• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.30 no.2
• /
• pp.153-162
• /
• 2012

In this paper, we propose a new shape similarity measure for M:N polygon pairs regardless of different object cardinalities in the pairs. The proposed method compares the projections of two shape functions onto Zernike polynomial basis functions, where the shape functions were obtained from each overall region of objects, thus not being affected by the cardinalities of object pairs. Moments with low-order basis functions describe global shape properties and those with high-order basis functions describe local shape properties. Therefore several moments up to a certain order where the original shapes were similarly reconstructed can efficiently describe the shape properties thus be used for shape comparison. The proposed method was applied for the building objects in the New address digital map and a car navigation map of Seoul area. Comparing to an overlapping ratio method, the proposed method's similarity is more robust to object cardinality.

• Journal of the Society of Naval Architects of Korea
• /
• v.37 no.1
• /
• pp.1-9
• /
• 2000

The roll damping characteristics of the three models of a 3 ton class fishing vessel such as the bare hull, hull with bilge keels, and hull with bilge keels and a central wing are investigated by the free roll tests in calm water in a towing tank with the variations of the forward speed, initial angle and OG. The experimental results are compared with the numerical results of mathematical modellings by the energy method for these three models and the energy dissipation patterns are also compared.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.1 no.1
• /
• pp.166-188
• /
• 1998

본 논문에서는 쿼터니온 궤환 개념이 기존의 오일러각 궤환 개념에 비해 추력벡터제어(Thrust Vector Control) 방식을 사용하는 전술 유도탄 자세제어에 보다 효과적으로 적용될 수 있음을 보인다. 오일러각 궤환 방식을 택한 기존의 자세제어기에서 오일러각 궤환 부분을 쿼터니온 궤환으로 적절히 바꾸어 주게 되면 자세명령 크기 변화에 따른 시간응답 특성의 변화를 줄일 수 있으며, 쿼터니온 궤환 방식을 택할 경우, 우주비행체 자세제어 분야에서 활발히 연구되고 있는 고유축(Eigen Axis) 회전에 의한 자세변환을 수행할 수 있는 자세제어기 설계가 가능하다. 고유축 회전은 최단경로에 의한 자세변환 개념이므로, 이러한 능력을 갖춘 자세제어기는 신속한 자세변환이 필요한 전술 유도탄의 초기비행에 매우 효과적으로 이용될 수 있다. 더욱이, 제어법칙에 공력모멘트를 보상하는 항을 추가하게 되면 변화가 심한 공력 모멘트가 유도탄의 회전운동에 미치는 영향을 줄일 수 있어 고유축 회전성능을 보다 개선시킬 수 있다. 우선, 오일러각 궤환보다 쿼터니온 궤환이 유리한 점을 논하고, 쿼터니온 궤환에 근거한 자세제어기의 설계 개념과 제안된 제어기에 의해 구성되는 폐루우프에 대한 안정성 문제를 다룬 후, 시뮬레이션을 통해 그 타당성을 검증한다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.10
• /
• pp.882-887
• /
• 2012

This paper describes on the aerodynamic characteristics of the first domestically manufactured aircraft, Buhwalho, in Korea. The computational fluid dynamics(CFD) calculations and wind tunnel test were utilized to investigate the basic aerodynamic characteristics of aircraft with control surface deflections and attitude changes. Variations of lift, drag and pitching moment due to angles of attack and control surface deflections were analyzed and also flight stability due to side force, yawing and rolling moments caused by the change of sideslip angles, rudder and aileron deflections were discussed. Through this study, the meaningful aerodynamic data by CFD calculations and wind tunnel tests were obtained and the flight characteristics based on these data were confirmed accordingly by the flight tests.

• Proceedings of the IEEK Conference
• /
• 2000.09a
• /
• pp.655-658
• /
• 2000

본 논문에서는 웨이브릿 영역에서 엔트로피 특징과 웨이브릿 모멘트의 융합에 의한 효율적인 영상기법을 제안한다. 엔트로피 특징은 밝기값의 국부적 변화도에 민감하고 벨리, 에지 등의 특징을 잘 검출한다. 이러한 특징을 밴드별 위치정보와 주파수정보를 모두 가지는 웨이브릿 모멘트와 융합하여 내용기반 영상검색에 효과적으로 적응하였다. 실험에 사용한 DB는 Corel Draw영상을 사용하였으며 실험 결과, 기존의 검색 방법들에 비해 매우 우수한 검색 성능을 보임을 확인하였다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1991.04a
• /
• pp.139-144
• /
• 1991

4WD자동차의 엔진마운트 설계기법의 정리 및 실제차량의 실험적 mode 해 석을 통해 다음과 같은 결론을 얻었다. 1. 4WD자동차의 엔진마운트 설계 개념을 체계화시키고, 이를 실제차량에 대 해서 실험적 mode해석을 해본 결과 잘 일치함을 확인하였다. 2. power transmission system에 부가되는 장치(front propeller shaft)의 영 향을 검토한바, frequency shift현상이 발생함을 확인하였다. 이러한 영향은 이들 부가장치들의 질량증가 및 관성모멘트의 변화로 기인되며, 질량의 증가 보다는 관성모멘트의 영향이 상대적으로 크리라 판단된다.

• Proceeding of EDISON Challenge
• /
• 2014.03a
• /
• pp.514-515
• /
• 2014

실리신의 single vacancy에 Sc부터 Zn까지 전이금속을 넣고 이에 따른 실리신의 자기 모멘트와 구조 변화를 density funtional theory(DFT) 계산을 통해 알아보았다. 실리신은 그래핀(Graphene)과는 다소 다른 경향을 보였으며, 이는 실리신의 buckled 구조와 결합 길이의 차이로 인한 것으로 생각된다. 자기 모멘트는 전이금속 impurity에 큰 영향을 받았다.

• Journal of the Korean Magnetics Society
• /
• v.14 no.4
• /
• pp.115-119
• /
• 2004

We measured in-plane 2 dimensional magnetization vector using two pick-up coil sets and investigate the relationship between magnetization vector and anisotropic magnetoresistance. We can determine magnetization vector by measuring magnetic moment in x and y direction simultaneously. As the uniaxial magnetic anisotropy of permalloy film increases, magnetoresistance approaches the expectation which is calculated from the angle between current vector and magnetization vector. Magnetoresistance ratio is linearly proportional to the y moment magnitude which is parallel to the current direction.

• Journal of Korean Society of Steel Construction
• /
• v.23 no.4
• /
• pp.455-464
• /
• 2011

In this study, the buckling analysis of the vertically curved stiffened web plate was conducted through finite-element analysis, using an eight- and nine-node flat shell element with a substitute shear strain field. To investigate the buckling behavior of the vertically curved web plate with a longitudinal or vertical stiffener under in-plane moment loading, parametric studies were conducted for the variation of the width (b) and ratio of the bending stiffness of the stiffener to that of the plate (${\gamma}=EI/bD$). The static behavior of the vertically curved web plate without a stiffener was also investigated, and then the buckling abilities of the longitudinal and vertical stiffeners were compared under moment loading.

• Journal of the Korea Concrete Institute
• /
• v.18 no.6 s.96
• /
• pp.711-720
• /
• 2006

The structural behavior of concrete girder in bridges constructed by free cantilever method is time-dependent due to creep and shrinkage of concrete. The constraint effects of longitudinal movement of concrete girders can introduce unfavourable moment into piers. This study is aimed at proposing a method to reduce the moment of piers in bridge constructed by free cantilever method. The method are systematically composed of time-dependent structural analysis of bridges and loading of control force during construction of bridge. Numerical analyses are carried out depending on the parameters such as amount of control force and flexibility of pier. Time-dependent structural behavior shows that moment of pier increases according as pier height decreases. Also, moment of pier decreases when control method are applied. Numerical result of the study represents that time-dependent moment of piers can be controlled effectively by employing the proposed method.