• Transactions of the Korean Society of Automotive Engineers
• /
• v.16 no.3
• /
• pp.44-51
• /
• 2008

The performance design and analysis of an electric motor for vehicles is very complicated due to the variety of parameters. This paper presents the design of the BLDC motor for electric air compressor in high voltage(42V) system and compares with the characteristics of IPM, SPM type BLDC motor. Futher, optimal design for the electric motor has been carried out using Equivalent Magnetic Circuit and FEM Modelling. By analyzing the design results, it is found that design parameters for BLDC motor provided an useful tool for vehicles motor design.

• Proceedings of the KAIS Fall Conference
• /
• 2008.11a
• /
• pp.446-449
• /
• 2008

본 논문에서는 신규 개발품인 자동 싱킹시트의 구조와 작동원리를 파악하고 새롭게 개발하는 제품에 대한 새로운 성능평가 방안에 관한 연구를 수행하였다. 기존 시트와의 변경 사항을 고려하여 자동 싱킹시트의 개발 단계에서 성능을 평가할 수 있는 항목을 도출 하고자 하였다. 이 는 자동 싱킹시트의 특성상 모터가 부착되고 부품이 변경되는 부를 고려하여 3가지 대표 성능 평가항목인 고정부의 유격, 작동력인 토크, 자동 싱킹시트의 작동시간을 주요 평가항목으로 도출하였다. 또 한 각 항목별 성능평가방법에 대해 적절한 방법을 모색하고 자동 싱킹시트에 대한 성능지수로의 적용방법을 연구하였다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.467-470
• /
• 2002

Internet provides the useful method to monitor the current states of the machine tool no matter where a personnel is monitoring them. In this paper, a monitoring method of the torque of the machine tool's spindle induction motor using internet is suggested. The torque of vector controlled induction motor is estimated without speed measuring sensor. Only stator currents are measured to estimate the magnetizing current which is used to calculate flux linkage, rotor velocity and motor torque. Graphical programming is used to implement the suggested algorithm, to monitor the torque of an induction motor in real time and to make the estimated torque monitored on client computers. To solve the fluctuation problem of estimated torque caused from instantly varying rotating speed of an induction motor, the rotating speed is reconstructed based on the measured current signals. Mechanical part of the machine tool is also reconstructed using the data obtained from preliminary experiments. Torque of the spindle induction motor is well monitored on the client computers with 3% error range under various cutting conditions.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.50 no.1
• /
• pp.23-29
• /
• 2001

A BLDC motor has a serious drawback that torque pulsation is generated in every commutation period though it has many advatages compared to the conventional DC Motor. In this paper, the influence of commutation time on torque pulsation is studied. Generally in calculating the torque of BLDC motor, it is assumed that the decaying phase back EMF is constant, but the torque model considering decaying phase back EMF is introduced here. Through it, the torque in commutation period has torque pulsation component caused by commutation itself and it cannot be removed perfectly even if there is no current pulsation. To reduce the torque pulsation, a new method is proposed, which controls a point of commutation and the optimal point of commutation is found. Simulation shows that proposed method reduces the torque pulsation considerately.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.1667-1672
• /
• 2009

The spherical motor is an electric machine which is able to tilt its shaft on 3-dimensional space as using electromagnetic force. Recently a permanent magnet is remarkable material for applying electric machinery, because of high magnetic flux density. In this paper, a spherical motor, which has permanent magnet on its rotor, is researched. As known, the spherical motor has a special feature as 3 degrees of freedom (D.O.F) operation. This performance can be realized by using electromagnetic torque between coils and magnets. Therefore, in this paper, a permanent magnet spherical wheel motor is introduced and performance characteristics are analyzed for improving of operation stability.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.3 no.2
• /
• pp.42-52
• /
• 2000

A torque control method of a switched reluctance motor for the position control of a tank gun is presented. One of the widely used torque control scheme, torque sharing function method, is investigated and a new torque sharing function method is proposed that extends the definition region of the conventional TSF to both the positive and negative torque production regions. By using this definition, all kinds of the control inputs that consider switching on/off angle control as well as the current profiling can be described. A parametrized representation of the current profiles is proposed by using a series of B-spline functions, which reduces memory requirement and enables additional controllers. Optimal determination of the TSFs are also investigated for various control objectives. Moreover, the comparison study of each objective is presented. Since this method generalizes all of the possible control input, the current and torque profiles obtained from the optimization are the most suitable control input that satisfy the objectives.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.8
• /
• pp.1217-1223
• /
• 2015

In this paper, we study the problem of torque ripple minimization in Brushless DC Motors (BLDC) and proposes a disturbance observer (DOB) based controller in order to efficiently reduce the torque ripple. In the DOB based control system, an equivalent disturbance (plant disturbance and effect of modelling error) is cancelled by its estimate. When the DOB controller is applied to BLDC motors, the effect of inverter switching is considered as an equivalent disturbance and to be cancelled by the DOB controller. Through computer simulations, it is shown that the performance of the proposed DOB controller is superior to that of the conventional PI controller. In the case where the numerical values of resistance and inductance are not known exactly, it is shown that the proposed DOB controller achieves better performance than the PI controller.

• Proceedings of the KIEE Conference
• /
• 1999.07a
• /
• pp.176-178
• /
• 1999

The Synchronous Reluctance Motor(SynRM) was made and experimented. Salient type SynRM was manufactured by cutting two sides of the three phase squirrel case rotor. So this prototype motor has same stator and capability with the counterparts of the induction motor. The airgap flux density, inductance and torque characteristics was inspected by Finite Element Analysis (FEA). The static torque experiments was accomplished. The paper proposed the effect of rotor bar by comparing two models.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.870-872
• /
• 2000

This paper deals with the effect of rotor thickness variation and winding method in high torque hybrid Permanent Magnet(PM) step motor. As these parameters vary. The flux distribution in airgap and torque characteristics are influenced, which is related to output power. efficiency and cost. These parameters and characteristic variations were evaluated by using Finite Element Method (FEM) and experiment method. From these results. Characteristic analysis for the optimum design was studied and prototype motor was made to test performance analysis.

• Proceedings of the KIEE Conference
• /
• 1998.07a
• /
• pp.67-69
• /
• 1998

In order to design or predict the performance of a cylindrical electrostatic motor it is necessary to analyze the torque generated by such a structure. In this paper a simple but sufficiently accurate analytical model is developed for use in design. Conformal mapping are used to model the capacitance and torque of the motor as a function of the rotor position, using a quasi-static, two-dimension approximation, the effect of an insulating dielectric layer on the stator or rotor is also evaluated.