• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2011.06a
• /
• pp.189-191
• /
• 2011

구조물의 동적특성인 모드형상을 통해 국부적인 손상을 탐지하는 손상평가 기법은 많은 연구자에 의해 발전되고 있다. 하지만 플로팅 구조물에 대한 손상탐지 기법은 그 사례를 찾아보기 힘들다. 본 논문에서는 플로팅 구조물의 함체 부분을 모델링 하고, 손상 전과 손상 후 구조물의 모드형상에서 얻을 수 있는 모달 변위로 나타낸 손상지수를 통해 플로팅 구조물에 발생할 수 있는 손상을 추정하여, 제안된 이론의 적용성을 검증 하였다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.16 no.3
• /
• pp.333-342
• /
• 2003

The objective of this paper is to present an algorithm to locate and size damage in a beam structure. The method uses the changes in the modal strain energy distribution. A damage index, utilized to identify possible location and corresponding severity of local damage, is formulated and expressed in terms of modal displacements that can be obtained from mode shapes of the undamaged and the damaged structures. The possible damage locations in the structure arc determined by the application of damage indicator according to previously developed decision rules. The robustness and effectiveness of the method arc demonstrated using numerical examples of beam structures with simulated damage.

• Journal of Korea Multimedia Society
• /
• v.7 no.3
• /
• pp.427-437
• /
• 2004

Shape comparison between 3D models is essential for shape recognition, retrieval, classification, etc. In this paper, we propose a method for comparing 3D shapes, which is invariant under translation, rotation and scaling of models and is robust to non-uniformly distributed and incomplete data sets. first, a modal model is constructed from input data using vibration modes and then shape similarity is evaluated with modal strain energy. The proposed method provides global-to-local ordering of shape deformation using vibration modes ordered by frequency Thus, we evaluated similarity in terms of global properties of shape without being affected localised shape features using ordered shape representation and modal strain one energy.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2011.11a
• /
• pp.125-127
• /
• 2011

구조물의 동적특성인 모드형상을 통해 국부적인 손상을 탐지하는 손상평가 기법은 많은 연구자에 의해 발전되고 있다. 하지만 플로팅 구조물에 대한 손상탐지 기법은 그 사례를 찾아보기 힘들다. 본 논문에서는 플로팅 구조물의 축소모형을 제작하고, 손상을 모사하여 손상전과 손상 후 구조물의 모드형상에서 얻을 수 있는 모달 변위로 나타낸 손상지수를 통해 플로팅 구조물의 손상을 탐지 하였다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2012.10a
• /
• pp.279-281
• /
• 2012

구조물의 동적특성인 모드형상을 통해 국부적인 손상을 탐지하는 손상평가 기법은 많은 연구자에 의해 발전되고 있다. 하지만 플로팅 구조물에 대한 손상탐지 기법은 그 사례를 찾아보기 힘들다. 본 논문에서는 콘크리트재질의 플로팅 구조물의 축소모형을 제작하고 손상을 모사하여 손상 전, 후 구조물의 모드형상에서 얻을 수 있는 모달 변위로 나타낸 손상지수를 통해 플로팅 구조물의 손상을 탐지하였다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.6
• /
• pp.1391-1407
• /
• 1990

In this paper, optimization procedures are presented considering the static and dynamic constraints for laminated composite plate and hybrid laminated composite plate subject to concentrated load on center of the plates. Design variables for this problem are ply angle or ply thickness. Deflection, natural frequency and specific damping capacity are considered as constraints. Using a recursive linear programming method, the nonlinear optimization problems are solved. By introducing the design scaling factor, the number of iterations is reduced significantly. Composite plates could be designed optimally combined with FEM analysis under various conditions. In the optimization procedure, verification for both analysis and design of the laminated composite plates are compared with the results of the others. Various design results are presented for the laminated composite plates and hybrid laminated composite plates.

• Composites Research
• /
• v.12 no.2
• /
• pp.26-35
• /
• 1999

This paper presents the vibration damping characteristic of a single lap joint beam with partial dampers analyzed using the model strain energy method and the harmonic response analysis which were based on a finite element model. The two finite element analysis methods exhibited very similar results of the resonant frequency and system loss factor which were comparable to those by the theoretical analysis. Effects of the location of partial dampers and elastic moduli and thickness of their layers on the system loss factor were studied. The damping effects due to changes of modules and loss factor of the viscoelastic layer in lap joint and partial dampers were also studied. Consequently, the geometrical and material conditions at maximizing the system loss factor were suggested.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.7 no.3
• /
• pp.147-156
• /
• 2003

In this paper, a damage detection method using mode shapes of truss structures is presented. The theory is formulated based on the changes in the modal strain energy in a truss type structures due to damage. To examine the feasibility, the theory is applied to an experimental data of a 1:6 scale model of a typical hexagonal truss structure. The experiment consists of 17 damage scenarios subjected to three different types of damage. The damage evaluation results show that the proposed method detects successfully damage in truss elements and also show that the performance of proposed method can be significantly impacted by the noise in the measurement data for small damage.

• Journal of Navigation and Port Research
• /
• v.36 no.3
• /
• pp.163-168
• /
• 2012

Recently, people's desire for the waterfront space has been increasing, and more people want to spend their leisure time close to the water. This paper proposes a damage detection technique using the static strain for the floating structure. An existing damage index, in which the modal strain energy was utilized to identify possible location of damage, is expanded to apply the static strain. The new damage index is expressed in terms of the static strains of undamaged and damaged structures. After calculating damage index, the possible damage locations in the structure are determined by the pattern recognition technique. The accuracy and feasibility of the proposed method is demonstrated by using experimental strain data from a scale model of floating structure.

• Journal of Korea Game Society
• /
• v.7 no.2
• /
• pp.11-20
• /
• 2007

This paper proposes a real-time simulation technique for thin shells undergoing large deformation. Shells are thin objects such as leaves and papers that can be abstracted as 2D structures. Development of a satisfactory physical model that runs in real-time but produces visually convincing animation of thin shells has been remaining a challenge in computer graphics. Rather than resorting to shell theory which involves the most complex formulations in continuum mechanics, we adopt the energy functions from the discrete shells proposed by Grinspun et al. For real-time integration of the governing equation, we develop a modal warping technique for shells. This new simulation framework results from making extensions to the original modal warping technique which was developed for the simulation of 3D solids. We report experimental results, which show that the proposed method runs in real-time even for large meshes, and that it can simulate large bending and/or twisting deformations with acceptable realism.