백두산 지역 중기 마이오세 알칼리현무암에 포획된 페리도타이트 포획암은 주로 첨정석 레졸라이트로 조립질의 원생입상 조직을 보인다. 이 포획암들은 감람석을 치환하는 이차기원의 사방휘석과 감람석 결정입자의 경계를 따라 멜트(즉, 유리)를 산출하고 있다. 백두산 페리도타이트 포획암의 감람석, 사방휘석 그리고 단사휘석은 높은 Mg#(90~92), 첨정석의 Cr#는 11~29를 나타낸다. 백두산 페리도타이트 포획암의 주성분원소 성분은 심해 페리도타이트의 특성을 나타낸다. 단사휘석은 불호정성 미량원소에 부화되어 있으며, 두 종류의 미량원소 패턴을 보여준다.: (1) 경희토류원소가 결핍된 형태($(La/Yb)_N=0.1{\sim}0.2$, $(La/Ce)_N=0.4{\sim}0.8$). (2) 경희토류원소가 부화된 형태($(La/Yb)_N=2.2{\sim}3.8$, $(La/Ce)_N=1.2{\sim}1.6$). 계산된 평형 온도와 산소 분압은 각각 $920{\sim}1050^{\circ}C$와 ${\Delta}fO_2(QFM)=-0.8{\sim}0.2$이다. 백두산 페리도타이트 포획암들은 최대 15% 정도의 마그마를 만들고 난 후 맨틀에 남아있는 잔류 암석으로, 그 이후 실리카와 경희토류원소에 부화된 유체(혹은 멜트)에 의해 다양한 정도의 모달/은폐 교대작용을 경험하였음을 반영하고 있다.
본 논문에서는 스마트 무인기의 자유 진동 특성 및 로터의 회전으로 인한 기체 구조물의 진동특성 즉 강제진동 특성을 실험적으로 규명하기 위해 수행한 시험방법, 센서 및 장비 설치, 시험 결과 검증 방법 및 시험결과를 수록하였다. 스마트 무인기의 지지 조건은 번지코드를 이용하여 자유-자유 경계조건을 구현하였고, 시험은 3개의 가진기를 사용하여 다점 랜덤 가진법으로 구조물을 가진하였으며 약 100여개의 가속도계로부터 기체 구조물의 응답특성을 측정하였다. 주파수 응답함수를 통하여 다기준 최소 자승 복소지수법을 적용하여 고유 진동수, 감쇠율, 모드 형상등의 모달 매개변수를 산출하였다. 또한 강제 진동 시험은 스마트 무인기의 양쪽 로터가 장착되는 나셀 부위에 x,y,z 각 방향으로 가진기를 장착하여 로터 회전 주파수를 가진함으로써 구조물과 각종 장비의 진동응답 특성을 측정하였다.
철도차량 차체 설계시 음압레벨에 따른 소음해석을 통한 차체 패널의 감쇠특성을 최적화하는 것이 필요하다. 본 논문은 철도차량 차체용 알루미늄 더블스킨 압출패널의 진동감쇠특성 해석을 통한 철도차량 차체의 구조소음 해석에 관한 연구이다. 주파수응답 가진시험을 통하여 측정된 기계적 모빌리티 값인 포인트 모빌리티, 트랜스퍼 모빌리티, 모달 모빌리티와 단순음원이론을 사용하여 정규화된 음압을 계산하였다. 도포용 감쇠재의 감쇠값을 라미네이티드 쉘요소에 사용하여 유한요소해석을 수행함으로써, 감쇠처리에 의한 소음감소수준 예측을 하였다. 또한 실제 차량 구조와 유사한 고정경계조건의 감쇠특성해석을 통하여 열차주행시 발생하는 진동의 영향을 크게 받는 언더프레임과 같은 부위에 일정 두께의 감쇠재 코팅이 진동 및 소음억제에 큰 효과가 있을 것으로 사료된다.
본 논문에서는 헬리콥터 로터 시스템의 진동과 소음을 저감시키기 위해 개발이 진행 중인 능동거니플랩(AGF, Active Gurney Flap)에 대해 유한요소법을 이용하여 수행된 동특성 해석결과를 소개하였다. 거니플랩은 평판의 형태로 블레이드 하부 표면에 수직인 방향으로 전개되며, 블레이드 뒷전(T/E, Trailing Edge) 부위에 장착된다. 거니플랩 조립체는 전기모터와 L-형 링키지 및 플랩 등의 부품들로 구성되어 블레이드 내부에 장착되며, 고정프레임에서의 진동 성분들을 감소시키기 위해 3~5/rev 범위로 능동적인 제어가 필요하다. 따라서 외연적 시간적분법을 통해 로터 회전에 의한 원심력과 제어입력이 적용되고 있는 상황에서 거니플랩의 동적 응답특성을 분석하였으며, 해석 결과를 통해 거니플랩의 하향변위 요구도를 만족시킬 수 있음을 확인하였다.
The vibration characteristic of tire is heavily related to the noise and comfort on driving. Therefore, in this paper, we investigate modal charateristic of non-pneumatic tires with Honeycomb spokes. The modal analysis of non-pneumatic tire is investigated for geometric of non-pneumatic tire(NPT) which is designed according to the cell angle of honeycomb cell. Investigation of natural frequencies and mode shapes of non-pneumatic tire are compared regular type NPT with auxetic type NPT. The analysis is based on the finite element method and used ABAQUS program which is able to analyze of non-linear. The material of NPT is used for the Ogden energy model which is model of hyperelastic material. As a result, natural frequencies and mode shapes of non-pneumatic tires with honeycomb spokes are affected by the angle of honeycomb cell.
고속 비행체의 날개 구조물은 스킨과 튼튼한 골격으로 구성되어 있다. 플러터 해석시 날개 구조물의 고유진동모드를 이용하여 비정상공기력을 계산하고 모달접근법을 이용하여 시간영역이나 주파수 영역에서 구조물의 진동안정성을 분석하게 되므로, 사용되는 고유 진동 모드는 신중하게 선정되어야 한다. 이를 위해 날개 구조물과 같이 고차에서 스킨의 국부진동모드가 있는 경우 이러한 모드가 비정상공기력 및 플러터 특성에 미치는 영향을 분석하였다.
Recently, the need for slim type optical disk drive(ODD) has increased with popularization of lightweight notebook. Because of its lightweight and small structure, slim type ODD has low structural stiffness and it is weak to high-speed disk vibration. In this paper, Finite Element(FE) Model of slim type ODD is constructed and verified by experimental modal analysis. Additionally, sensitivity analysis is performed about structural parameters. As a result of sensitivity analysis, improved characteristic is verified by experiments using a sample of new model.
Fast Fourier Transformation(FFT) is one of the most useful way to analyze response signal for the purpose of grasping the dynamic characteristics of system. Excitation is a factor or process making noise or vibration. It's typical and simple experimental method widely used for catching hold of dynamic peculiar characters and modal behaviors of system by frequency analysis. There are harmonic excitation, impact excitation, random excitation, sweep excitation, chirp excitation and so on as the ideal method in an experiment using exciter. In this thesis, excitation testing module for NI-PXI equipment is developed. The analyzing module is developed with LabVIEW tool. A user can generate each waveform for shaking a structure and see quickly and easily modal shape of system with this module. This developed module will be expected to build up more convenient and serviceable measurement system.
In this study, the design method of flexible wing model for gust response measurement wind tunnel test was presented. The design concept proposed herein was validated by modal testing of the flexible wing model manufactured. In addition, aeroservoelastic modeling method for flexible wing model was presented and validated by comparing the gust response analysis results from the method proposed herein with those of commercial software. The gust response characteristics of the flexible wing model was studied by wind tunnel test for measuring the flexible wing gust response due to the induced gust excitation by gust generator. The aeroservoelastic modeling methods proposed and the wind tunnel test results obtained in this study can be applied for wind tunnel testing of the flexible wing for gust response alleviation.
Two types of bolted lap joints, one with a viscoelastic layer and the other without the viscoelastic layer were chosen to analyze the dynamic characteristics of the joints with the mechanical properties of the bolts in the joints are considered as computational variables. The finite element method was used along with the modal testing to verify the PEM model. The results in the bolted lap joints reveal that the higher the Young's modulus for the bolts we use the higher the natural frequencies we obtain fur the joints. However, the natural frequency differences in the first and second mode are not substantial but become noticeable in the higher modes. Lower natural frequencies were obtained for the bolted lap joints with the viscoelastic layer when compared with those of the bolted lap joints without the viscoelastic layer. And the differences in the natural frequencies for the two types of joints are relatively small in the first and second mode whereas in the higher mode the differences become significant. The loss factors were observed to be significant especially in the second mode for the bolted lap joints with the viscoelastic layer.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.