. 2) on the performance, egg and shell quality parameters of laying hens. In Exp.1, 64 laying hens of 58 wks age were randomly allotted to 4 treatments of 16 hens in each. Dietary treatments were basal diet supplemented with 0.0, 0.2, 0.4 and 0.6% kaolin. In Exp. 2 96 laying hens were divided into 6 groups of 16 hens each in a 2 ${\times}$ 3 factorial arrangement (two different ages, 30 and 58 wk and three levels of kaolin, 0.0, 0.2 and 0.4%). In both the experiment there were linear decreases in feed intake (P<0.001), improvement in FCR (P<0.05), and egg production (P<0.05), with increasing dietary kolin level. Supplementation of kaolin had no effect on the egg and shell quality parameters in both experiments. Thus, it is concluded that kaolin may improve performance, and 0.2% level showed the best laying performance.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.3D
• /
• pp.413-420
• /
• 2011

An experiment was conducted to suggest the road pavement material combining wooden chip crushed from little useful roots and branches from logging sites or wood waste from construction sites with urethane resin. For the specimen, the mass ratio of urethane resin to construction wood waste chip/lumber waster chip was set to three different levels of 0.5, 0.75, and 1.0, which was measured, mixed with mixer, and molded; 7 days after, tensile strength test, elasticity test using golf balls and steel balls, permeability coefficient measurement, and flammability test were executed. As the result, the tensile strength of the specimen at the dry state in the air exhibited the range of 0.2-1.1MPa, and there was no change after 7 days of aging. When submerged in water, however, the strength was partially diminished; the diminishing rate was greater for less urethane resin usage, and therefore it appears desirable to set the mass ratio of resin to the wood waste chip over 0.75 to consider the moisture intrusion by precipitation and such. As the result of elasticity test, the GB and SB coefficients of the specimen using wood waste chips and urethane resin were measured to be low at below 20%, exhibiting excellent elasticity as road pavement material. Also, the permeability coefficient was over 0.5mm/sec for specimens of all combinations, exceeding the standard value required after construction for permeable pavement material, and the flammability of wood-type pavement material was evaluated to have no practical issues.

• Journal of Adhesion and Interface
• /
• v.3 no.4
• /
• pp.1-9
• /
• 2002

The main goal of this study was to analyze the effect of process additives, i.e. maleated polypropylene (MAPP), and nucleating agent on the viscoelastic properties of different types of extruded polypropylene-wood plastic composites manufactured from either PP homopolymer, high crystallinity PP or PP impact copolymer using dynamic mechanical thermal analysis. And also, the esterification reaction between wood flour and maleated polypropylene, and its role in determining the mechanical properties of wood flour-polypropylene composites was investigated. The wood plastic composites were manufactured using 60% pine wood flour and 40% polypropylene on a Davis-Standard $Woodtruder^{TM}$. Dynamic mechanical thermal properties, polymer damping peaks(than ${\delta}$), storage modulus (E') and loss modulus (E") were measured using a dynamic mechanical thermal analyzer. XPS (X-ray Photoelectron Spectroscopy), also known as ESCA (Electron Spectroscopy for Chemical Analysis) study of wood flour treated with MAPP was performed to obtain information on the chemical nature of wood fiber before and after treatment. To analyze the effect of frequency on the dynamic mechanical properties of the various composites, DMA tests were performed over a temperature range of -20 to $100^{\circ}C$, at four different frequencies (1, 5, 10 and 25 Hz), and at a heating rate of $5^{\circ}C/min$. From these results, the activation energy of the various composite was measured using an Arrhenius relationship to investigate the effect of maleated PP and nucleating agent on the measurement of the interphase between the wood and plastic of the extruded polypropylene wood plastic composites.

• Korean Journal of Food Science and Technology
• /
• v.47 no.2
• /
• pp.158-163
• /
• 2015

Fustin comprised >98 and 73.0-86.7% of the total flavonoid content in the bark, and the stems and lignum of Rhus verniciflua, respectively. The butein, fisetin, and sulfuretin content varied between 0.31-2.17, 0.27-3.32, and 0.15-0.80 mg/g on a dry weight basis, respectively, in different parts of Rhus verniciflua. The urushiol content was 5.09-6.29, 55.05-56.30, and 0.38-0.39 mg/100 g on a dry weight basis in the stems, bark, and lignum, respectively. This showed that the bark of the tree had the highest urushiol content. C15:3 (pentadecatrienyl catechol), C15:1 (pentadecenyl catechol), and C15:2 (pentadecadienyl catechol) comprised 63, 33-35, and 2-3% of urushiol congeners in the tree bark, respectively.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.6
• /
• pp.910-914
• /
• 2005

This study was to determine the inhibitory effect of ethanol extract of leaf, bark and xylem of Quercus aliena Blume and, consecutively, of organic solvent subfractions against food borne pathogens. The ethanol extracts of leaf, bark and xylem of Quercus aliena Blume were shown to have antimicrobial effect against Gram-positive and Gram-negative bacteria. Listeria monocytogenes and Salmonella Typhimurium were more resistant to ethanol extracts of the Quercus aliena Blume tissues compared with Bacillus cereus and Escherichia coli O157:H7. The ethanol extract of Quercus aliena Blume leaf showed the strongest antimicrobial activity against food borne pathogens, followed by those of xylem and bark. The ethanol extract treatment $(500\~1,000\mu g/mL)$ of Quercus aliena Blume leaf completely reduced the growth of B. cereus and L. monocytogenes within 24 hour whereas $2,000\mu g/mL$ of ethanol extract was needed for complete growth inhibition of E. coli O157:H7 and S. Typhimurium. Among organic solvent subfractions obtained from the ethanol extract of leaf, bark and xylem of Quercus aliena Blume, the ethyl acetate fraction showed the strongest antimicrobial activity, but no antimicrobial activity was observed in chloroform, hexane and water fractions.

• KSBB Journal
• /
• v.23 no.6
• /
• pp.494-498
• /
• 2008

We investigated the bioethanol production using wood biomass hydrolysate which obtained from the supercritical water (SCW) treatment. SCW-treated hydrolysate was used C-source of culture medium in shaking flask culture for bioethanol production. When the concentrated SCW-treated hydrolysate (SCW3) was used, yeast cell growth was slower compared with those in other SCW-treated hydrolysate (SCW1, SCW2). In addition, the bioethanol productions were 0.51 to 0.56 (%,w/v) when SCW1, SCW2, and SCW3 were used. Therefore, we removed the toxic phenolic compound in SCW-treated hydrolysate by pretreatments of activated charcoal and calcium hydroxide. Activated charcoal reduced more efficiently the phenolic compounds in SCW3 by 94.6%. Finally, when we pretreated SCW3 by activated charcoal and this was used for bioethanol production, 0.96 (%,w/v) bioethanol was produced and the ethanol yield based on reducing sugar reached 0.5.

• Research in Plant Disease
• /
• v.18 no.2
• /
• pp.101-108
• /
• 2012

In 2006, pinewood nematode, Bursaphelenchus xylophilus, was isolated from about 50 years old trees of Pinus densiflora and P. koraiensis showing leaf-wilt and -drying symptoms in Gwangju, Gyeonggi-do and Chuncheon, Gangwon-do. Isolation of pinewood nematodes from sapwood of infected pine trees showed no difference in population density between tree species and among the sampling heights on the main stem. Migration of pinewood nematodes in the host tree were investigated by inoculation of red pine (P. densiflora, 3 years old) seedlings with B. xylophilus. The nematodes seemed to move in red pine seedlings prior to multiplication and it might have taken about 20 days to start multiplication and expression of symptoms including wilt and dieback. In initial time after inoculation, nematodes started migration through the cortical resin canal from inoculated site and further showed upward and downward movements. More nematodes were observed in cortical resin canal during early period of inoculation and later in resin canal of xylem and tracheid also while, the pith still remained free from nematode. The density of B. xylophilus was higher in seedlings of low-vigor with poor root growth than in seedlings of normal root growth. Seedlings showing high density of B. xylophilus exhibited stem discoloration and secondary infection by fungus at the inoculation site.

• Journal of the Korean Wood Science and Technology
• /
• v.40 no.1
• /
• pp.26-37
• /
• 2012

Recently, the demand and supply on the Hanok have been increased. However, Hanok should be requested larger section of structural members because of excessive roof weight. So, structural skin-timber was manufactured to get a lightweight structural member. The structural skin-timber has exterior shape with larger section but a great volume of wood be removed. The reduced strength of structural skin-timber can be supplemented by hybridizaion of structural member. Japanese larch and Domestic pine were used to manufacture the structural skin-timber. Structural skin-timbers of rectangular shape and cylinder shape were manufactured and tested to evaluate the bending properties. The intended strength property could not be obtained because member had been suffered severe damage by precision deficiency of manufacturing machine. However, if precision of manufacturing machine would be improved and additional hybridizaion of structural skin-timber would be done, lightweight structural member will be able to be manufactured. Structural skin-timber did not showed statistical significancy between two species, so it is possible to use pine mixed with larch. Only MOR of larch showed statistical significancy between rectangular shape and cylinder shape, so it is necessary to use of those as separate things. However, the rest of skin-timber can be judged mixed using because of non statistical significancy. The objective of this study was the development of lightweight larger structural member with relatively strength. If hybrid member of skin-timber could be developed with wood-ceramics, lightweight steel and more, it can be possible to be used as a building material of Hanok, interior material, post & beam construction material and more.