• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.873-877
• /
• 2006

[ $Ta_2O_5$ ] 절연막을 제조하기 위하여 ANODE OXIDATION 공정을 수립하였다. Electrolyte에서의 전압강하는 정전류 모드에서 예상되는 전압의 변화에는 영향을 주지 않지만, 정전압 모드에서 전류의 변화에 영향을 주는 것으로 나타났다. 전해질에서의 전압 강하가 음극산화 전압과 같은 값을 갖는 경우, 전류는$Ta_2O_5$/전해질 계면에서의 전압강하가 증가함에 따라 logarithmic한 형태로 변화하는 것으로 나타났다. 음극 $Ta_2O_5$ 절연막 제조공정에 있어서 전해질에서의 전압 강하는 정전류 모드에서 두께의 손실을 발생시키지만, 정전압 모드에서 다시 복원되기 때문에, 최종 두께는 음극산화 전압에 비례하는 것으로 나타났다. 음극 $Ta_2O_5$ 절연막의 전기적 특성을 조사한 결과, 항복전압은 Electrolyte의 농도와 Anodization Current에 반비례하는 것으로 나타났다. 절연막의 두께가 $1500\AA$일 때 Breakdown Voltage는 350volt. 유전상수는 29로 측정되었다.

• Korean Journal of Optics and Photonics
• /
• v.9 no.6
• /
• pp.408-412
• /
• 1998

As the radius of curvature of curved optical waveguide gets smaller, the loss increases at the junction of linear-curved waveguide by the cross sectional mode mismatch. The concept of lateral offset has been used widely to minimize it, and simple method of maximum matching has been efficient for most cases of silica waveguide with low optical confinement and large radius of curvature. Here, we analyzed that the propagation mode characteristics of the lateral offset and propagation mode characteristics of general case with effective index method and Airy function solution. As the normalized frequency varies, mode characteristics changes near the boundary of 1/V=0.7 and the simple matching of gaussian profile might give -35% of error at most. We proposed improved method with a new correction factor to improve the mode mismatch problem of conventional methods for general cases, and showed the convenience and feasibility of this method for the calculation of the lateral offset.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.3 no.2
• /
• pp.10-17
• /
• 1999

This paper investigates the linear stability of both uniform and non-uniform density plane mixing layers with special emphasis on the effect of the wake component in the velocity profile. Velocity and density profiles for laminar flows are obtained from analytic profiles. Mixing layers with wakes have two generalized inflection points and two unstable modes-sinuous and varicose modes. For uniform density mixing layers, sinuous modes are more unstable than varicose modes, which shows wakes will be destabilized by sinuous modes. For non-uniform density mixing layers with high density in high speed flows, sinuous modes are more unstable than varicose modes. For non-uniform density mixing layers with high density in low speed flows, varicose modes can be more unstable than sinuous modes.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.4
• /
• pp.785-792
• /
• 2012

In this paper, a current-voltage characteristics of n-channel junctionless and inversion mode(IM) MuGFET, and p-channel junctionless and accumulation mode(AM) MuGFET has been measured and analyzed for the application in high speed and low power switching devices. From the variation of the threshold voltage and the saturation drain current with the substrate bias voltages, their variations in IM devices are larger than junctionless devices for n-channel devices, but their variations in junctioness devices are larger than AM devices for p-channel devices. The variations of transconductance with substrate biases are more significant in p-channel devices than n-channel devices. From the characteristics of subthreshold swing, it was observed that the S value is almost independent on the substrate biases in n-channel devices and p-channel junctionless devices but it is increased with the increase of the substrate biases in p-channel AM devices. For the application in high speed and low power switching devices using the substrate biases, IM device is better than junctionless devices for n-channel devices and junctionless device is better than AM devices for p-channel devices.

• Proceeding of EDISON Challenge
• /
• 2016.03a
• /
• pp.8-14
• /
• 2016

화학 결합을 이해하는 중요한 방법 중 하나는 결합이 가지는 고유한 진동 모드를 분석하는 것이다. 진동 모드의 변화를 관측함으로써 다양한 외부 자극과 분자의 상호작용에 대한 연구도 가능하다. 본 연구에서는 전기장이 가해진 물 분자의 진동 모드 변화를 분석함으로써 전기장과 물분자의 상호작용이 화학 결합에 미치는 영향을 알아보았다. 물 분자의 특정 O-H 결합 방향으로 전기장을 걸어주었을 때 신축 진동수의 변화를 살펴봄으로써 결합의 변화를 분석했다. 전기장에 따른 결합의 진동수 변화를 vibrational Stark effect (VSE)라 하고 그 정도를 Stark tuning rate ${\Delta}{\mu}$ ($={\Delta}v/{\Delta}E$, ${\Delta}v$ :진동수의 변화, ${\Delta}E$: 전기장의 변화)로 정의한다. 이때 Stark tuning rate에 영향을 미치는 요소는 전기장에 의한 (1) 분자 구조 변화(geometric effect)와 (2) 전자 구조의 분극현상(polarization effect)으로 나누어 생각해 볼 수 있다. 본 연구에서 물 단일체, 이중체, 사중체의 O-H 결합에 대해 살펴본 결과, VSE 효과에 주로 영향을 미치는 것은 전기장에 의한 구조 변화인 것으로 나타났다. 이를 통해 전기장이 주는 전자 구조 분극 효과는 크지 않지만 이를 통해 유발되는 구조 변화에 의해 진동수 (또는 화학 결합의 세기)가 크게 변한다는 것을 알 수 있다. 그렇기 때문에 수소 결합 안정화로 인해 구조 변화가 쉬운 물 이중체, 사중체에서 VSE 효과가 크게 나타났다. 추가적으로 물 클러스터에서 형성되는 내부 전기장과 O-H 결합의 포텐셜 비조화성(anharmonicity)이 VSE에 주는 영향에 대한 연구도 수행하였다.

• The Journal of the Korea Contents Association
• /
• v.10 no.6
• /
• pp.364-372
• /
• 2010

The aim of this study was to evaluate effects of EEG patterns induced by three types ((1) resting mode(control group), (2) light massage mode, (3) strong massage mode in the electrical chair-massager for 15 minutes) in a sample of 16 healthy adults. Changes in anxiety and stress were assessed, and electroencephalogram was recorded. Anxiety scores(STAI: State Anxiety Inventory, VAS: Visual Analog Scale) decreased in all groups. For anxiety scores, the strong massage group showed the greatest decrease in stress. All groups also showed an increase in delta and theta activity, but only strong massage group showed a signigicant difference. All groups showed a decrease in alpha activity. Also, EEG changes in two groups except a control group showed a decrease in beta activity.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.21 no.2
• /
• pp.182-188
• /
• 2001

This paper presents the vibration characteristics of a rectangular plate with $45^{\circ}$ oblique crack subjected to a uniaxial tension. The experiment is adopted by the time-average Electronic Speckle Pattern Interferometry(ESPI) method. The natural frequency and mode shape are considered accurately according to the increase of tensile load. When tensile load is zero, the vibration modes we agreed with the smooth and the $45^{\circ}$ obliquely cracked plate. But according to the increasement of load it is shown that vibration modes are extremely varied. The effects of the crack under the vibration are discussed in detail. It is indicated that the increase of load makes the variation of the frequencies and modes complicate in the range of even a small load. The results are agreed with the FEM analysis within 5%.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.5
• /
• pp.48-59
• /
• 2019

In recent years, the type of bridge where cables such as suspension bridge and cable-stayed bridge are the main factors in the construction of long-range bridges has been soaring. The effects of cables on these structures are very large, and for structural analysis, it is necessary to study the cable and the structural changes according to the mode characteristics of the cables. In particular, cables are directly connected to camber adjustment, which conveys load effects on girders to tower, and are important components in the overall structure, and since the initial tension on the construction is compared with the tension over time, this study was conducted to help identify the condition of the bridge's aging and abnormalities. Therefore, in this study, the characteristics of the mode from the mode analysis through the impact hammer to the mass of the cable and the change in the length of the cable are analyzed.

• Journal of Korean Society of Steel Construction
• /
• v.9 no.4 s.33
• /
• pp.467-477
• /
• 1997

A series of experimental tests have been performed on a tube beam in which artificial damage is applied in order to address damage detectability using modal analysis. Modal parameters considered are frequency, displacement mode shape and strain mode shape CoMAC(Coordinate Modal Assurance Criterion) and Modal Vector Error have been adopted for presenting the change of displacement mode shape and strain mode shape. It is revealed strain mode shape is the most sensitive to damage.

• The Journal of the Acoustical Society of Korea
• /
• v.27 no.7
• /
• pp.365-371
• /
• 2008

In this study, beat control method using an equivalent ring model is proposed to control beat period of a slightly asymmetric ring. Slight asymmetry in a ring generates mode pair and the interaction of the mode pair makes beat in vibration and sound. In a ring, as a simplified bell type structure, mode data are measured and an equivalent ring is determined so that the measured mode condition is satisfied. By the finite element analysis on the equivalent ring, changes of mode pair condition are predicted when local mass is attached or the local thickness is decreased. The predicted results are compared with the experimental result and the validity of the proposed method is verified.