• Geophysics and Geophysical Exploration
• /
• v.18 no.3
• /
• pp.115-124
• /
• 2015

A modified electrical resistivity survey has been suggested and applied to a leakage detection problem of concrete barrage. We suggest the modified electrical resistivity methods using electrodes floating on the water and apply line current sources instead of conventional point current sources in order to facilitate simple analysis. In addition, the study introduced the following three variations of modified electrode array: Direct potential array, Parallel potential array and Cross potential array. These arrays were tested and investigated through numerical experiment, physical model experiment and geophysical field exploration in order to verify their applicability to the water leakage detection of a concrete barrage. When water leakage occurred, all kind of array operations demonstrated distinct changes of aspects of potential difference in graphs obtained by not only the numerical and physical model experiments but also geophysical field exploration. Therefore, this modified electrode arrays of electrical resistivity survey, which has been adapted to the concrete barrage, has been found to be a useful method to detect water leakage.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.7A
• /
• pp.776-785
• /
• 2008

Compared with the existing cellular base station whose radio parameters are configured manually, the small base station named as self-configurable base station configures its radio parameters automatically by the central controller. When installing the self-configurable base station, it should be considered primarily that the seamless coverage for the target area is secured while the signal interference to the existing cellular service area must to be minimized. In order to achieve this, it is very important to select the correct radio parameters, e.g., transmission power and working frequency. In this work, we formulate and solve the optimization problem by using mixed integer programming to optimize the air parameter for the self-configurable base stations.

• Science of Emotion and Sensibility
• /
• v.7 no.1
• /
• pp.23-28
• /
• 2004

In this paper, we investigated the affective components of facial beauty. In study 1, we did factor analysis of affective evaluations of the faces, and about 65% of the variances are explained by only two factors. Two factors were named 'sharp' and 'soft', respectively. In study 2, the correlation between facial beauty and affective evaluations was analyzed, and the correlation between facial beauty and sharp factor was significant. In study 3, we made the new images by morphing and warping the faces: 'average', 'high-ranked', and 'exaggerated'. The participants evaluated the 'high-ranked' face more beautiful than the 'average' face, and the 'exaggerated' face more beautiful than the 'high-ranked' face. The rating of affective words on the faces showed that the 'average' face was related to 'soft' impression, the 'high-ranked' image to 'sharp' impression, and the 'exaggerated' face might have double impression. These results might support the directional hypothesis for the facial beauty.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.33 no.6
• /
• pp.565-571
• /
• 2000

Mixed primers based on the high sequence homology of selected regions of known connexins (Cxs) was used for PCR reaction. A full-length connexin cDNA of sweetfish (Plecoglossus altivelis) was cloned by rapid amplification of cDNA 5'and (5'RACE) and 3'RACE method. When compared to other known Cx sequences, homology of sweetfish Cx cDNA to Atlantic croaker, Mycropogonias undulatus Cx32.7, bovine, Bos taurus Cx44 and Atlantic croaker Cx32.2 were $63.8{\%},\;61.6{\%}\;and\;56.7{\%}$, respectively. This cDNA encoded 308 amino acids (35,028 dalton) and named as sweetfish Cx35. Hydropathicity analysis of predicted amino acid sequences indicated that sweetfish Cx35 have four major hydrophobic regions and four major hydrophilic regions, suggesting its topology is similar to that of known Cxs. The presence of a tfical Cx consensus sequences were identified in each of the extracellular loops (first loop and second loop).

• Journal of KIISE:Computing Practices and Letters
• /
• v.14 no.5
• /
• pp.532-536
• /
• 2008

In this paper, we propose the method to measure tensions of character motions, using LMA (Laban Movement Analysis). Using tension values, we tan take advantage of them as a standard for synchronization of motion and BGM(Back Ground Music). In LMA, a motion is divided into 4 space-time factors which are called Efforts, and each Effort has two bases opposed to each other. We can analyze the motion by justifying which basis is stronger than the other in each Effort of motion. To measure quantitatively tension values, we propose some equations based on kinematics and dynamics. Then we can measure the tension value by the weighted sum of values calculated from those equations. Each weight can be determined by the optimization process which tries to minimize the difference between the calculated tension value and human's decision. The experimental result shows that the in creasing order of the motion tension value is similar to that of the tension score given by human.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.12
• /
• pp.1057-1064
• /
• 2014

The satellite on geostationary orbit accommodates multiple payloads into a single spacecraft platform and launched in June 26, 2010. The electrical power required to the satellite during sunlight is generated by a solar array wing. The solar cells are the GaInP/GaAs/Ge Triple Junction cells named Gaget2 cells from RWE Space, which were based on a Spectrolab epitaxy. This paper evaluates solar array power performance at end of design life based on the trend analysis results for the flight data on geostationary orbit. The estimated solar array power performance at end of design life compares with the power performance provided by solar array manufacturer. The solar cells show nominal behavior without significant degradation through the trend analysis results.

• Korean Chemical Engineering Research
• /
• v.45 no.5
• /
• pp.455-459
• /
• 2007

Plasma catalytic methane conversion was carried out in the presence of sol-gel derived $Pt/TiO_2$ catalysts within a dielectric-barrier discharge (DBD) reactor. Plasma-assisted reduction (PAR) was applied to reduce the prepared $Pt/TiO_2$ catalysts in DBD reactor, and prepared catalysts were successively reduced by PAR within 20 min irrespective of the Pt loading and the calcination temperature. The highest methane conversion was 40% when 3 wt% $Pt/TiO_2$ and 5 wt% $Pt/TiO_2$ catalysts were used after calcination at $600^{\circ}C$. The selectivities of light alkanes ($C_2H_6$, $C_3H_8$, $C_4H_{10}$) were highly increased when $Pt/TiO_2$ catalysts were used in DBD reactor.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.4
• /
• pp.91-99
• /
• 2018

Mechanical Properties of Rock Slope as a safe and effective interpretation should be thoroughly investigated. Clinometer, however, this new measurement due to the restrictions of the research for the joint orientation is needed. In this study, characteristics of the joint orientation can be used to analyze the joint orientation of developing a joint survey system that can be applied to the field. The system is developed and Analysis software to hardware. Hardware is composed to measure the joint orientation of measuring module, measuring the transfer of data transfer module. From the software is measuring module from the data to analyze the orientation of the joint development, and drone joint orientation survey system named. Can not be measured by the investigation, including regional development approach is a system that has been difficult if the Field Application of the lab test results of the joint orientation and effectively.

• Korean Journal of Microbiology
• /
• v.41 no.1
• /
• pp.74-80
• /
• 2005

For the reseach of the natural marine antioxidant, an antioxidant-producing bacterium was isolated from seawater in Jeju costal area. The isolated strain SC2-1 was Gram-positive, catalase positive, oxidase negative, motile and small rods. The strain utilized sucrose, dextrose, fructose, mannitol and maltose as a sole carbon and energy source and NaCl required for growth. The radical scavenging activity of the culture supernatant was detemined by DPPH method. This bacterium was identified based on morphological, biochemical characteristics and 16S rDNA sequence analysis, and then was named Exiguobacterium sp. SC2-1. The optimum conditions of culture for production antioxidnat were $25^{\circ}C$, pH 6-8 and $4\%$ NaCl. The stain showed the highest activity and growth cultured in medium which added $1\%$ maltose. Hydroxyl radical activity of the supernatant of Exiguobacterium sp. SC2-1 was $73\%$. The SOD activity of the culture supernatant was estimated about $35\%$.

• Microbiology and Biotechnology Letters
• /
• v.39 no.3
• /
• pp.218-223
• /
• 2011

To obtain eicosapentaenoic acid (EPA)-producing bacteria, some 600 strains of bacteria were isolated from Antarctic sediment and marine organisms during the summer expedition of 1999-2000 and 7 EPA-producing bacteria were obtained through screening with TLC and GC. A strain designated as L93 showed the highest EPA production, which was gram-negative, rod-shaped bacterium. L93 strain was identified as Shewanella sp., from the sequence analysis of 16S rDNA. Optimal conditions temperature and pH for the growth and EPA production were about $4^{\circ}C$ and pH 7. In addition, its production was optimized by 50%(w/v) sea salt. We establish the optimal production system to produce about 320 mg per liter by using this optimal EPA production conditions. EPA-methyl ester was purified from cultured L93 strain to a purity of higher than 97% and typical purification yield is greater than 72% of the input amount via urea complexation and HPLC.