• Journal of Korea Multimedia Society
• /
• v.6 no.7
• /
• pp.1189-1199
• /
• 2003

This paper presents a new method for the motion detection of vehicles using hierarchical motion estimation and parallel processing. It captures the road image by using a CMOS sensor. It divides the captured image into small blocks and detects the motion of each block by using a block-matching method which is based on a hierarchical motion estimation and parallel processing for the real-time processing. The parallelism is achieved by using tile pipeline and the data flow technique. The proposed method has been implemented by using an embedded system. The proposed block matching algorithm has been implemented on PLDs(Programmable Logic Device) and clustering algorithm has been implemented by ARM processor. Experimental results show that the proposed system detects the motion of vehicles in real-time.

• Journal of the Korea Computer Graphics Society
• /
• v.6 no.3
• /
• pp.9-15
• /
• 2000

We Propose a sensor fusion technique for motion capture system. In our system, two kinds of sensors are used for mutual assistance. Four magnetic sensors(markers) are attached on the upper arms and the back of the hands for assisting twelve optical sensors which are attached on the arms of a performer. The optical sensor information is not always complete because the optical markers can be hidden due to obstacles. In this case, magnetic sensor information is used to link discontinuous optical sensor information. We use a system identification techniques for modeling the relation between the sensors' signals. Dynamic systems are constructed from input-output data. We determine the best model from the set of candidate models using the canonical system identification techniques. Our approach is using a simple signal processing technique currently. In the future work, we will propose a new method using other signal processing techniques such as Wiener or Kalman filter.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.114-117
• /
• 2000

We developed a motion capture system to get angle data of human joints in walking mode. The data are used to coordinate the biped-walking robot developed in our laboratory. A pair of motion capture system is composed of three links with the ankle, knee, and pelvis joints. The system has six axes attached with potentiometers. We used an A/D converter was used to get digital data from joint angles. We filterd the data using the Butterworth 4th order digital filter, and simulated walking motion based on the data using the Matlab.

• The Journal of the Korea Contents Association
• /
• v.22 no.3
• /
• pp.593-605
• /
• 2022

The purpose of this study is to investigate the personalized treacmill exercise analysis using a smart mirror based on Kinect sensor. To evaluate the performance of the development system, 10 health males were used to measure the range of the hip joint, knee joint, and ankle joint using a smart mirror when walking on a treadmill. For the validity and reliability of the development system, the validity and reliability were analyzed by comparing the human movement data measured by the Kinect sensor with the human movement data measured by the infrared motion capture device. As a result of validity verification, the correlation coefficient r=0.871~0.919 showed a high positive correlation, and through linear regression analysis, the validity of the smart mirror system was 88%. Reliability verification was conducted by ICC analysis. As a result of reliability verification, the correlation coefficient r=0.743~0.916 showed high correlation between subjects, and the consistency for repeated measurement was also very high at ICC=0.937. In conclusion, despite the disadvantage that Kinect sensor is less accurate than the motion capture system, Kinect is it has the advantage of low price and real-time information feedback. This means that the Kinect sensor is likely to be used as a tool for evaluating exercise prescription through human motion measurement and analysis.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.8 no.6
• /
• pp.111-117
• /
• 2008

In this paper, we describes the boxing motion recognition which is used in the part of games, animation. To recognize the boxing motion, we have used two algorithms, one is principle component analysis, the other is dynamic time warping algorithm. PCA is the simplest of the true eigenvector-based multivariate analyses and often used to reduce multidimensional data sets to lower dimensions for analysis. DTW is an algorithm for measuring similarity between two sequences which may vary in time or speed. We introduce and compare PCA and DTW algorithms respectively. We implemented the recognition of boxing motion on the motion capture system which is developed in out research, and depict the system also. The motion graph will be created by boxing motion data which is acquired from motion capture system, and will be normalized in a process. The result has implemented in the motion recognition system with five actors, and showed the performance of the recognition.

• 한국HCI학회:학술대회논문집
• /
• 2006.02a
• /
• pp.69-74
• /
• 2006

가상환경의 실시간 운동감을 제공하는 차량 시뮬레이터 기술에 있어, 그 현실성 제고를 위한 다양한 연구가 수행되어 왔으며, 최근에는 실제 대상의 운동감을 기록하고 이를 재생하는, 데이터기반 운동감 생성 시스템이 개발되었다. 이 방법은 실제 운동감을 제공하므로, 현실성 확보가 용이하나, 사용자와의 상호 작용이 없는 단순한 가상 컨텐츠의 제공 단계에 머물고 있다. 본 연구에서는, 컴퓨터 그래픽스 분야에서 활발히 연구되고 있는, 모션 캡쳐 데이터의 가공 및 합성 기술을 차량 시뮬레이터 구동 과정에 도입하여, 제어가 가능한, 실 데이터 기반 운동감을 생성하는, 새로운 방법을 제안하고자 한다. 이 방법은, 실제 차량의 운동데이터를 획득하고, 적절한 형태의 데이터 구조(운동감 조각)로 변환하여 데이터베이스에 저장하며, 실시간 시뮬레이션 시, 최적의 운동감 조각을 검색하고 합성하여 운동감 스트림을 제공하는 방법으로서, 현재의 시뮬레이션 상태 및 사용자의 요구 사항을 매개변수화 하여, 현실과 가장 가까운 운동감 생성방법을 제공한다. 또한, 차량 운동감 생성 시스템의 개발 및 모션 베이스 구동 실험을 통해, 제안한 방법에 의한 운동감의 현실성 제고 방안에 대해 소개하고자 한다.

• Proceedings of the KIEE Conference
• /
• 2006.10c
• /
• pp.582-584
• /
• 2006

This paper describes a monocular PSD-based motion capture sensor to employ with commercial video game systems such as Microsoft's XBOX and Sony's Playstation II. The system compact, low-cost, and only requires a one-time calibration at the factory. The system includes a PSD(Position Sensitive Detector) and active infrared (IR) LED markers that are placed on the object to be tracked. The PSD sensor is placed in the focal plane of a wide-angle lens. The micro-controller calculates the 3D position of the markers using only the measured intensity and 2D position on the PSD. A series of experiments were performed to evaluate the performance of our prototype system. From the experimental results we see that the proposed system's compact size, low-cost, ease of installation, and high frame rates are suitable for high speed motion tracking in games.

• Proceedings of the KIEE Conference
• /
• 2005.10b
• /
• pp.603-605
• /
• 2005

In this paper, we deal with a calibration method for low cost motion capture sensor using PSD (Position Sensitive Detection). The PSD sensor is employed to measure the direction of incident light from moving markers attached to motion body. To calibrate the PSD optical module, a conventional camera calibration algorithm introduced by Tsai. The 3-dimensional positions of the markers are measured by using stereo camera geometry. From the experimental results, the low cost motion capture sensor can be used in a real time system.

• Proceedings of the IEEK Conference
• /
• 2002.06c
• /
• pp.199-202
• /
• 2002

We described a real-time 3D computer vision system called MIMIC(Motion interface f Motion information Capture system) that can capture and save motion of an actor. This system analyzes input images from vision sensors and searches feature information like a head, hands, and feet. Moreover, this estimates intermediated joints as an elbow and hee using feature information and makes 3D human model having 20 joints. This virtual human model mimics the motion of an actor in real-time. Therefore this system can realize the movement of an actor unaffectedly because of making intermediated joint for complete human body contrary to other marker-free motion capture system.

• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.11
• /
• pp.1074-1080
• /
• 2006

Motion capture systems are gaining popularity in entertainment, medicine, sports, education, and industry, with animation and gaming applications for entertainment taking the lead. A wide variety of systems are available for motion capture, but most of them are complicated and expensive. In the general class of optical motion capture, two or more optical sensors are needed to measure the 3D positions of the markers attached to the body. Recently, a 3D motion capture system using two Position Sensitive Detector (PSD) optical sensors was introduced to capture high-speed motion of an active infrared LED marker. The PSD-based system, however, is limited by a geometric calibration procedure for two PSD sensor modules that is too difficult for common customers. In this research, we have introduced a new system that used a single PSD sensor unit to obtain 3D positions of active IR LED-based markers. This new system is easy to calibrate and inexpensive.