• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.10
• /
• pp.1085-1093
• /
• 2010

This paper proposes a multiple filter for reduction of received signal fluctuation and enhancement of step altitude edge detection in FMCW radar altimeter. The proposed filter was composed of alpha-trimmed mean filter, frequency variation limiter, and 1/3 order static filter. Simulations by analysis of received signal show that the proposed filter provides better performance than moving average and standard median filters with error reduction. In particular, the proposed filter was improved in the ability of reducing fluctuation for ground hovering.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.65-67
• /
• 2015

In this paper, small WLAN antenna was designed and investigated. Proposed antenna was configured for microstrip patch antenna ($29mm{\times}29mm$) that was mounted on RF4 dielectric substrate (relative permittivity 4.4, thick 1.6mm, tangent loss 0.025) with $45mm{\times}45mm$. In order to obtain a wide band characteristic, the cutting process was 3.2mm diagonal corners of the patch antenna located on the top of the substrate. Antenna feeding position for 50 ohm impedance matching was decided to be 5.1mm at the central axis in the horizontal direction. As a result, frequency bandwidth satisfying the condition of VSWR<2dB was 2.365-2.45GHz (85MHz, 3.53%) for considering WLAN.

• Proceedings of the Korean Information Science Society Conference
• /
• 2005.07a
• /
• pp.598-600
• /
• 2005

본 논문은 MPEG-4 기반의 모바일 비디오 서비스 환경에서 발생하는 화질열화 현상의 하나인 블륵킹 현상을 제거하는 기법을 제안한다. 제안된 기법은 전처리 과정과 3가지 모드의 디블록킹 필터 및 후처리 과정으로 구성되어 있으며 각 모드는 블록경계의 특성에 따라 적용된다. 모드 1은 블록경계의 양쪽 모두가 평탄한 경우에 해당하며 가장 강한 필터를 적용한다. 모드 2는 블록경계의 한쪽만 평탄한 경우이고 이때는 비대칭 필터를 적용한다. 모드 3은 블록경계를 중심으로 양쪽 모두 복잡한 경우이고, 이 경우에는 블록경계의 주파수 특성을 고려하여 화소값을 보정한다. 전처리 과정에서는 각 필터의 모드를 올바르게 선택하도록 블록 내부의 불필요한 신호를 제거하고, 후처리 과정에서는 대각선 에지와 블록의 모서리가 만나는 경우 발생하는 corner outlier를 제거하여 주관적 화질을 향상시킨다. 실험결과에서 제안한 방법이 PSNR 관점에서 후처리 과정을 거치지 않는 비디오의 경우와 비교하여 약 0.7dB, MPEG-4 디블록킹 결과와 비교하여 약 0.4dB 향상됨을 보인다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.9 no.5
• /
• pp.678-686
• /
• 1998

This paper describes an anisotropic perfectly matched layer (APML) for mesh truncation of the Finite Difference Time Domain(FDTD) method. The APML method can classified by a split type and an unsplit type, in case of the split type be made up 12 equations or 8 equations largely, and in case of the unsplit type be made of 6 equations. Therefore the latter is more simple as compare with the former. For the APML method presented in this paper is the latter, is directly derived from the time domain equations of Maxwell and extend to the three dimensional problem for the method suggested by Chen. Especially, in the edge and corner parts except the planes, the APML method effectively treated as compound with the Chen's method and Gedney's method newly. The results of the numerical method in this paper show the radiation patterns and the time responses of electromagnetic fields of the wire antennas according to wavelengths and the APML results are compared with Mur's first order absorbing boundary condition and Kraus's analytical results. Eventually, Mur's first order condition have many errors at the edge and corner. On the other hand, in comparison with Kraus's analytical results, it is quite good agreement, and the validity of present method is confirmed.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.7
• /
• pp.769-777
• /
• 2010

In this paper, a switchable circularly polarized microstrip patch antenna using PIN diodes and corner slots on ground plane is proposed at 2.4 GHz. The proposed antenna has a square microstrip patch and ground plane that consists of two pair of slots and PIN diodes. The electrical lengths of the slots are adjusted by using the switching characteristic of the PIN diode, so the polarization of the proposed antenna can be switchable between linear, left-handed(LH) and right-handed(RH). By separating the ground plane for the DC bias, the size reduction effect is also obtained. When the proposed antenna is operated as linear polarization, the return loss and impedance bandwidth are 15 dB, 59 MHz, and when operated as LH and RH polarization, the minimum axial ratio and 3-dB axial ratio bandwidth are 1.17 dB, 1.67 dB, 28 MHz, and 32 MHz, respectively.

• Geophysics and Geophysical Exploration
• /
• v.13 no.3
• /
• pp.243-248
• /
• 2010

Two suspicious events, which were claimed as underground nuclear tests by North Korea, were detected in the northern Korean Peninsula on October 9, 2006 and May 25, 2009. The KIGAM and Korea-China Joint seismic stations are distributed uniformly along the boundaries between North Korea and adjacent countries. In this study, the data from broadband stations with the distance of 200 to 550 km from the test site are used to analyze and compare two nuclear tests of North Korea. By comparing the time differences of the Pn-wave arrival times of 1st and 2nd tests at multiple stations, the relative locations of two test sites could be calculated precisely. From the geometrical calculation with the velocity of Pn wave $V_{Pn}$ = 8 km/s, the 2nd test site is estimated to move in the WNW direction from 1st one with the distance of 2 km. Body wave magnitude, mb of the 2nd test, which was announced officially as the network average of 4.5, varies widely with the directional location of stations from 4.1 to 5.2. The magnitude obtained from Lg wave, $m_b$(Lg), shows less variation between 4.3 to 4.7 with the average of 4.6. The moving-window spectra of time traces of 1st and 2nd tests show very similar pattern with different scale level. In addition, the corner frequencies of P wave of 1st and 2nd tests at each station show no or negligible difference. This indicates the burial depths of two tests might be very similar. The relative yield amount of the 2nd test is estimated 8 times larger than that of the 1st from the weighted average of ground-velocity amplitude ratios.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.6
• /
• pp.1049-1056
• /
• 2016

In this paper, a design method for a compact dual-band slot antenna with bent slot is studied. Bent slots are added on the rectangular slot of the proposed antenna for dual-band operation. The rectangular slot is fed by a coaxial cable by placing a rectangular feeding patch inside the slot. When the bent slots are added onto the both corner of the upper side of the rectangular slot symmetrically, a new resonant frequency is created in low frequency because of the increasement of the slot length. A prototype of the proposed dual-band slot antenna operating at 2.45 GHz WLAN band and 4.50-8.30 GHz band including 5GHz WLAN band is fabricated on an FR4 substrate with a dimension of 30 mm by 30 mm. Experiment results show that the antenna has a desired impedance characteristic with a frequency band of 2.40-2.49 GHz and 4.33-9.85 GHz for an input reflection coefficient < -10 dB.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.11
• /
• pp.1208-1213
• /
• 2010

In this paper, a microstrip balun-BPF of slotted-square-patch type is proposed. The conventional balun-BPF has some drawbacks of narrow bandwidth and high insertion loss. In order to improve these weak points, we used a square patch in designing balun-BPF on which two slots intersecting perpendicularly and one corner-edge perturbation are adopted. This structure allows one of the most effective use of the patch space so that the insertion loss can be decreased. Changing the slot lengths is use to control the operating frequency and the bandwidth of the balun-BPF. A fabricated balun-BPF shows wide bandwidth of 300 MHz(12.7 %), small insertion loss of 0.56 dB, phase difference of $184^{\circ}{\pm}15^{\circ}$ and amplitude imbalances of within 1 dB between two output ports at 2.4 GHz band.

• Journal of Navigation and Port Research
• /
• v.38 no.6
• /
• pp.623-627
• /
• 2014

In recent years, wireless communication technologies in human body have received an increasing attention and the research on an antenna that can be worn also has been actively conducted. In this paper, an wearable antenna that can receive GPS signal frequency is proposed. The antenna was manufactured by using a copper polyester fabric with thickness of 0.08mm as a radiator and a ground plate, and a goatskin with thickness of 0.7mm as dielectric substrate. Cutting edges placed in diagonal direction of square patch in order to obtain a circular polarization characteristic, and the conductive cloth and leather was laminated by using a conductive epoxy. First, goatskin dielectric constant was obtained through the simulation and measurement of resonance frequency of the three square patch antennas with different size. On the basis of the results, an antenna operating in the GPS band was designed and the performance of the antenna was validated by making the experiment. The change of the characteristic of the antenna that is located on the shoulder parts of the clothing and wearing person were measured. And it was confirmed that the reception sensitivity has a similar level as compared to the commercially produced ceramic GPS antenna.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.13 no.6
• /
• pp.477-482
• /
• 2020

The human visual cortex has the characteristic that reacts sensitively to stimuli with special directional or temporal frequency changes while it is insensitive to selective stimuli of spatial phases. In this paper we implemented the model of complex cell using an image estimation iterative algorithm by Gabor wavelet transform. The performance of implemented model evaluated the consistency between the physiological experimental results in related papers. The implemented model is limited in the complete model of the receptive field in the retina where simple cells and complex cells are distributed together. But the implemented model express the reaction of the complex cells from the point of view of the detection of corners and edges.