• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.7
• /
• pp.799-807
• /
• 2014

This paper describes the development of an indoor locomotion assistive robot, Ball-Chair, comprising a novel drive system. This robot facilitates locomotion assistive operation in narrow spaces, in which common wheelchairs cannot move easily. The Ball-Chair has two main features: its structural feature and driving mechanism. The exoskeleton frames of the Ball-Chair have been designed with octagonal shapes resembling a circle, for minimizing its volume and weight. Additionally, all its driving parts (including the ball) are mounted within of the robot to enhance its safety. The Ball-Chair features a reverse ball-mouse driving mechanism comprising two driving omni-wheels in the x- and y-axes. By controlling the speed of each omni-wheel, a holonomic driving system that can facilitate omnidirectional locomotion has been achieved using only two wheels. The effective movement of the Ball-Chair in any direction within narrow indoor spaces was experimentally verified. The paper outlines the development procedure in detail.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.10
• /
• pp.919-926
• /
• 2013

Experiments were conducted to determine the operating characteristics of a small-scale ORC (organic Rankine cycle) system for various low-temperature heat sources. A small-scale ORC power generation system adopting R-245fa as a working fluid was designed and manufactured. Hot water was used as the heat source, and the temperature was controlled using 110-kW electric resistance heaters that provided temperatures of up to $150^{\circ}C$. An open-drive oil-free scroll expander directly connected to a synchronous generator was installed in the ORC unit. Experiments were conducted by varying the rotational speed of the expander under the same heat source temperature conditions. The factors that influence the performance of the small-scale ORC system were analyzed and discussed.

• Journal of Energy Engineering
• /
• v.19 no.2
• /
• pp.128-135
• /
• 2010

This paper introduces step by step procedures for the fabrication and operation of an embedded solar tracker. The system presented consists of application software, compactRIO, C-series interface module, analogue input module, step drive, step motor, feedback devices and other accessories to support its functional stability. CompactRIO that has a real-tim processor allows the solar tracker to be a stand-alone real time system which operates automatically without any external control. An astronomical method and an optical method were used for a high-precision solar tracker. CdS sensors are used to constantly generate feedback signals to the controller, which allow a solar tracker to track the sun even under adverse conditions. The database of solar position and sunrise and sunset time was compared with those of those of the Astronomical Applications Department of the U.S. Naval Observatory. The results presented here clearly demonstrate the high-accuracy of the present system in solar tracking, which are applicable to many existing solar systems.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.7
• /
• pp.1445-1451
• /
• 2005

Home-Network is an integrated network of the PC and all electric home appliances in the home so that they can communicate with each other. In the 21th century, here are various technology for Home Network environment such as HomePNA, IEEE 1394, Ethernet Lan and Bluetooth. For Home Network construction, generally, the standard series interface 'RS232' is used to make communication possible between electric home appliances. However Home network using RS232 has a problem. That is, All machines have to be connected to each other with RS232 using Point-to-Point mode. In this case, the system becomes complicated because we have to use circuits as much as there are machines and increased expenses. To improve this problem, In this thesis, designed home network using RS422 Multi-drop mode serial communication and controled it with embedded linux system. And connected RS422 with motors and sensors using PIC to make the home network virtual environment.

• Journal of Korea Multimedia Society
• /
• v.14 no.3
• /
• pp.392-402
• /
• 2011

Snow fall and icing on traffic roads in the winter season cause not only inconvenience but unexpected traffic accidents, so the proper measures are needed. The existing road information system is being installed for steep slope roads in mountain areas, however, it is not widely adopted because it is too expensive. In this paper, a novel and cost-effective road weather information system especially for snow fall and icing on roads is proposed. The system consists of digital temperature and relative humidity sensor, infrared temperature sensor, ultrasonic sensor, CMOS camera, and two types of control/communication board for ubiquitous sensor network to send the data to server. The server program including the decision making method with received data is also described. Experimental results are provided to prove the feasibility of the proposed system.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.6 no.6
• /
• pp.873-880
• /
• 2011

As environmental pollution, global warming, and exhaustion of fossil fuel become global issue recently, there has been strong research motivation to develop green energy technology. Along the same line of motivation, some research efforts have been put into the development of environment-friendly bicycle equipped with various smart energy technologies to increase the usability of the bicycle as short-distance transportation. Among the technologies related with new generation bicycle, PAS (power assist system) is one of the most important systems that are essential in efficiently integrating human power and the electrical power supplied by electric motor driven by battery. In this paper, a novel torque sensor technology which is core component for PAS is proposed. Unlike existing technologies, strain gauges are attached to rear shaft directly under the hub bearings, which eliminates the requirement of slip-ring, Furthermore, the sensor is able to not only measure the torque transmitted to driving axle by human but also estimate the position of the gear to which the chain is currently engaged.

• The Bulletin of The Korean Astronomical Society
• /
• v.41 no.2
• /
• pp.53.1-53.1
• /
• 2016

국립대구과학관 천체 관측 핵심시설인 1m 반사망원경을 개발하고 설치 완료하였다. 본 발표에서는 국립대구과학관 1m 망원경의 시스템 사양과 개발 및 설치과정을 전반적으로 기술하고 앞으로의 활용계획에 대해 소개하고자 한다. 이번에 도입된 주망원경은 지난 2014년 11월부터 광학계 및 마운트 설계를 시작으로 2016년 5월까지 약 1년 6개월의 개발기간을 거쳐 설치 완료되었다. 순수 국내기술로 개발된 주망원경은 주경 1,000mm(부경 300mm)의 유효구경을 가지며 후방초점거리가 700mm인 초점비 F/8의 리치-크레티앙 방식의 광학계로 설계되었다. 레이저 간섭계를 이용하여 거울면 전체의 형상 오차를 정밀하게 측정한 결과 주경면 PV < ${\lambda}/4$, RMS < ${\lambda}/20$, 부경면 PV < ${\lambda}/10$, RMS < ${\lambda}/50$의 형상 정밀도를 가진다. 포크형태의 경위대식 마운트 구조로 방위각, 고도 양축과 디로테이터에 각각 모터가 장착되어 움직이는 다이렉트 드라이브 방식으로 구동된다. 최대 구동속도는 $2^{\circ}/s$이상, 포인팅 정밀도는 2'이하, 10분간 추적 정밀도는 3"이하(10분간 오토가이더 추적 정밀도는 1"이하)의 구동 성능을 가진다. 제어용 컨트롤 시스템은 JTCS(Justek Telescope Control System)를 사용한다. 성능 평가를 위해 시험 관측된 10~13등급 사이 10개의 별들에 대한 FWHM 측정결과는 4~5" 범위에 있다. 앞으로 지속적인 성능 평가와 업그레이드를 통해 향후 정밀도를 높여 학술 연구용으로 공개할 예정이다. 이번 국립대구과학관 1m 주망원경의 도입으로 지역 천문교육 프로그램이 한 단계 더 도약할 수 있을 것으로 기대한다.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.6
• /
• pp.95-102
• /
• 2019

As the number of fish keepers increases, fishbowl-related convenience products are on the rise. Existing products are not welcomed by consumers because of their lack of functions or high price. In this paper, we deal with a system that remotely controls sensors and motors of fish bowl based on Raspberry Pi and Arduino. In Android applications, you can use the following functions. firstly, feeding. Second, water changing. Third, it measures, visualizes temperature and pH values including alert function. Through the several experiments, it was verified that the system can be quickly accessed from the outside, and when it is appropriate to change water. This system allows the user to keep the fish more comfortable and safe.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.886-887
• /
• 2015

There is a growing interest in and demand for power industry acceleration and energy efficiency due to the increased energy consumption, environmental issues. Electronic power IT convergence industries such as intelligent power system has attract attention as new growth engine industry. A large number of sensors and motors are being installed following unmanned, automated in existing incoming panel management system. Observe the operating conditions and rapid response is essential. Despite the need for immediate action to be taken in the event of various later failed to recognize the emergency power can lead to accidents. In this paper, we propose a new architecture of the implementation of incoming panel monitoring system for power monitoring, fault detection, maintenance and system control using open source hardware platform and Wi-Fi networks.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.39 no.8
• /
• pp.645-651
• /
• 2015

The objective of this study is to experimentally investigate the effect of design parameter on the mass ratio of a central-driven ejector. The design parameters are the primary nozzle area and distance ratios, diffuser exit-area ratio and mixing-tube length ratio. The experimental setup was an open-loop continuous circulation system which has a movable nozzle ejector, an electric motor-pump, a water tank, a control panel and high-speed camera unit. We calculated the mass ratio using the measured primary and suction-flow rates with the experimental parameter of primary water-flow rate or pressure. The results showed that the mass ratio increased with the primary nozzle distance ratio and mixing tube length ratio, while the mass ratio decreased with the primary nozzle-area ratio and diffuser exit-area ratio.