• The Journal of the Acoustical Society of Korea
• /
• v.37 no.1
• /
• pp.73-81
• /
• 2018

The quality of side scan sonar images is determined by the frequency of a sonar. A side scan sonar with a low frequency creates low-quality images. One of the factors that lead to low quality is a high-level noise. The noise is occurred by the underwater environment such as equipment noise, signal interference and so on. In addition, in order to compensate for the transmission loss of sonar signals, the received signal is recovered by TVG (Time-Varied Gain), and consequently the side scan sonar images contain non-homogeneous noise which is opposite to optic images whose noise is assumed as homogeneous noise. In this paper, the SSCS (Structural Sparsity based Compressive Sensing) is proposed for removing non-homogeneous noise. The algorithm incorporates both local and non-local models in a structural feature domain so that it guarantees the sparsity and enhances the property of non-local self-similarity. Moreover, the non-local model is corrected in consideration of non-homogeneity of noises. Various experimental results show that the proposed algorithm is superior to existing method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.4C
• /
• pp.341-348
• /
• 2009

In this paper, we propose a grouping technique for the SDD(Synchronous Digital Duplexing) based on OFDMA(Orthogonal Frequency Division Multiple Access). The SDD has advantages of increasing data efficiency and flexibility of resource since SDD can transmit uplink signals and downlink signals simultaneously by using mutual time information and mutual channel information, obtained during mutual ranging process. However, the SDD has a disadvantage of requiring additional CS to maintain orthogonality of OFDMA symbols when the sum of mutual time difference and mutual channel length between AP(access point) and SS(subscriber station) or among SSs are larger than CP length. In order to minimize the length of CS for the case of requiring additional CS in SDD, we proposes a grouping technique which controls transmit timing and receive timing of AP and SS in a cell by classifying them into groups. Performances of the proposed grouping technique are evaluated by computer simulation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.3
• /
• pp.277-288
• /
• 2013

3GPP LTE-Advanced (Third Generation Partnership Project Long Term Evolution-Advanced) as a next generation mobile communication standard introduced small base stations such as femto cells or pico cells, and D2D (Device-to-Device) communications between mobiles in the proximity in order to satisfy the needs of rapidly growing wireless data traffic. A diverse range of topics has been studied to solve various interference situations which may occur within a single cell. In particular, an introduction of a small base station along with D2D communication raises important issues of how to increase the channel capacity and frequency efficiency in HetNets (Heterogeneous Networks). To this end, we propose in this paper methods to manage the interference between the macro cell and other small cells in the HetNet to improve the frequency efficiency. The proposed CCN (Cluster Coordinator Node)-assisted ICI (Inter-Cell Interference) avoidance methods exploit the CCN to control the interference in HetNet comprising of an MeNB (Macro enhanced Node-B) and a large number of small cells. A CCN which is located at the center of a number of small cells serves to avoid the interference between macro cell and small cells. We propose methods of resource allocation to avoid ICI for user equipments within the CCN coverage, and evaluate their performance through system-level computer simulations.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.12
• /
• pp.271-279
• /
• 2019

In extreme environment regions, unmanned rovers equipped with various sensors and devices are being developed for long-term exploration on behalf of humans. On the other hand, due to the harsh weather conditions and rough terrain, the rover camera has limited visible distance and field of view. Therefore, the rover cameras should be located for safe navigation and efficient terrain mapping. In this regard, to minimize the cost and time to manufacture the camera system on a rover, the simulation method using the rover design is presented to optimize the camera locations on the rover efficiently. In the simulation, a simulated terrain was taken from cameras with different locations and angles. The visible distance and overlapped extent of camera images, and terrain data accuracy calculated from the simulation were compared to determine the optimal locations of the rover's cameras. The simulated results will be used to manufacture a rover and camera system. In addition, self and system calibrations will be conducted to calculate the accurate position of the camera system on the rover.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.7 no.3
• /
• pp.43-54
• /
• 1997

Knowledge acquisition is one of the most difficult problems in designing fuzzy systems. As application domains of fuzzy systems become larger and more complex, it is more difficult to find the relations among the system's input- outpiit variables. Moreover, it takes a lot of efforts to formulate expert's knowledge about complex systems' control actions by linguistic variables. Another difficulty is to define and adjust membership functions properly. Soin conventional fuzzy systems, the membership functions should be adjusted to improve the system performance. This is time-consuming process. In this paper, we suggest a new approach to design a fuzzy system. We design a fuzzy system using two neural networks, Kohonen neural network and backpropagation neural network, which generate fuzzy rules automatically and construct inference network. Since fuzzy inference is performed based on fuzzy relation in this approach, we don't need the membership functions of each variable. Therefore it is unnecessary to define and adjust membership functions and we can get fuzzy rules automatically. The design process of fuzzy system becomes simple. The proposed approach is applied to a simulated automatic car speed control system. We can be sure that this approach not only makes the design process of fuzzy systems simple but also produces appropriate inference results.

• Journal of the Korean Society of Radiology
• /
• v.11 no.3
• /
• pp.161-169
• /
• 2017

The cone beam computed tomography(CBCT) which can acquire 3-dimensions images is widely used for confirmation of patient position before radiation therapy. In this study, through the simulation using the Monte Carlo technique, we will analyze the exposure dose by cone beam computed tomography and present the standardized data. For the experiment, MCNPX(ver. 2.5.0) was used and the photon beam spectrum was analyzed after Cone beam was simulated. As a result of analyzing the photon beam spectrum, the average energy ranged from 25.7 to 37.6 keV at the tube voltage of 80 ~ 120 kVp and the characteristic X-ray energy was 9, 60, 68 and 70 keV. As a result of using the water phantom, the percentage depth dose was measured, and the maximum dose appeared on the surface and decreased with depth. The absorbed dose also decreased as the depth increased. The absorbed dose of the whole phantom was 9.7 ~ 18.7 mGy. This is a dose which accounts for 0.2% of about 10 Gy, which is generally used for radiation therapy per week, which is not expected to have a significant effect on the treatment effect. However, it should not be overlooked even if it is small compared with prescription dose.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.961-965
• /
• 2007

현재 오염총량관리제를 시 군 단위의 기초자치 단체별로 시행하고 있는데 실제로 오염물질의 전달은 행정구역단위가 아닌 유역내에서 이루어지진다. 따라서 본 연구에서는 기초자치 단체별이 아닌 유역단위로 오염부하량과 삭감량을 산정함으로써 유역 단위의 오염총량관리제 계획 수립을 위한 토대를 제공하고자 한다. 본 연구에서는 보청천 유역을 대상으로 유역의 오염부하량을 산정하고자 하였다. 이를 위하여 지리정보시스템(GIS)인 WMS(Watershed Management System)와 ArcView를 이용하여 유역의 지형인자들을 추출하고, 각 소하천의 토지이용도와 생활계, 축산계, 양식계, 토지계를 바탕으로 원단위를 적용하여 발생부하량을 산정하였다. 그리고 각 소하천별 발생부하량 산정 결과를 토대로 각 수질관측점을 기준으로 하여 배출부하량을 산정하였으며, 배출부하량의 산정결과를 이용하여 유달부하량을 산정하였다. 이를 위해서 필요한 수질 데이터는 QUAL2E 모형을 이용하여 모의 하였으며, 수리 및 수질 매개변수를 추정하고 모형의 보정 및 검증을 수행하였다. 그 결과 유달부하량은 BOD는 2013.16kg/일, TN은 1091.34kg/일, TP은 235.16kg/일이 도출되었다. 따라서 장래에 수질이 악화될 경우를 고려하여 수질 항목별 오염량이 2배, 3배로 증가한다고 가정하였다. 오염량이 2배 증가하였을 경우, 오염부하량을 산정한 결과 보청천3 지점에서 BOD는 184.68kg/일이 삭감되어야 하고, 오염량이 3배 증가하였을 경우 BOD는 1775.69kg/일이 삭감되어야 한다는 결과를 도출할 수 있었다. 본 연구와 같이 유역단위로 오염부하량을 산정할 경우, 오염원을 줄이는데 효율적일 것으로 생각되며, 향후 오염총량관리제를 위해 유역단위의 오염부하량 산정을 고려하면 좋을 것으로 사료된다.는 지배적인 요인으로 남게 될 것이다. 본 연구에서는 현재 진행중인 승기천 오염하천 정화사업이 종료되는 시점을 기준으로 남동유수지에 대해 승기천과 연계한 유수지의 환경개선 방법을 제안하였다. 준설을 통해 유수지의 근본적인 오염원을 제거하고 남동유수지 유입부에 인공습지와 수처리설비를 설치하여 유수지의 수질을 개선하고 개선된 수질이 3급수로 유지하도록 하였으며, 설치된 인공습지에는 철새도래지를 조성하여 유수지 유입수인 철새가 날아드는 하천인 승기천의 테마와 연계하도록 하였다. 인공습지 주변으로 식생호안을 설치하고 유수지 주변에는 산책로를 설치하여 지역주민들의 친환경 수변공간으로 활용하도록 하였다. 1유수지와 연결된 2유수지는 BTL사업을 통해 주변공단으로부터의 오폐수를 원천적으로 차단하도록 하였으며 2유수지를 매립하여 지하는 강우시 유출수 저류가 가능한 화물차주차장으로 활용하고 지상은 녹지공간으로 조성하여 공단근로자 및 지역주민을 위한 휴식공간으로 활용될 수 있도록 제안하였다. 본 연구는 남동유수지 환경 개선 사업 실행을 위한 정책 연구로 연구결과를 인천시가 적극 수용하기로 결정함에 따라 인천시의 환경 현안 문제인 남동유수지의 수질개선을 통해 시민의 휴식 및 여가선용 공간으로 활용하기 위한 사업의 기초자료로 활용되며 이미 설계검토가 시작되었다. 본 연구결과는 유수지 및 저수지의 환경개선 사업의 선두적인 성공사례로 국내 타 지역의 유사한 사업에 있어 벤치마킹을 할 수 있는 훌륭한 사례가 될 것이다.요 생산이 증가하자 군신의 변별(辨別)과 사치를 이유로 강력하게 규제하여 백자의 확대와 발전에 걸림돌이 되었다. 둘째, 동기(銅器)의 대체품으로 자기를 만들어 충당해야할 강제성 당위성 상실로 인한 자기수요 감소를 초래하였을 것으로 사료된다. 셋째, 경기도 광주에서 백자관요가 운영되었으므로 지방인 상주

• Journal of Korea Water Resources Association
• /
• v.43 no.2
• /
• pp.211-220
• /
• 2010

The objective of this paper presents the application of an "integrated urban flood modeling-runoff model, urban flood model and sewer system model-" in a highly urbanized area of Samcheok where is seriously inundated in 2002 and 2003. For this, we demonstrate how couple a 1-D hydrodynamic model of the river, a 2-D hydrodynamic model of the overland (surface) flow, and a sewer network model including each boundary conditions. In order to make data file for the model, topographic information like elevation and share rate of buildings are directly extracted from DEM or topographical source data without data exchange to avoid uncertainty errors. Furthermore, the research is to assess the impacts of Manning n and buildings influences to inundated depth by changing its share ratio from 10 % to 30 % in low-land urban area. As a results, we found out that the urban inundated depth was decreased by Manning n but increased by buildings ratio. The calculated results of inundation was similar with observed one in 2002 and 2003 flooding. Furthermore, the area was also inundated under not riverbank break case in 2002 flooding.

• Journal of Korea Water Resources Association
• /
• v.51 no.4
• /
• pp.301-311
• /
• 2018

Recently, the flood inundation caused by heavy rainfall in urban area is increasing due to global warming. The variability of climate change is described in the IPCC 5th report (2014). The precipitation pattern and hydrological system is varied by climate change. Since the heavy rainfall surpassed the design capacity of the pipeline, it caused great damage in metropolitan cities such as Seoul and Busan. Inundation in urban area is primarily caused by insufficient sewer capacity and surplus overflow of river. Inundation in urban area with concentrated population is more dangerous than rural and mountains areas, because it is accompanied by human casualties as well as socio-economic damage to recover destruction of roads, brides and underground spaces. In addition, various factors such as an increase in impervious area, a short time of concentration to outlet, and a shortage of sewer capacity's lack increase flooding damage. In this study, flood inundation analysis was conducted for vulnerable areas using XP-SWMM. Also, three structural flood prevention measures such as drainage pipeline construction, detention reservoir construction, and flood pumping station construction are applied as flood damage prevention alternatives. The flood data for each alternative were extracted by dividing the basin by grid. The Spatial Compromise Programming are applied using flood assessment criteria, such as maximum inundation depth, inundation time, and construction cost. The purpose of this study is to reflect the preference of alternatives according to geographical condition even in the same watershed and to select flood defense alternative considering regional characteristics.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.11A
• /
• pp.1027-1034
• /
• 2005

IEEE802.15.4a, which is started to realize the PHY layer including high precision ranging/positioning and low data rate communication functions, requires a simple and low power consumable transceiver architecture. To satisfy this requirements, the simple noncoherent on-off keying (OOK) UWB transceiver with the parallel energy window banks (PEWB) giving high precision signal processing interface is proposed. The flexibility of the proposed system in multipath fading channel environments is acquired with the pulse and bit repetition method. To analyze the bit error rate (BER) performance of this proposed system, a noise model in receiver is derived with commonly used random variable distribution, chi-square. BER of $10^{-5}$ under the line-of-sight (LOS) residential channel is achieved with the integration time of 32 ns and signal to noise ratio (SNR) of 15.3 dB. For the non-line-of-sight (NLOS) outdoor channel, the integration time of 72 ns and SNR of 16.2 dB are needed. The integrated energy to total received energy (IRR) for the best BER performance is about $86\%$.