• Journal of Aerospace System Engineering
• /
• v.12 no.3
• /
• pp.38-44
• /
• 2018

Military aircraft may have fatigue cracks in structurally weak areas due to multiple factors such as the accumulation of flight time while perform various missions and unpredictable air conditions. As a fatigue crack progresses, there is a risk that the structure will be destroyed in extreme cases, which can have a significant impact on flight safety. In this study, a cracking phenomenon was observed during the periodic inspection the inner support of the fairing, which is installed to protect the connection between the wing and the body of the aircraft. Therefore, a study on a series of quality improvement processes for reformation was described. In order to identify the causes of cracks, pre-load generation occurrence during the wing assembly process was investigated and a fracture analysis was performed. Also, the design of the support structure was suggested in terms of preventing recurrence of cracks. The structural integrity was verified using a stress and fatigue life analysis.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.4 no.2
• /
• pp.215-222
• /
• 1999

Integrating energy storage into electlic power system has long been recognized as a way to maximize a utility's g generation and transmission capacity, Electlic power can be stored during off-peak periods and then recovered during p peak conditions to offset the need for larger generation and transmission capacity, Currently large-scale SMES for the p purpose of energystorage which can be also se$\pi$ed by battery storage or flywheel system has been developed, and near f future it will be integrated into power grids, This paper presents an investment analysis on large-scale SMES which c can determine its optimal size in power systems, In operation model. least generation cost for energy storage in SMES a and its mar밍nal capacity cost can be calculated using the discreteness of probability distribution for power availability I Investment decisions are made by the maximum p디nciple and the case study shows the optimal operation and realistic i information on the proper size of large-scale SMES in power systems.

• Journal of Broadcast Engineering
• /
• v.9 no.3
• /
• pp.246-256
• /
• 2004

In this paper, we proposed a new lossless image compression algorithm. Lossless image compression has been used in the field that requires the accuracy and precision. Thus, application areas using medical unaging, prepress unaging, image archival systems, precious artworks to be preserved, and remotely sensed images require lossless compression. The compression ratio from lossless image compression has not been satisfactory, thus far. So, new method of lossless image compression has been investigated to get better compression efficiency. We have compared the compression results with the most typical compression methods such as CALIC and JPEG-LS. CALIC has shown the best compression-ratio among the existing lossless coding methods at the cost of the extensive complexity by three pass algorithm. On the other hand, JPEG-LS's compression-ratio is not higher than CALIC, but was adopted as an international standard of ISO because of the low complexity and fast coding process. In the proposed method, we adopted an adaptive predictor that can exploit the characteristics of individual images, and an adaptive arithmetic coding with multiple probability models. As a result, the proposed algorithm showed 5％ improvement in compression efficiency in comparison with JPEG-LS and showed comparable compression ratio with CALIC.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.33 no.3
• /
• pp.598-602
• /
• 2004

In the preparation of jam using Undaria pinnatifida sporophyll, effects of food ingredients to the jam rheology were investigated. The paste was prepared by crushing the sporophyll using chopper and homogenizer with 2.5 times water and then it was filtrated before to make a jam. The sporophyll jam was adjusted to 62$^{\circ}$Brix by heating and concentration. It was a similar to the commercial jam in the gel strength. Among the various treatments, the jam prepared with 60% (w/w) sugar, 0.75% (w/w) high methoxy (HM) pectin and 0.3% (w/w) citric acid showed best quality aspects of both texture profile analysis (TPA) and sensory evaluation. Addition of 0,08% (v/w) synthetic strawberry flavor and 0.5% (w/w) cinnamon powder to sporophyll paste gave a good masking effect for the undesirable sea mustard flavor.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.45 no.3
• /
• pp.142-148
• /
• 2008

Though a deblocking filter of H.264/AVC provides enhanced image quality by removing blocking artifact on block boundary, the complex filtering operation on this process is a dominant factor of the whole decoding time. In this paper, we designed an ASIP to accelerate deblocking filter operation with the proposed instruction set. We designed a processor based on a MIPS structure with LISA, simulated a deblocking later model, and compared the execution time on the proposed instruction set. In addition, we generated HDL model of the processor through CoWare's Processor Designer and synthesized with TSMC 0.25um CMOS cell library by Synopsys Design Compiler. As the result of the synthesis, the area and delay time increased 7.5% and 3.2%, respectively. However, due to the proposed instruction set, total execution performance is improved by 18.18% on average.

• Horticultural Science & Technology
• /
• v.16 no.3
• /
• pp.350-351
• /
• 1998

This study was conducted to investigate the effect of reflective film(RF) mulching on the growth and flowering of snapdragon 'Fujinoyuki' in greenhouse cultivation. On the spectroradiometry of mulching materials in the wavelength zone of 300nm to 1100nm, 85% of total light source was reflected from RF, while over 95% was absorbed into black polyethylene film(BL). Under plant canopy, light, air temperature, and leaf temperature were higher on the RF mulching than BL, but soil temperature and soil heat flux were higher under the BL. Primary plant growth such as dry weight, stem hardness, lodging, and transpiration was superior when using RF mulching. RF mulching accelerated the plants to bloom about 12 days earlier with admirable cut flower quality.

• Journal of Korea Multimedia Society
• /
• v.13 no.4
• /
• pp.560-574
• /
• 2010

Recently, many people can easily contact video telephony service through the mobile terminal owing to the commercialization of 3G communication technology. However, the quality of the serviced video telephony has been not good yet by the actual mobile restrictions. For solving quality problems, this paper presents the design of the object-based video CODEC using hybrid transform in mobile video telephony. The proposed design firstly segment each frame into a significant object and an insignificant object. The proposed design is to improve the quality of a significant object by limiting the bit rate of a insignificant object. Thus, we compress a significant object with high quality and low compression ratio and compress an insignificant object with low quality and high compression ratio. Furthermore, we control the bit rate of the video stream in the limited bandwidth by adjusting the compression ratio of each object. From experimental results, we confirmed that our method has more higher quality than methods in the conventional CODECs at the significant region on the same bit rate.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.242-245
• /
• 2003

Most engineering tasks require collaboration between many users in major hospital Construction Projects that have many risks. Loss of cost and change orders occurred in factors such as information exchange, misunderstandings, advanced Technology in hospital projects. Moreover, changes in context, costs, requirements, deadlines, etc. require negotiation of issues that may modify important project characteristics. Each part of the major hospital construction projects have been rapidly changed technology of equipments. Therefore it is a major challenge to make a high level of communication and to have mutual understanding. The objective of this paper is to reduce risks for the design process and construction process of hospital projects.

• Journal of the Korea Computer Graphics Society
• /
• v.22 no.2
• /
• pp.1-10
• /
• 2016

The computational cost of clothing simulation and rendering is mainly depends on the type of mesh and its quality. Thus, quadrilateral meshes are generally preferred over triangular meshes for the reasons of accuracy and efficiency. This paper presents a method of quadrangulating sewing pattern based on the recursive geometry decomposition method. Herein, we proposed two simple improvements to the previous algorithms. The first one deals with the recursive geometry decomposition in which the physical domain is decomposed into simple and mappable regions. The second proposed algorithm deals with the vertex validation in which the invalid vertex classification can be validated.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.8
• /
• pp.663-673
• /
• 2013

The drastic growth of mobile communication and spreading of smart phone make the significant attention on Location Based Service. The one of most important things for vitalization of LBS is the accurate estimating position for mobile object. Focusing on IMU deployed in smart phone, we develop a hybrid positioning estimation framework with a combination of WPS. The developed approaches can strengthen the advantages of independent indoor applicability of IMU. The estimation of IMU is efficiently compensated by radio fingerprint based Wi-Fi Positioning System. We put a focus especially on the hybrid algorithmic framework. Compared on the existing approaches of WPS or IMU, we achieve the comparable higher performance on both of average error of estimation and deviation of errors. Furthermore test-bed based on smart phone platform is practically developed and all data have been harvested from the actual measurement of test indoor area. This can approve the practical usefulness of proposed framework.