• Communications of the Korean Mathematical Society
• /
• v.15 no.3
• /
• pp.391-434
• /
• 2000

심플렉틱 구조는 국소적으로는 모두 같기 때문에 심플렉틱 다양체 연구는 대역적으로 연구해야한다. 그로모브가 복소해석학적 곡선을 원소를 하는 모률라이 공간의 연구가 심플렉틱 다양체를 연구하는 물고를 텃다. 특이점이 없는 복소곡선의 개수를 세는 그로모브 불변량은 도넬슨의 비선형 게이지 이론의 간략화라 할 수 있는 아벨리안게이지 이론에서 사이버그-위튼 불변량과 같음을 타우브스가 발견하였다. 또한 사이버그-위튼 불변량은 심플렉틱 다양체의 불변량으로 심플렉틱 구조연구에 큰 이바지하고 있다. 그로모브의 모듈라이 공간의 컴펙트하는 과정에서 자연스럽게 마크점과 특이점을 갖는 곡선의 그로모브-위튼 모듈라이 공간이 켐펙트가 되고 여기소 그로모브-위튼 불변량이 얻어진다. 이 그로모브-위튼 불변량은 대수기하와 이론 물리학의 끈이론에서 찾는 대수곡선의 개수를 나타내고, 코호몰로지의 컵곱의 일반화라 할 수 있는 퀸텀곱을 유도하고, 그로모브-위튼 포텐셜함수의 계수를 결정한다. 퀸텀곱의 결합법칙은 포텐셜함수의 WDVV-방정식과 동치를 나타나며 이는 프로베니우스 구조가 평탄함을 나타낸다. 그로모브-위튼 불변량은 앞으로 활발히 연구되고 수학에 광범하게 이바지 할 것이다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.2068-2072
• /
• 2009

본 연구에서는 국내에서 널리 사용되는 대표적 유역모형인 SWAT 모형의 한계를 인식하고 유출해석모듈과 하도수질모듈을 개선한 SWAT-K(Korea) 모형이 현재 오염총량관리 대상물질로 지정되어 있는 BOD 모의에 미치는 영향을 분석하기 위하여 충주댐유역을 대상으로 각 개선모듈별 BOD 모의 결과를 분석하였다. 유출해석모듈의 개선결과 하도의 흐름을 따라 이동하는 BOD 항목의 모의 특성 상 유출 구조의 개선에 의하여 BOD 부하량의 지체가 감소되며 첨두 부하량이 증가한 것을 확인할 수 있었다. 하도수질모듈의 개선결과 저유량 시 매개변수 산정에도 불구하고 증가하지 않던 값들이 모형의 개선에 의하여 정상적인 범위로 상승한 것을 확인할 수 있었다. 전체적인 개선에 의하여 각 모듈별 개선효과와 함께 충주댐 지점의 개선 전 후 일대일 비교를 수행한 결과 결정 계수($R^2$)가 0.54에서 0.88로 상승하며 개선 후 모의값이 실측값에 근사하게 모의되는 것을 확인할 수 있었다.

• Proceedings of the KIPE Conference
• /
• 2011.07a
• /
• pp.545-546
• /
• 2011

본 논문에서는 디지털 방식의 부하분담 및 리던던시를 위하여 고속 CAN통신과 디지털 IO를 조합한 새로운 구조의 통신시스템을 제안한다. 기존 방식에 비해 모듈 고장을 알리는 기능과 고장난 모듈을 통신라인에서 물리적으로 분리하는 기능을 각각 담당한다. 만일 한 모듈이 고장이 발생하면 Watch-Dog1은 마스터에게 그 정보를 전달하고, Watch-Dog2는 이 모듈통신선을 물리적으로 제거한다. 이때 리던던시용 모듈이 투입되고, 마스터는 CAN통신을 통하여 어느 모듈이 고장 났는지를 체크한다. 또한 각 모듈 상태를 파악하기 위해 별도의 제어선을 사용하여 모듈의 고장 상태 및 고장난 모듈의 위치를 정확히 파악함으로서, 효율적이고 고속의 부하분담을 구현하였다. 본 논문에서는 실험을 통해 제안된 알고리즘의 타당성을 검증하였다.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.11 no.5
• /
• pp.395-399
• /
• 2001

This paper describes modular fuzzy inference systems(MFIS) with adaptive capability to extract fuzzy inference modules from observation data through the learning process. The proposed MFIS is based on the structural similarity to Tagaki-Sugeno fuzzy models and a modular neural architecture. The learning of MFIS is done by assigning new fuzzy inference modules and by updating the parameters of existing modules. The fuzzy inference modules consist of local model network and fuzzy gating network. The parameters of the MFIS are updated by the standard LMS algorithm. The performance of the MFIS is illustrated with adaptive control of a nonlinear dynamic system.

• Journal of KIISE:Software and Applications
• /
• v.32 no.8
• /
• pp.730-741
• /
• 2005

Layered Architecture is a kind of nodule decomposition techniques, which decomposes a program by generality This paper proposes a ]aver based method for recovering layered architecture from object-oriented program and checking conformance against architectural document. To specify the rules for layered style in object-oriented program, we define a partially ordered set on modules by module use relationship and module layer relationship by module override relationship. The meaning of module layer relationship is explained with an example from design patterns. Steps to recover layered architecture from program are described and a metamodel for the recovery is proposed. Architecture recovery is performed on source codes from open-source software project, and the implication of parts that do not conform to its architectural document is discussed. As a result of checking, it is pointed out that, although the parts are considered allowable exceptions of layered architecture, their modifications should be controlled carefully.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.11 no.9
• /
• pp.782-787
• /
• 2001

In this paper, we propose an growing and pruning algorithm to design the adaptive structure of modular wavelet neural network(MWNN) with F-projection and geometric growing criterion. Geometric growing criterion consists of estimated error criterion considering local error and angel criterion which attempts to assign wavelet function that is nearly orthogonal to all other existing wavelet functions. There criteria provide a methodology that a network designer can constructs wavelet neural network according to one s intention. The proposed growing algorithm grows the module and the size of modules. Also, the pruning algorithm eliminates unnecessary node of module or module from constructed MWNN to overcome the problem due to localized characteristics of wavelet neural network which is used to modules of MWNN. We apply the proposed constructing algorithm of the adaptive structure of MWNN to approximation problems of 1-D function and 2-D function, and evaluate the effectiveness of the proposed algorithm.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.1
• /
• pp.13-22
• /
• 2001

This paper presents three dimensional structure of RF packages and the improvement effect of its electrical characteristics when implementing RF transceivers. We divided RF modules into several subunits following each subunit function based on the partitioning algorithm which suggests a method of three dimension stacking interconnection, PAA(pad area array) interconnection and stacking of three dimensional RF package structures. 224MHz ITS(Intelligent Transportation System) RF module subdivided into subunits of functional blocks of a receiver(RX), a transmitter(TX), a phase locked loop(PLL) and power(PWR) unit, simultaneously meeting the requirements of impedance characteristic and system stability. Each sub­functional unit has its own frequency region of 224MHz, 21.4MHz, and 450KHz~DC. The signal gain of receiver and transmitter unit showed 18.9㏈, 23.9㏈. PLL and PWR modules also provided stable phase locking, constant voltages which agree with design specifications and maximize their characteristics. The RF module of three dimension stacking structure showed $48cm^3$, 76.9％ reduction in volume and 4.8cm, 28.4％ in net length, 41.8$^{\circ}C$, 37% in maximum operating temperature, respectively. We have found that three dimensional PAA package structure is able to produce high speed, high density, low power characteristics and to improve its functional characteristics by subdividing RF modules according to the subunit function and the operating frequency, and the features of physical volume, electrical characteristics, and thermal conditions compared to two dimensional RF circuit modules.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.26 no.2
• /
• pp.68-75
• /
• 2022

In this study, in order to directly evaluate the prestress of the PSC structure, a new sensor module based on the measurement of the deformation of concrete was proposed using hetero-core optical fibers and performance tests were performed. In a hetero-core optical fiber, optical loss occurs when a specific part of the transmission path is bent, and the amount of optical loss changes linearly according to the magnitude of the curvature. In order to confirm the measurement performance of the sensor module and the applicability of the optical fiber, the sensor module was deformed and the light passing through the optical fiber was converted into wattage and measured. It can be seen that the light passing through the optical fiber has a linearity of 0.9333 in relation to the deformation while generating the maximum deformation of 0.5 mm at a rate of 0.12 mm/min in a cylindrical concrete specimen with a diameter of 15 cm and a height of 35 cm in which the sensor module is embedded. Based on the results of this experiment, it is judged that it is possible to directly evaluate the prestress of a PSC structure by embedding a sensor module using a hetero-core optical fiber in the structure and measuring the compression deformation in concrete. It is judged that it can be used as useful data for the development of a sheath tube integrated sensor module to be applied to be applied to the girder model experiment.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.11a
• /
• pp.273-276
• /
• 2008

A Through Bulkhead Initiation Module(TBIM) has been designed which guarantees the seal property without using O-ring. The TBIM works as the shock wave generated by a donor charge transmits to the acceptor charge. The structural safety of TBIM housing has been calculated via modeling analysis, and the ignition performance has been proved by 10 cc closed bomb test. The reliability analysis has been made using Probit method on the base of performance test results. According to the reliability analysis the bulkhead thickness of TBIM which is the most important design parameter has been determined.

• Korean Journal of Optics and Photonics
• /
• v.14 no.6
• /
• pp.578-582
• /
• 2003

We propose a novel structure of wavelength selective optical add/drop module comprising two tap couplers and a fiber Bragg grating. The device has unique features including a simpler structure and a lower cost of implementation as compared with existing devices for the same operation. The module performance has been measured and analyzed experimentally. The implemented prototype module shows good performance with no-crosstalk power penalty in a 155 Mbps per channel wavelength-division-multiplexing transmission system but suffers from a relatively high loss of 3.5 ㏈ and 21 ㏈ for transmitted and dropped channels, respectively. While the dropped channel extinction ratio was more than 25 ㏈, the transmitted channel extinction ratio was more than 35 ㏈.