• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.6
• /
• pp.1296-1301
• /
• 2006

The human eye is exposed to UV and visible light. UV light exposure becomes harmful to the eye. Protection for eyes should block all ultraviolet rays. In our study, organic-inorganic hybrid materials have been applied to UV blocking coatings with UV absorbing materials on transparent plastics. The optical properties of UV blocking coatings were investigated in PMMA, CR 39 and PC substrates. In case of all UV absorbers, the transmission of UV light decreases with an increased amount of absorber. Our findings indicate that PMMA significantly reduced the transmission of UV radiation, CR 39 showed moderate decrease, while UV-uncoated PC had some UV blocking properties. Adhesion, hot water resistance and chemical resistance of the UV-coated CR 39 lenses were good. Pencil hardness were 4H. Abrasion resistance were poor.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.247-247
• /
• 2010

DLC(diamond-like carbon)는 비정질 고상 탄소의 하나로 다이아몬드의 유사한 높은 경도, 내마모성, 윤활성, 전기절연성, 화학적 안정성을 가지고 있는 재료이다. 이러한 우수한 특성 때문에 DLC는 박막의 형태로 여러 종류의 보호코팅에 많이 응용되고 있다. DLC의 광범위한 응용에 있어 가장 큰 문제점은 박막이 갖는 높은 잔류응력과 이에 따른 기판과의 낮은 접착성으로 알려져 있다. 최근 연구에 의하면, plasma pre-treatment를 통해 PTFE기판에 DLC박막의 adhesion strength를 증진 시킬 수 있다고 보고하였다. 또한 ion beam technique를 이용하여 잔류응력을 줄이고 기판과의 접착력을 높일 수 있다는 것도 보고 되었다. 이에 기인하여 pre-treatment가 DLC합성에 잔류응력을 낮추고 기판과의 접착성을 높이는 효과를 보일 것이라고 가정하고 연구하였다. 본 연구에서 pre-treatment가 Diamond-like Carbon의 stainless steel 합성시 stress와 adhesion에 어떤 효과가 있는지 알아보기 위해, pre-treatment시와 synthesis of DLC film시에 13.56MHz 150W RF플라즈마 화학기상 증착 (RF-PECVD) 법을 통해 합성되었다. pre-treatment시에 H2(80 sccm), O2(10 sccm), N2(20 sccm)의 가스 종류를 다르게 하였고, synthesis of DLC film시에는 CH4 (20 sccm), H2 (80 sccm)가스의 유량을 고정하였다. 합성된 DLC 박막은 Contact Angle Analyze, Raman spectroscopy, Scratch tester를 이용하여 접촉각, D peak Position, G peak Position, ID/IG ratio, 접착력을 측정하였다.

• Journal of Korean Ophthalmic Optics Society
• /
• v.10 no.1
• /
• pp.27-34
• /
• 2005

Photochromic lens is the color changing lens from colorlessness to colorness when exposed to UV light. It can protect eyes from UV-B light which cause the cataract and can be used as sunglass in the summer since it can cut off 70~80% of sun light. Surface coating technique was used to develop lens which has 70% light transmittance and of which fading time of color change is within 5 min. Various color lenses were developed so that these had various color such as blue, green, brown, violet, yellow and red etc. Lens has an excellent physical properties, 100% adhesion and 4~5H hardness. The chemical and the scratch resistance of this lens were the greatest and the thermal stability was also higher. The clinical trial of developed lens were applied to 65 patients who had photophobia by various reasons at ophthalmology of Soonchunhyang University Hospital. Results showed that glaring was significantly reduced and the visual health were remarkably improved. Especially, anti-glaring effect in the night was great for the patient who had the LASIK operation. Protection of UV-B and blue light also can prevent the patient from cataract and the yellowish crystalline lens at old ages. Through the result of clinical. trial, we know that photochromic lens could be a new technique for both cure and precaution of photophobia.

• Korean journal of communication and information
• /
• v.84
• /
• pp.99-123
• /
• 2017

We analyzed the movie (2016/ directed by J-yong E), which is entangled in politics of gender, age, class, or sexuality, naming as "spaces of Others", using the concepts of heterotopia of Foucault. Foucault addressed three types of spaces: the realistic space where we currently live, the unrealistic and non-existent utopia, and heterotopia, which functions antithetically to reality. Thus, Foucault's heterotopia can be considered to indicate "heterogeneous spaces" in reality. The Bacchus Lady revolves a 65-year old prostitute So-Young, sells her body to old men at the parks in downtown of Seoul. Old prostitute on streets are often referred as "Bacchus Ladies", because suggest the popular energy drink a bottle of Bacchus while selling sex. The movie represents some minorities such as transgender, Tina and madam of the club, G-spot, migrant women like Camila and Aindu, and a amputee, Dohoon. Through these people's bodies, the problems such as imperials, nations, ethnics, gender, age, class are entangled in the movie. The politics of these points work and construct heterotopias in four spaces of Others. First, the spaces which ageing and death are intersected. Second, the spaces of So-Young for prostitutes, Third, the spaces of So-Young's mothering: she adopted her baby to American when he was a infant, so she have felt guilty. Fourth, the spaces for So-young's quasi-family with Minho, a Kopian boy who was abandoned by Korean father, Dohoon, who is a poor amputee, and Tina, who is a transgender singer. Fifth, the spaces of speech of So-Young as the subaltern: the subaltern does not have the language to express its own experiences. In order to listen to the words of subaltern, we must do the task of measuring the silence. This cinematic representation of So-young as the subaltern makes her speak about her situation. Finally, the spaces constructed by the movie can be connected 'heterotopia of crisis', 'heterotopia of deviation' and 'heterotopia of fantasy'. The spaces of the movie represents lives of Others, nevertheless, So-Young's Otherness through spaces of heterotopia was transformed to an absolute Other by patriarchal traits of cinematic narrative.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.135-135
• /
• 2018

천이금속 질화물 코팅은 우수한 기계적 특성들로 인해 공구 코팅으로 많이 사용 되어왔다. 그 중에서도 특히 Cr계 경질 코팅은 높은 경도와 낮은 표면조도, 우수한 마찰특성 등 뛰어난 기계적 특성을 나타내므로 공구 코팅으로의 적용 가능성이 크다. 그러나 최근 공구산업의 발전으로 인해 공구가 더욱 가혹한 환경에서 사용됨에 따라, 공구의 수명을 향상시키고 보호하기 위해 코팅의 높은 밀착력이 요구되고 있으며, 모재와 코팅 사이에 중간층을 합성함으로써 공구의 밀착력을 향상시키는 연구가 활발히 진행되고 있다. 이전 연구에서 모재/중간층/코팅간의 경도와 탄성계수 비율(H/E ratio)의 구배가 코팅의 밀착력에 큰 영향을 미치는 것으로 확인되었다. 그러므로, WC 모재와 Cr계 코팅의 중간값의 H/E ratio를 갖는 중간층의 합성을 통해 코팅의 밀착력을 향상시킬 수 있을 것으로 판단된다. 본 연구에서는, 코팅의 밀착력을 향상시키기 위해 다양한 중간층을 증착한 CrZrN, CrAlN 코팅을 비대칭 마그네트론 스퍼터링 장비를 이용하여 합성하였다. 모재로는 디스크 형상의 WC-6wt.%Co 시편을 사용하였고 Cr, Zr, Si, Al single 타겟을 이용하여 Cr, CrN, CrZrN, CrZrSiN 등의 중간층이 증착된 코팅을 합성했다. 코팅의 합금상, 경도 및 탄성계수, 미세조직 및 조성, 표면 조도을 확인하기 위해 X-ray diffractometer (XRD), Fischer scope, field-emission scanning electron microscopy (FE-SEM), energy dispersive X-ray spectroscopy (EDS), atomic force microscopy를 사용하였고, 코팅의 밀착 특성을 분석하기 위해 scratch tester와 optical microscopy (OM)를 이용하였다. 코팅의 내열성을 확인하기 위해 코팅을 furnace에 넣어 공기중에서 500, 600, 700, 800, 900, $1,000^{\circ}C$로 30분 동안 annealing 한 후에 nano-indentation을 사용하여 경도를 측정하였다. CrZrN 및 CrAlN 코팅을 나노 인덴테이션으로 분석한 결과, 모든 코팅의 경도(33.4-35.8 GPa)와 탄성계수(384.1-391.4 GPa)는 중간층의 종류에 상관없이 비슷한 값을 보인 것으로 확인됐다. 그러나, 코팅의 마찰계수는 중간층의 종류에 따라 다른 값을 보였다. CrZrN 코팅의 경우 CrN 합금상 중간층을 갖을 때 가장 낮은 값을 보였으며, CrAlN 코팅의 경우 CrN/CrZrSiN 중간층을 증착하였을때 마찰계수는 0.34로 CrZrN 중간층을 증착하였을 때(0.41)에 비해 낮은 값을 보였다. 또한, 코팅의 마모율 및 마모폭도 비슷한 경향을 보인 것으로 보아, CrN/CrZrSiN 중간층을 합성한 CrAlN 코팅의 내마모성이 상대적으로 우수한 것으로 판단된다. 코팅의 밀착력의 경우도 마찰계수와 비슷한 경향을 보였다. 이것은 중간층의 H/E ratio가 코팅의 내마모성에 미치는 영향에 의한 결과로 사료된다. H/E ratio는 파단시의 최대 탄성 변형율로써, 모재/중간층/코팅의 H/E ratio 구배에 따라 코팅 내의 응력의 완화 정도가 변하게 된다. WC 모재 (H/E=0.040)와 CrAlN 코팅(H/E=0.089) 사이에서 CrN, CrZrSiN 중간층의 H/E ratio는 각각 0.076, 0.083으로 모재/중간층/코팅의 H/E ratio 구배가 점차 증가함을 확인 할 수 있었고, 일정 응력이 지속적으로 가해지면서 진행되는 마모시험중에 CrN과 CrZrSiN 중간층이 WC와 CrAlN 코팅 사이에서 코팅 내부의 응력구배를 완화시키는 역할을 함으로써 CrAlN 코팅의 내마모성이 향상된 것으로 판단된다. 모든 코팅을 열처리 후 경도 분석 결과, CrN/CrZrSiN 중간층을 증착한 CrAlN 코팅은 $1,000^{\circ}C$까지 약 28GPa의 높은 경도를 유지한 것으로 확인 되었고, 이는 CrZrSiN 중간층 내에 존재하는 SiNx 비정질상의 우수한 내산화성에 의한 결과로 판단된다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.12
• /
• pp.27-36
• /
• 2019

The demand for a low dispersion lens with a small refractive index and a high refractive index is increasing, and accordingly, there is an increasing need for a releasable protective film with high heat resistance and abrasion resistance. On the other hand, the optical industry has not yet established a clear standard for the manufacturing process and quality standards for mold-releasing protective films used in aspheric glass lens molding. Optical lens manufacturers treat this technology as proprietary information. In this study, an experiment was conducted regarding the optimization of ion etching, magnetron, and arc current at each source and filter part, and bias voltage in FCVA (filtered cathode vacuum arc)-based Ta-C thin film coatings. This study found that compared to iridium-rhenium alloy thin film sputtering products, the coating conditions were improved by approximately 50%, 20%, and 40% in terms of thickness, hardness, and adhesive strength of the film, respectively. The thin-film coating process proposed in this study is expected to contribute significantly to the development and utilization of glass lenses, which will help enhance the minimum mechanical properties and quality of the mold-release thin film layer required for glass mold surface forming technology.

• Journal of Adhesion and Interface
• /
• v.2 no.2
• /
• pp.20-27
• /
• 2001

Recently polycarbonate material has been utilized as windows in aircraft, buildings, and optical lens. However, while polycarbonate has excellent optical transparency, impact strength and many beneficial mechanical properties, it possesses poor abrasion resistance and weatherability. Then, there is a need for developing optically clear, anti-abrasive and weather resistant hard coating agents for polycarbonate. In this study, N-triethoxy silyl propyl quinine urethane(TESPQU) was synthesized with quinine and 3-isocyanato propyl triethoxy silane(3-IPTES). In order to introduce optically active silane in the main siloxane network, TESPQU was co-hydrolysed and co-condensed with methyl triethoxy silane(MTES) under acidic conditions. Polycarbonate sheets were coated with silica coating agents by the sol-gel method, and their abrasion resistance, ability of UV absorption and weatherability were evaluated. Coating agents containing hydroxybenzophenone as a UV absorber were also prepared to compare weatherability with TESPQU containing coating agent. TESPQU containing coating agent had good weatherability in accelerated QUV test.

• Journal of Ethics
• /
• no.77
• /
• pp.191-215
• /
• 2010

In dieser vorliegenden Arbeit wird die eigentliche Bedeutung des Hauses in bezug auf M. Heidegger, G. Bachelard und O. F. Bollnow analysiert. Bei Heidegger ist das Wohnen ein Wesensmerkmal des Menschen und das Haus ein Raum des Wohnens als das Pflegen und Schonen. Insbesondre Bachelard hat die schuetzend Funktion des Hauses und das Haus als das Glueck des Wohnens behauptet. Fuer Bollnow bedeutet das Haus eine Mitte des menschlichen Lebens und der Welt. Heidegger behauptet, dass wir so in der eigentlichen Not des Wohnens, d.h. in der Heimatlosigkieit sind. Wir muessen nach die Bedeutung des Hauses nicht als einen wirtschaftlichen Wert sondern als den eigentlichen Wohnraum denken und das Wohnen lernen. Bachelard weist darauf hin, dass das Haus als ein gluekliche Raum ein wesentliches Trauen voraussetzt. Und er versteht das Haus mit dem dialektischen Zusammenhang zwischen dem Haus und der Welt. Bollnow versucht ueber dem Raum in anthropologische Hinsicht zu betrachten. Er behauptet, dass der Mensch seine wesentlichen Bedeutung durch das Wohnen hat. Durch die Vermenschlichung des Raumes muss der Mensch die Verantwortlichkeit ueber den Raum uebernehmen. In der heutigen Gesellschaft bemessen das Haus sich nur mit einem wirtschaftlichen Wert. Wir muessen das Haus lesen, und die eigentliche Bedeutung des Hauses.

• Korean Journal of Social Welfare
• /
• v.36
• /
• pp.39-69
• /
• 1998

The study is to grope for the unified device of the women's welfare policy in the United Korea by considering and comparing with the women's welfare in South Korea and North Korea centering on the women's welfare law and system among the social security laws and systems in the present both countries. The both Koreas have enforced the different women's welfare policies according to the different ideologies and constitutions. But in the welfare policy women are in the secondary stage by means of the ideology of sexual devision. It, therefore, is clear that the position of the North Korean woman goes in advance of the South Korean woman in the law and system. However, they are similar to the North Korean women in the aspects of the application of law and system. That is, both of them are discriminated not only in home and labor participation, but also in social welfare. There are the patriarchal family system and sexual devision of labor under the discrimination against woman. As though the both sexes are equal in law, the welfare law and system are applicated unequally to woman because of the ideology of sexual devision and familism which family should take the primary responsibility of welfare. From this perspective the women's welfare policy of the United Korea is not just to unify both laws and systems related women's welfare, but to search for the convergence on the higher level of quality and to make the real gender-equal society. The study suggests as the women's welfare the spread of the application of social welfare system, and social security network constructed through the mother protection policy, women's poverty and social security on basis of the primary principles such as the gender equal right as civil right, benefits of social welfare as social right, escape from the patriarchal familism, strengthening of resposibility of state and the principle of women participation in process of social welfare management. The device of women's welfare means building the social welfare system based on the real gender equality, so the unification will be the important turning point for the gender-equal society to the South-North Korean women.

• Weed & Turfgrass Science
• /
• v.3 no.4
• /
• pp.329-335
• /
• 2014

This study was performed to study characteristics of new zoysiagarass cultivar 'Green Ever' (Plant Variety Protection Application no. 2014 - 02). 'Green Ever' was developed by selection breeding among 100 native zoysiagrasses collected in South Korea. 'Green Ever' showed specific bands (1.48 kb with OPC14 and 1.05 kb with OPD5) which were distinct from 'Anyang Joonggi' or 'Dongrae Koryogi' in RAPD analysis. 'Green Ever' was classified as Z. matrella in morphological evaluations including plant height ($6.8{\pm}0.5cm$), leaf width ($2.0{\pm}0.1mm$), height of lowest leaf ($1.9{\pm}0.1cm$) and seed length ($3.0{\pm}0.1mm$), which was similar with morphological characteristics of 'Dongrae Koryogi'. Turf quality, shoot density and chlorophyll content of 'Green Ever' were higher than them of 'Anyang Joonggi' and 'Dongrae Koryogi' under intensive management such as fairway on golf course, especially shoot densities of 'Green Ever' were excellent higher than 'Anyang Joonggi' and 'Dongrae Koryogi' during experimental periods. It could be extensively used in fairway, teeing ground of golf courses and landscape garden after further study about various environmental adaptabilities such as winter kill, wear tolerance etc.