• Journal of the Korean Society for Library and Information Science
• /
• v.51 no.4
• /
• pp.183-201
• /
• 2017

The purpose of this study was to examine the current staffing practices in public libraries and to analyze the relevance of legal standards of public library staffing. It analyzed the national library statistical data to obtain the national average staffing rate, reviewed related literature to understand the rationales that established the key attributes that construct the current legal standards, and compared the placement rates of the three standards, namely the current legal standards, Korean Library Association's standards, and IFLA staffing standards, to determine the optimacy of the legal standards. It found the current placement rate in the legal standard was only 18.2%, marking the lowest rates among the three compared standards, indicating the current legal standards being unnecessarily high. The study attributes the problem to the structure of the current legal standards that calculate the staffing size based on the building and collection size rather than service populations. The findings of this study suggest a revision of the current standard based on service population while retaining the minimum staffing of three librarians even the smallest public library unit.

• Analytical Science and Technology
• /
• v.24 no.6
• /
• pp.503-509
• /
• 2011

Specific surface area is becoming a very important factor when newly developed advanced nano-materials are evaluated. But there have been many differences in results when measuring specific surface areas, depending on the measuring equipments and analysis method. To verify the reliability of the specific surface area measurement device supplied within the country, Round Robin Test (RRT) has been done at 21 affiliated research institutes. As a result, it was found that several institute had problems in measuring of gas adsorption amount in measuring equipment, and this proved the need for certified reference material (CRM). Furthermore, it was also found that the results from BET analysis is easily swayed by the analyst's subjectivism, and the calculated results may differ up to 16% in case of CRM I depending on the selection range of BET analysis. So this showed that a standard guideline for BET constant C value and fitting correlation coefficient R is needed, to properly select range in BET analysis. The experience in RRT, distribution of CRM, and standardized procedure would result in improved reliability in industrial processes, and thus, would contribute to the quality management, the productivity improvement, the safety evaluation, and the new material development.

• The korean journal of orthodontics
• /
• v.38 no.2
• /
• pp.74-82
• /
• 2008

Objective: This study examined the craniofacial morphology of young patients in their prepubertal stage showing class I, II malocclusion, by analyzing lateral cephalograms, and analyzed its relationship with tongue position, tongue space, and airway space in order to ascertain the effects of nasopharyngeal airway and tongue morphology on the form of the malocclusion. Methods: Seventy-six patients aging from 9 to 11 were divided into two groups depending on the ANB difference on the lateral cephalogram: Experimental group (CI II malocclusion group) showing $0{\le}ANB$ difference < 4.0; Control group (CI I malocclusion group) showing $0{\le}ANB$ difference < 4.0. The tongue space, space between palate and tongue, nasopharyngeal airway space and craniofacial morphology were compared between the two groups. Results: Tongue space, palate-tongue space, nasopharyngeal airway space showed no significant differences between class I and class II malocclusion groups. Hyperdivergent faces were associated with smaller nasopharyngeal airway space. Longer anterior facial height and posterior facial height were associated with larger tongue space, and greater anterior facial height were associated with lower tongue position. Smaller nasopharyngeal airway space showed smaller tongue space. Conclusions: Tongue space and nasopharyngeal airway space showed no significant differences between class I malocclusion group and class II malocclusion group. Only anterior facial height and posterior facial height had an influence on tongue space and nasopharyngeal airway space.

• Journal of Korean Association for Spatial Structures
• /
• v.9 no.4
• /
• pp.81-88
• /
• 2009

Damage on low?rise buildings caused by typhoons and storms is increasing every year. Thus, this study examined the distribution of wind pressure coefficient at each position according to the height of monosloped roof, and measured wind pressure coefficient according to tributary area and compared it with the current wind load standard. We analyzed six areas in order to analyze characteristics at each position of a half span roof, and found that the wind pressure coefficient was around 25% higher at the high comer (HC) than at the low corner (LC). The distribution pattern of peak pressure coefficient at each position was the same as the AIK load standard, but in the results of our experiment, wind pressure was around 40% lower than the load standard at HC and around 37% higher than the load standard at LC.

• Journal of the Korea Institute of Building Construction
• /
• v.19 no.5
• /
• pp.431-438
• /
• 2019

In this research, the proper number of entrances in the evacuation facilities for civil and military personnel was determined by using parametric study and regression analysis. The current standards on the emergency evacuation facility only set the number of possible evacuees and the architectural floor area after the evacuation have been completed. On the other hand, there are needs to consider the dynamic standards along with allowable evacuation time such as the number of entrance, staircases and so on rather than the static standards such as the floor area. The number of entrances and their location are required in order to account for the allowed evacuation time of particular number of people in a set area. The results of this research could be contributed to the standards which should contain the dynamic conditions associated with evacuation.

• Bulletin of the Korea Photovoltaic Society
• /
• v.6 no.2
• /
• pp.7-14
• /
• 2020

육상태양광 발전원의 단점을 보완하기 위한 수단으로 유휴수면 활용 및 발전량 증대 등의 장점을 앞세우며 수상태양광 발전시스템이 대두되었으나, 설치면적 축소 등의 민원이 지속적으로 제기되며 한국환경정책평가연구원(KEI)에서도 설치면적에 대한 가이드라인이 필요함을 제시하기에 이르렀다. 이에 본 논문에서는 수상태양광 설치 시 제한된 설치면적 내에서 설치용량 및 발전량을 증가시킬 수 있는 새로운 수상 태양광 발전시스템 방법론을 제안하여, 국토의 효율적 및 친환경적 이용으로 「재생에너지 3020 이행계획」을 달성하면서 주민수용성을 증대시킬 수 있는 방안을 모색하고자 한다. 상주 수상태양광 오태2발전소를 대상지로 선정하여 현재 정남향(0°)으로 배치되어 있는 모듈을 기준으로 동일한 모듈 경사각이지만 동서방향(±90°)으로 모듈 방위각을 변경하여 배치한 경우의 비교 분석 연구 결과, 모듈 남향 배치 대비 동서방향 배치 시 설치용량은 13.25%, 발전량은 4.03%가 각각 증가하는 결과를 보였다. 본 연구에는 Sketchup Software를 통한 3D 모델링 및 PVSyst 프로그램을 이용하여 시뮬레이션 비교 분석을 진행하였다.

• Nuclear Engineering and Technology
• /
• v.27 no.4
• /
• pp.626-634
• /
• 1995

소수성 고운자촉매는 중수형 원자력발전소의 감속재 및 냉각재로 사용되는 중수의 제조, 그리고 발전소의 가동에 따라 중수중에 축적되는 삼중수소의 제거공정 둥에 이용된다. 여러 소수성 담체중 하나인 소수성 고분자담체를 제조하기 위하여 스티렌-디비닐벤젠의 제조 특성을 실험하였다. 제조된 담체에 백금 금속을 담지시켜 촉매를 완성한 후 삼중수소제거 실증실험을 통하여 촉매성능을 확인하였다. 스티렌-디비닐벤젠 고분자담체의 제조시 담체의 기공 특성 및 비표면적에 대한 용매의 영향을 실험하였다. 또한 용매비를 변화시킨 경우에는 solvating power 값을 계산하여 거시기공 형태의 담체 형성기준을 정하였고 여기에 따른 기공 특성 및 비표면적 변화를 부인하였다. 담체의 제조 후 후처리 방법을 변화시켜 기공 특성 및 비표면적 변화를 확인하였고, 이의 결과를 통하여 적절한 후처리 방법을 정하였다. 담체의 입자크기를 조절하기 위해 중합반응 과정중의 교반속도를 변화시켜 담체의 크기 변화를 실험하였다. 제조된 담체에 백금 금속을 담지시켜 촉매를 완성한 후 삼중수소제거 반응실험을 통해 촉매의 활성을 확인하였다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2015.10a
• /
• pp.268-269
• /
• 2015

National Maritime PNT Office is operating 17 DGPS reference sites. Considering the relatively small size of South Korea, however, we thought that it is maintaining too many stations. For this reason, new algorithms were developed to effectively generate Pseudo-Range Corrections for the purpose of providing consistent DGPS accuracies throughout the country even with a minimum number of stations.

• Proceedings of the Korean Society of Disaster Information Conference
• /
• 2015.11a
• /
• pp.339-340
• /
• 2015

본 연구의 목적은 우리나라의 소방력을 효율적으로 배치하기 위해 전문가를 중심으로 설문조사를 실시하여 우리나라의 환경과 수요에 부합하는 소방력 배치기준의 핵심요소를 파악하기 위함이다. 설문조사는 소방력 배치기준 핵심요소들의 객관적인 비교결과를 제시하기 위하여 델파이 기법을 활용하였다. 연구결과를 종합해 볼 때, 우리나라의 소방력배치는 관할면적과 관할인구에 기초한 단순배치에 머물고 있다. 국내 소방력 배치의 문제점을 개선하기 위해서는 소방환경과 소방수요, 소방력과 관련된 다양한 변수들을 반영할 수 있는 새로운 소방력 배치기준을 마련해야 하며, 시 도별 지자체의 환경에 따른 소방력 배치가 이루어져야 할 것으로 사료된다.

• Proceedings of the Korean Society for Bio-Environment Control Conference
• /
• 1999.11a
• /
• pp.169-173
• /
• 1999

90년대에 접어들면서 전국적으로 시설 토마토 재배면적은 빠르게 증가하고 있으나 그에 따른 재배 기술의 향상은 미흡하여 일부 품질이 저하되는 문제점을 안고 있다. 생활 수준의 향상과 더불어 토마토에 대한 소비자의 기호도가 다양화되면서 토마토의 선택 기준이 색택 이나 모양 등의 외적 품질에서 맛을 중시하는 내적 품질로 바뀌었다. 특히 당도가 중요한 선택 기준이 되고 있다. (중략)