• Journal of the Korean Geotechnical Society
• /
• 제27권10호
• /
• pp.35-43
• /
• 2011

The area to be studied is the place where the main line rail way will be constructed in accordance with the scheduled construction project of Yeongju dam, and is a fold and mylonite zone over several km that is formed by ductile-shearing effect. The ductile shear zone, which has been transformed by faulting for long geological time, shows a complicated geological structure. Due to the recrystallization of mineral caused by transformation in deep underground (>8km), a mylonite zone with lamellar structure has properties distinguished from other fault zones formed by transformation near earth surface <2km). To see the properties of mylonite, this study analyzed the transformation rate of sample rocks and the shape of constriction structure accompanied with transformation. While the transformation of fault zone shows a round oblate, the mylonite zone shows a prolate form. Transformation rate in fault zone was measured to be less than 1.2 compared to the state before transformation while the measured rate in mylonite zone was 2.5 at most. Setting the surface of discontinuity as the base, the unconfined compressive strength of slickenside can be categorized in sedimentary rocks, and a change of strength was observed after water soaking over certain time. Taking into account that the weathering resistance of the rock based on mineral and chemical organization is relatively higher, its engineering properties seems to result from the shattered crack structure by crushing effect. When undertaking tunnel construction in mylonite zone, there should be a special care for the expansion of shattered cracks or the fall of strength by influx of ground water.

• Journal of Science Education
• /
• 제36권2호
• /
• pp.369-380
• /
• 2012

The purpose of this study was to investigate middle students' conceptions of buoyancy. The questionnaires composed of 9 items which asked the reasons for situations with buoyancy; recognized of buoyancy, the facts affecting buoyancy(bottom of the Area of the object, the shape of the object, the depth of the object in the water, amount of water, the degree of the object submerged in the water, volume of the object, weigh of the object), the relationship between the amount of replaced fluid and buoyancy. The subjects were 140 students from the Busan Area who answered questionnaires composed of 9 items which asked the reasons for situations with buoyancy. Among the 140, 132 students were selected who answered all of question in the test. The students' answer types were follow: 1. Related to the shape of the submerged object, students answered that buoynacy depended on the bottom dimensions or the surface area of the object. 2. Students confused press, water press and buoyancy, who answered buoyancy was great when the water press was great. 3. Students answered that the weight and the size of the buoyancy of the object was same in the water. 4. Students answered, gravity was smaller in the water. Students recognized the existence of buoyancy but the reason of the answer depend on their experience. Also students answered using the words that water pressure, pressure, force instead of buoyancy. Students didn't understand the factors affecting the buoyancy. Many students responded that buoyancy was changed depend on weight of object, sinking depth, shape and others. It was considered that these responses didn't understand the cause of buoyancy.

• Korean Chemical Engineering Research
• /
• 제43권4호
• /
• pp.495-502
• /
• 2005

Copper was plated on the tungsten substrate by use of a direct copper electroless plating. The optimum deposition conditions were found to be with a concentration of $CuSO_4$ 7.615 g/L, EDTA of 10.258 g/L, and glyoxylic acid of 7 g/L, respectively. The solution temperature was maintained at $60^{\circ}C$. The pH was varied from 11.0 to 12.8. After the deposition, the properties of the copper film were investigated with X-ray diffractometer (XRD), Field emission secondary electron microscope (FESEM), Atomic force microscope (AFM), X-ray photoelectron spectroscope (XPS), and Rutherford backscattering spectroscope (RBS). The best deposition condition was founded to be the solution pH of 11.8. In the case of 10 min deposition at the pH of 11.8, the grain shape was spherical, Cu phase was pure without impurity peak ($Cu_2O$ peak), and the surface root mean square roughness was about 11 nm. The thickness of the film turned out to be 140 nm after deposition for 12 min and the deposition rate was found to be about 12 nm/min. Increase in pH induced a formation of $Cu_2O$ phase with a long rectangular grain shape. The pH control seems to play an important role for the orientation of Cu in electroless deposition. The deposited copper concentration was 99 atomic percent according to RBS. The resulting Cu/W film yielded a good adhesive strength, because Cu/W alloy forms during electroless deposition.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• 제55권3호
• /
• pp.253-258
• /
• 2010

In this study, a total of 25 lines consisting of five native ginseng collections from Poonggi area, five lines from Geumsam area and 15 varieties were analyzed and clustered for the selection of Poonggi native ginseng in Korea using DNA markers. The results indicated that the long cluster distance were observed between the collections of 331002, 331004, 331005, 331007 and 331026 from Poonggi area, and the collections of 332009, 332021, 332046, 332050 and 332066 from Geumsan area because of the sensible differences on the number of leaves per stem, stem color and petiole color. Thus, the collections from Poonggi area with specific characters consisting of one stem per plant, five leaves per stem and broad elliptic leaflet shape were finely classified using nine primers including OPD05, OPD20, OPG17, OPH05 and so on. In this study, the collection of 331007 from Poonggi area was considered as the respective collection with above characters. Thus, the nine primers such as OPD05 and so on, will be used to select the Poonggi ginseng in the future studies.

• Journal of the Korean Orthopaedic Association
• /
• 제54권3호
• /
• pp.237-243
• /
• 2019

Purpose: To analyze the risk factors for posterior migration of a single cage after transforminal lumbar interbody fusion (TLIF). Materials and Methods: This study was conducted retrospectively on 48 patients (60 discs) who were followed-up for 1 year after TLIF from January 2015 to January 2017. The patients were divided into two groups: group 1 containing 16 patients (17 discs) with cage migration and group 2 containing 32 patients (43 discs) without it. Information related to cage migration, such as the demographic factors, shape of disc, level and location of the cage inserted, and disc height change, was acquired from the medical records and radiologic images, and the possibility for generating posterior migration of cage was evaluated statistically. Results: The demographic factors and cage-inserted level were similar in the two groups (16 patients in group 1, 32 patients in group 2). In the migration group, number of patients with a pear-type disc, 9 patients, was significantly larger; the disc height change, 1.8 mm, was significantly smaller; and the cage was located frequently on non-center in the anteriorposterior view and center in the lateral view in 9 and 15 out of 16 patients, respectively. Conclusion: A pear-type disc shape, small disc height change, cage with non-center on the anteriorposterior view and non-anterior on the lateral view are the risk factors for posterior migration. These factors are important for preventing posterior migration of the cage.

• The Korean Journal of Nuclear Medicine
• /
• 제31권4호
• /
• pp.452-458
• /
• 1997

To evaluate the pinhole scintigraphic findings and its significance, authors retrospectively compared the pinhole bone scintigrams and corresponding radiograms of 16 lesions in 14 patients with fibrous dysplasia. They were diagnosed pathologically in 10 lesions and radiologically in 6 lesions. The mean age of patients was 41.1 years. The mean interval between two studies was 1.1 days. Locations were ribs 7, pelvic bone 4, clavicle 1, long bones 4(femur 2, tibia 1, humerus 1). The radiographic findings were as follows : the central portions were radiolucent(n=9), ground-glass opacities(n=5) or sclerotic(n=2) and the peripheral appearance were sclerotic rim(n=5), septation(n=7), cortical perforation (n=10) and invisible cortical thinning(n=9). Pinhole scintigraphic findings were as follows; Central portions showed normal 1+ uptake in 6 cases(radiolucent 5, ground-glass opacity 1), slightly increased 2+ upta- ke in 7 cases(radiolucent 4, ground-glass opacity 3), and marked 3+ uptake in 3 cases(ground-glass opacity 1, sclerotic 2). The 15 of 16 lesions showed more intense uptake in the peripheral portion: slightly increased 2+ uptake corresponding to the sclerotic rim(5/5) and unvisible cortical thinning(1/9), and irregular foci of marked 3 + uptake corresponding to septation(7/7), cortical perforation(10/10) and invisible cortical thinning (8/9). One of 16 lesions showed homogeneous 2+ uptake. In conclusion, pinhole scintigram provides information on regional activity of the fibrous dysplasia, which would be helpful in diagnosis, prediction of prognosis and determination of treatment plan.

• Journal of Life Science
• /
• 제26권8호
• /
• pp.875-880
• /
• 2016

The plasma membrane plays a crucial role in relaying signals from the outside environment to the inside of the cells. In eukaryotic cells, the inner leaflets of the plasma membrane are composed mostly of phospholipids, including phosphatidylethanolamine (PE), phosphatidylserine (PS), and phosphatidylinositides (PIs). In this study, we tried to analyze the morphological changes induced by EGFP-fused membrane binding proteins, which are targeted to the plasma membrane via specific phospholipids binding. As a result, we found that overexpression of EGFP-P4M-SidM, a specific PI4P binding protein, or EGFP alone, did not induce any morphological changes. On the other hand, overexpression of EGFP-PLCδ1(PH), which is a specific PI(4,5)P₂ binding protein, EGFP-AKT1(PH) which binds to PI(3,4,5)P₃, or EGFP-OSH2(PH)×2 which binds to PI4P and PI(4,5)P₂, could induce the filopodia and lamilapodia formation as well as cell shrinkage. Overexpression of Lact-C2-EGFP which is a specific PS-binding probe, EGFP fused Aplysia phosphodiesterase 4 (ApPDE4) long-form (L(N20)-EGFP) which is localized to the plasma membrane via hydrophobic interaction, or EGFP fused Aplysia PDE4 short-form (S(N-UCR1-2)-EGFP) which is localized to the plasma membrane via electrostatic interaction, could induce cell shrinkage, but not filopodia or lamilapodia formation. Taken together, our data support that the different phospholipid bindings in the plasma membrane could induce different characteristic morphological changes. Thus, we can analyze, characterize, and classify the cellular morphological changes induced by the various phospholipid binding proteins.

• Korean Journal of Plant Taxonomy
• /
• 제43권4호
• /
• pp.300-311
• /
• 2013

Subalpine species, Sorbus pohuashanensis in the Korean peninsula, which is assumed to be evolved from hybridization between S. commixta and an unknown species based on the flavonoids data. Morphometric analysis was conducted on the basis of 19 leaf and flower (or fruit) characters. A total of 721 samples in 13 populations of Sorbus pohuashanensis and S. commixta from Korea and additional specimens of S. commixta, S. pohuashanensis, and S. wilsoniana from Japan and China were examined to reveal the hybridization patterns and morphological differences. We found a preliminary evidence where Korean mountain rowan is more related to a Chinese inland taxon, S. wilsoniana, rather than Northeastern Chinese S. pohuashanensis in terms of flavonoids. The current morphological structure of the Korean mountaion rowan, however, which is more similar to S. commixta, was neither associated with that of S. wilsoniana nor that of S. pohuashanensis. This indicates that this morphological variation represents an intermediate of S. commixta and S. wilsoniana via a more ancient hybridization event in terms of qualitative characters, such as stipules, buds, and carpels. These morphometric differences together with other distinguishing characteristics suggest that the Korean mountain rowan should be considered as a conspecific species of S. commixta, although this demonstration of hybridization with the current phenetic species concept contradicts longstanding historical species concept.

• Fire Science and Engineering
• /
• 제25권6호
• /
• pp.83-88
• /
• 2011

This study presented the structure and characteristics of vinyl cords used for wiring electric equipment and appliances and analyzed the photographs of damaged flat-type vinyl cords (VFF, $1.25mm^2$) and the metallic cross-sectional structure of melted conductors. Normal VFFs were made by twisting several strands together and the surface of the conductor was red brown. In addition, from the analysis of the metallic structure of the conductor, it was found that its grains had been elongated. The surface of a VFF damaged by normal flame showed no sheen with carbonized insulation material fused on the conductor surface. In addition, from the analysis of the cross-sectional structure of the melted area, it was found that voids of a certain shape were formed on it but that the cord's own elongation structure could not be checked. The cross-sectional analysis of the melted conductor damaged by the external flame applied to a VFF to which electric current was being applied showed no elongation structure for each cord, and revealed that irregular voids and a columnar structure had grown. The surface of the VFF damaged by overcurrent was uniformly carbonized and the cross-sectional structure analysis of the melted conductor revealed that the dendritic structure had grown. The analysis of the characteristics of the VFF melted by short-circuit showed that even though some part of the surface was contaminated, it showed little sheen and that the area rebounded by melting was round in shape. In addition, the cross-sectional structure analysis using a metallurgical microscope showed the boundary surface and columnar structure and revealed an amorphous structure like normal copper at areas other than the melted conductor.

• Proceedings of the Korea Water Resources Association Conference
• /
• 한국수자원학회 2022년도 학술발표회
• /
• pp.274-274
• /
• 2022

확률론적 지진해일 재해도 평가(PTHA)는 최근 지진해일에 대한 연구에서는 관심을 많이 받고 있는 주제로 여러 국가에서 연구가 진행되고 있다. 단층매개변수의 민감도 분석은 일본(Goda et al., 2014), 미국(Sepúlveda and Liu, 2016), 뉴질랜드(D. Burbridge et al., 2015) 등에서 연구가 활발하게 이루어졌으며 현재도 활발한 연구가 진행되고 있다. 민감도 분석은 PTHA를 진행하기 위한 선행 과정으로 파향선 추적을 통한 대상지 설정 및 연구 대상 단층을 선정한 후 로직트리를 만들기 위해 각 단층 매개변수의 범위와 단위 폭을 제시한다. 해당 연구는 세 가지 단층 매개변수에 대한 지진해일 초기파와 파고에 대한 민감도 분석을 실행했다. 주향각은 초기파와 지진해일고에 대해서 임의의 변동을 보이지만 변동 폭은 다른 두 매개변수들과 비교하여 가장 크다. 경사각과 슬립각은 단층의 수직 움직임을 변화시키며 이를 통해 초기파의 변동을 예측할 수 있다. 초기파의 변동과 모양을 분석함으로써 수치 계산이 가설과 유사한 결과를 보임을 확인하였다. 경사각과 슬립각에 의한 지진해일고의 변화는 최저 지진해일고가 초기파의 총 에너지와 연관된다는 결론에 이른다. 지진해일 재해도는 해안지역에 도달하는 최종 파고와 관련이 있으므로 각 매개변수의 단위 폭은 지진해일고의 결과를 통해 선정되었다. 민감도 분석은 제시한 주향각, 경사각, 슬립각의 단위 폭을 이용하여 로직트리의 분기 수를 감소시켜 수치 계산 시간을 줄임으로써 PTHA의 효율성을 증대시킨다.