• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.36-36
• /
• 1999

한국중공업(주)에서 수행한 KSTAR 진공용기 시작품 제작이 완성됨에 따라 제작과 관련된 종합기술을 분석하여 보았다. KSTAR 진공용기 시작품(그림1)은 전체의 1/4섹터인 90도 부분으로서 NBI(Neutral Beam Injection) 포트를 포함하는 45도 섹터와 축소포트(Reduced Port)를 포함하는 45도 섹터를 각각 먼저 제작한 후 두 부분을 용접하여 최종 시작품을 완성하였다. 용접은 SMAW법과 GTAW법 등 두가지 방법을 사용하였으며, 초기 용접시는 용접 면적이 작기 때문에 GTAW법을 이용하였고, 마무리 용접과 같이 용접 면적이 넓고 거친 부분에는 SMAW법을 이용하여 용접하였다. 모든 용접이 완전통과 용접이기 때문에 구조적 안전 면에서 좋으나, 진공측면에서는 다소 미흡한 점이 있다. 시작품은 상하 대칭구조로서 원통부분, 원형부분, 원추부분, 너클부분 (그림2) 등으로 나뉘어 지며 이중 원형품은 금형을 이용하여 성형하였고, 나머지 부분은 굽힘가공 후 절단적업을 하였다. 진공용기 조립은 안쪽과 바깥쪽 내벽부터 용접한 후 폴로이달 리브를 용접하고 외벽을 용접한다. 수평포트와 수직포트를 위해 스터브를 용접한 후 미리 용접해둔 NBI 포트 및 축소포트를 부착시켰다. 용접부위의 누설시험을 위한 방법으로, 용접주위 표면에서 개구하고 있는 홈에 적색 침투액을 침투시켜 침투 후 이 액을 홈의 개구로부터 빨아 내어 용접부위 표면상태에서 실제의 홈의 폭보다 확대한 홈의 지시모양으로 나타내게 하여 누설여부를 알기 쉽게 하는 액체 침투 탐상법을 적용하였다. 지시모양의 크기가 5mm 이상인 부분에 대해서는 재용접을 하였다. 누설 시험으로 초음파 탐상시험이 본제품 제작시 수행되어야 한다. 완성된 시작품에 대해 3군데의 위치에서 각각의 부분들이 용접되기 전과 후에 치수를 각각 측정하여 비교하였다. 또한 포트들에 대해서도 용접 전후 치수를 각각 측정하였다. 이러한 측정은 줄자를 사용하여 측정하였으므로 차 후 3차원 정밀 측정이 수반되어야 한다. 이상과 같이 시작품 제작을 통하여 문제점을 파악하고 개선책을 마련함으로서 향 후 KSTASR 진공용기 본 제품 제작할 때 반영코자 한다.

• Journal of the Korean earth science society
• /
• v.28 no.6
• /
• pp.655-672
• /
• 2007

The purpose of this study was to investigate information sources and types of reasoning that non-astronomy major undergraduate students used to build their mental models on the mechanism of the Moon craters formation. In-depth interview was used to collect qualitative data, and the questions for the interview were developed through an analytical induction method. We interviewed four students individually by using Seidman's interview step. The findings revealed that the participants built nonscientific mental models, and yet they held a consistent explanatory framework. The students explained that the crater was made by the fall of a meteorite. They all suggested a similar shape of meteorite even though their drawings about the shape of craters and its related to variables were different from one another. The information sources that the participants used fur their explanatory frameworks were varied, i.e., daily experiences, subject knowledges, and intuition. In addition, they used causal reasoning, intuitional reasoning, knowledge based reasoning, and analogical reasoning.

• The Journal of the Korea Contents Association
• /
• v.10 no.3
• /
• pp.373-380
• /
• 2010

The purpose of this study was to evaluate the effects of recreational exercise on cognition, depression, dynamic balance and leg strength in elderly women. This study was nonequivalent control group pre-post test design. Subjects were divided into two group(exercise group=14, control group=13). Experimental group conducted recreational exercise program for eight-week. Cognition was assessed by K-WAIS(object assembly & digit symbol) and depression were assessed by questionnaire. Dynamic balance(DB) and leg strength(LS) were assessed by 244cm up & go and sit to stand respectively. The collected data analyzed by Wilcoxon singed rank test and Mann-Whitney U test. The exercise group significantly improved cognition(object assembly) and DB, but control group significantly reduced DB. DB in exercise group were significantly greater than in control group after eight-week. The program was effective on cognition and dynamic balance in elderly women.

• Journal of Korean Society of Forest Science
• /
• v.88 no.3
• /
• pp.309-319
• /
• 1999

This study was conducted to get forest scenic beauty management information toward forest working systems; characteristics in Larix forest stands. 35 different alternatives were simulated to visualize on basis of actual forest working methods. The options were illustrated as photos produced by computer software. Each alternatives were evaluated by 3 groups with total 593 respondents after reliability test. Visual preference evaluation was used 1 - 10 point rating scale. The ratings were scaled using SBE analysis program of RMRATE. To compare the relationship of visual preference and image scale, Spatial images of 13 thinning alternatives were measured by Semantic differential scale. In general, the respondents preferred refreshing and ordering forest stand after forest working to natural forest stand before forest working. Visual preference decreased with the increasing intensity of bare ground area and slash area in forest stand. And also, visual preference was high related to tree density, clear length of stem, and ground vegetation. Farm line of small clear cutting area was preferred straight line to curve line. Visual preferences were significant differences in certain socioeconomic variables of the respondents. Results indicate how to conduct forest working system for forest scenic beauty management.

• Journal of the Korean Vacuum Society
• /
• v.17 no.4
• /
• pp.341-345
• /
• 2008

The SiOC film of carbon centered system was prepared using bistrimethylsilylmethane and oxygen mixed precursor by the chemical vapor deposition. The chemical properties of the SiOC film were analyzed by the contact anlge and FTIR spectra. The dielectric constant of the deposited films decreased after annealing process, and the correlation between the increasing the BTMSM/$O_2$ flow rate ratio and the dielectric constant did not exist. However, the trend of increasing or decreasing of the dielectric constant repeated and there is the correlation ship between the dielectric constant and the Si-O-C bond in the range of $950{\sim}1200\;cm^{-1}$. The dielectric constant decreased between samples with the chemical shift. The lowest dielectric constant was 1.65 at the sample, which was observed the chemical shift.

• The Bulletin of The Korean Astronomical Society
• /
• v.36 no.1
• /
• pp.30.1-30.1
• /
• 2011

2010년 11월 05일부터 11월 29일 중 총 12일간 진천 소재 충북대학교 천문대의 60cm 반사망원경과 ST-8 CCD 카메라를 이용하여 BD And의 BVR CCD 측광 관측을 수행하여 처음으로 BVR 광도 곡선을 완성하였다. 또한, 극심시각 결정을 위한 측광관측이 레몬산 천문대 1m 반사 망원경과 충북대학교 천문대의 35cm 망원경으로 수행되었다. 우리의 관측을 통하여 모두 19개의 극심시각을 새로이 결정하였다. 새로운 관측은 이 별의 공전주기가 이전까지 알려진 0.4629일이 아니라 그 두 배인 0.9258일이며, 기산점도 반주기 바뀌어야 함을 보여준다. BD And의 광도요소를 $MinI=HJD2434962.8602+0.^d9258054E$으로 새롭게 개정하였다. 이 광도요소로 작성한 우리의 BVR 광도곡선은 제1식과 제2식의 깊이가 거의 비슷하며, 식바깥 부분에 잘 발달된 파형 모양을 보인다. 이는 BD And가 짧은 주기의 RS CVn형 식쌍성임을 나타내는 것이다. 우리의 극심시각을 포함한 총 130개의 극심시각에 대한 (O-C)도를 작성한 결과, BD And의 공전주기가 규칙적으로 변화하는 것을 발견하였다. 이 변화를 보이지 않는 제3천체에 의한 광시간 효과로 가정하여, 궤도이심율이 0.78이며, 9.19년의 주기를 가진 광시간 궤도를 결정하였다. 우리의 광도곡선을 2003년 Wilson-Devinney 쌍성 모형으로 분석하여 광도곡선 해를 질량비 q=0.094, 궤도경사각 $i=85.^{\circ}4$, $T_1=6365(K)$, $T_2=6250(K)$, $R_1=1.132(Rsun)$, $R_2=1.304(Rsun)$와 같이 산출하였다. 식바깥에서 나타나는 파형 모양의 변화는 주성의 표면에 매우 큰 흑점으로 잘 설명되며, BVR 광도곡선에서 각전체 광도의 각 8.3%, 10.0%, 11.7%에 해당되는 제3 광도가 검출되었다. 이는 주기연구에서 제안된 제3천체의 존재 가능성을 더 공고히 한다.

• Applied Chemistry for Engineering
• /
• v.32 no.1
• /
• pp.91-96
• /
• 2021

This study was conducted to improve the operating conditions of an adsorption tower filled with potassium impregnated activated carbon for high hydrogen sulfide capture capacity. Heat treatment modified the surface properties of activated carbon, and ultimately determined its adsorption capacity. The activated carbon doped with potassium showed 57 times more adsorption at room temperature than that of using the raw adsorbent. It is believed that uniform pore formation and strong bonding of the potassium on the surface of carbon contributed to the chemical and physical absorption of hydrogen sulfide. The SEM analysis on the surface structure of various commercial carbons showed that the modification of surface properties through the heat treatment generated the destruction of pore structures resulted in the decrease of the absorption performance. The pressure drop across the activated carbon bed was closely related with the grain size and shape. The optimum size of irregularly shaped activated carbon granules was 2~4 mesh indicating economical feasibility.

• Analytical Science and Technology
• /
• v.22 no.3
• /
• pp.247-253
• /
• 2009

Porous silicon films are electrochemically etched from crystalline silicon wafers in an aqueous solution of hydrofluoric acid(HF). Careful control of etching conditions (current density, etch time, HF concentration) provides films with precise, reproducible physical parameters (morphology, porosity and thickness). The etched pattern could be varied due to (1) current density controls pore size (2) etching time determines depth and (3) complex layered structures can be made using different current profiles (square wave, triangle, sinusoidal etc.). The optical interference spectrum from Fabry-Perot layer has been used for forensic applications, where changes in the optical reflectivity spectrum confirm the identity. We will explore a method of identifying the specific pattern code and can be used for identities of individual code with porous silicon based encoded nanosized smart particles.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.1A
• /
• pp.229-236
• /
• 2006

Recently, the use of crushed sand produced by the crushing of stone is continuously increasing to reach an utilization rate of about 20% of the whole fine aggregates that is foreseen to grow larger in the future. However, the lack of recognition concerning quality during the production of crushed sand results in the use of crushed sand that do not satisfy the KS F 2527 standard during the manufacture of concrete. And, studies investigating the effects of such crushed sand on concrete are still neglected. Therefore, this study intends to provide data that can be exploited for concrete using crushed sand through the analysis of the effects of the grain shape of crushed sand on the quality of concrete. Results revealed problems in the workability, air entraining and durability for a value of 53% for the solid volume percentage for shape determination specified by the current KS F 2527. Analysis showed that the adjustment of the solid volume percentage for shape determination from the currently specified 53% to 55% will improve the quality of concrete using crushed sand in high strength concrete particularly.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.19 no.3
• /
• pp.589-602
• /
• 2024

Thermoelectric generator (TEG) generally do not have high heat conversion efficiencies. The performance of a thermoelectric generator module depends on the shape of the legs as well as the properties of the material and the number of legs. In this study, the leg shapes of thermoelectric elements are modeled into various geometric structures such as cylinder and cube shaped to efficiently harvest waste heat, and the electrical characteristics are compared numerically. The temperature gradient and power generation according to the bridge shape are found to be highest at the existing Cube shape. As a result of comparing the power generation using the cooling effect, the Cone shape was the highest in natural convection and the Hourglass shape was highest in forced convection. Research results confirm that geometry can affect the efficiency of thermoelectric generators.