• Tuberculosis and Respiratory Diseases
• /
• v.44 no.3
• /
• pp.611-620
• /
• 1997

Objectives : The differentiation of tuberculous effusion from the other causes of exudative pleural effusion remained difficult even with aids of biochemical analyses and pleural biopsy. As the pathophysiology of tuberculous pleural effusion is an enhanced cell mediated immunity, Adenosine deaminase(ADA) and various eytokines including Inteferon-$\gamma$, tumor necrosis factor alpha(TNF-$\alpha$) are considered as useful diagnostic tools in differentiating exudative pleural effusion. The author would like to demonstrate the diagnostic usefulness of TNF-$\alpha$ in the differentiation of exudative pleural effusion, and compared the discriminating ability of TNF-$\alpha$ with ADA. Methods : Pleural fluids obtained from 80 patients (tuberculous : 39, malignant : 31, parapneumonic : 10) with exudate pleural effusions were processed for cell counts and biochemical analysis including ADA and TNF-$\alpha$. Results : Tuberculous pleural fluid showed higher levels of ADA and TNF-$\alpha$, $48.7{\pm}32.7U/L$ and $184.1{\pm}214.2pg/mL$ than that of non-tuberculous effusion $26.0{\pm}41.3U/L$ and $44.1{\pm}114.2pg/mL$, respectively (ADA, TNF-$\alpha$, p < 0.05, p < 0.01). Receiver operating characteristics(ROC) curves were generated for ADA and TNF-$\alpha$ and the best cut-off value for adenosine deaminase and TNF-$\alpha$were considered as 30U/L and 15pg/ml, respectively. Comparing the area under the ROC curves, there was no significant difference between ADA and TNF-$\alpha$. Conclusion : For the differential diagnosis of tuberculous pleural effusion from the other causes of exudative pleural effusions, TNF-$\alpha$ as well as ADA was considered as useful diagnostic method. However adding TNF-$\alpha$ to ADA has no further diagnotic benefit than ADA alone.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.12 no.2
• /
• pp.111-122
• /
• 1992

This experiment was conducted to determine the effects of spring seeding dates on the growth, yield and quality of early and late maturing spring oat (Auena sativa L.) cultivars on the forage experimental field, College of Agriculture, Seoul National University, Suwon from March to June, 1991. The experiment was arranged as a split plot with three replications. Oat cultivars, Cayuse and Speed oat, were the main plots, and seeding dates consisted of March 15, 22, 29, April 5 and 12 were the subplots. 1. A 7-day delay in seeding represents approximately 3~8 days being early in heading. The heading date of the early maturing cultivar, Speed oat, was 14 days earlier than that of the late maturing cultivar, Cayuse. 2. The concentrations of Crude protein (CP), Acid detergent fiber (ADF), Neutral detergent fiber (NDF) and zn uitro dry matter digestibility (IVDMD) of the late maturing cultivar, Cayuse, harvested May 29 were 19.6, 30.0, 44.9, and 82.7 %, respectively, but those of the early maturing cultivar, Speed oat, were 14.8. 33.3. 52.3, and 71.2 %, respectively. Chemical analyses of oat forage indicated that the contents of crude protein and lVDMD were increased from March 15 to April 12 seeding, while crude fiber was decreased. 3. Theaverage dry matter, IVDDM and CP yields of oats harvested May 29 were 2,960, 2,435 and 572 kg per ha, respectively with the late maturing cultivar. Cayuse. while the early maturing cultivar, Speed oat, recorded 3,255, 2.298 and 475 kg per ha, respectively. No significant dry matter yield differences were found among the different seeding dates of March 15, 22 and 29 for the two oat cultivars. but a significant yield decrease was found from April 5 seeding. No interactions in dry matter yield were observed between oat cultivars and seeding dates. 4. Maximum Leaf area index (LAI) and Leaf area index duration (LAID) were observed with earlier seeding and the LA1 of Cayuse cultivar was twice or three times as much as that of Speed oat cult~var as the growth progresses. 5. As the seeding date was earlier. the Crop growth rate (CGR) of the late maturing cultivar, Cayuse. was increased continuously. but that of the early maturing cultivar, Speed oat, was declined after May 29. This trend was also found on the Net assimilation rate (NAR) of Speed oat cultivar. The present experiment indicates that spring oats can be successfully produced as forages by seeding in March with early maturing cultivars.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.31 no.4
• /
• pp.395-408
• /
• 2011

The study which it sees exclusions the copper and the zinc which contain in pig sludge, It study pig sludge resources fertilizer production which are rational, pig sludge resources fertilizers after seeding, silage corn it investigates growth characteristics and forage value, the result which investigates pig sludge resources fertilizers effectiveness with afterwards is same. With fertilizer ingredients in pig sludge chemical qualities, the content of the nitrogen and the phosphoric acid comes 4.4% to be 6.29%, pH 7.02 and content of the copper and the zinc which is a heavy metal which contains in pig sludge with 805 mg/kg and 1,704 mg/kg, it is a restrictive standard of the fertilizer, 300 mg/kg and 900 mg/kg it sees to be high, it manufactures citric acid 1 hydrate with the organic acid solution, heavy metals of pig sludge where it is a mixture ratio of the organic acid solution, it divides to 25%, 50%, 75% and 100% 4 kind levels, the result which measures the heavy metal exclusion ratio of the copper and the zinc, the mixture ratio of the organic acid solution to be many exclusion ratio of the copper and the zinc is showing a just interrelation, from organic acid solution 100% level content of pig sludge remains copper and zinc 330.03 mg/kg and 41.28 mg/kg, it shows the exclusion ratio of copper 59% zinc 97%. 'Cheonganok' growth characteristics with citric acid 1 hydrate, Treatment 2 and control growth characteristics etc, it exclusion the copper and the zinc it doesn't appear on significant difference statistically but, treatment 3 after only pig sludge in resources disposal where it seeding, growth characteristics of leaf area etc. is badness, it compares in control and treatment 2 the growth characteristics badness, it is appearing, it is caused by with disease and insects occurrence of $Ostrinia$ $furnacalis$ and brown spot, the damage was many. From forage value, Treatment 2 where it exclusion the heavy metal with the citric acid 1 hydrate with control it compares and there are not significant difference from crude protein and ADF and NDF contents etc., seeding only Pig Sludge in resources disposal treatment 3, it is caused by with $Ostrinia$ $furnacalis$ etc., trunk and aging of the leaf to be high ADF content is low. but from crude protein, the nitrogen ingredient which pig sludge has and interrelation it seemed and high numerical value were confirmed.

• Journal of the Korea Institute of Building Construction
• /
• v.9 no.4
• /
• pp.119-129
• /
• 2009

Building construction trends have been changed dramatically in terms of size and mass. With the need to maximize land usage, there has been an increase in the construction of high-rise buildings. This affects not only the entire construction duration and cost, but also subsequent construction activities, such as work to increase underground facilities and in reclamation land area construction. These types of site conditions require soft ground reinforcement and the proper uplift water pressure treatment. In general, two kinds of methods have been used for uplift water pressure treatment systems. However, there have been some problems arising as the result of a lack of research and analysis on underground construction techniques, and a reliance on experiments over actual survey and analysis of site conditions. This paper focused on the problems of conventional selection procedure, by analyzing drawings and proposing a kind of modeling for a reasonable procedure. The results were applied to OO project as a sample construction case to be verified in this research. The initial plan in the case project was the Rock Anchor System. However, as there were terrible miscalculations of basic site conditions that had an extraordinary influence on the underground water level, such as the site's proximity to the Han-river, it was necessary to change the plan to include apermanent drainage system. This achieved a direct construction cost reduction \ 406,702,000 and a maximum sayings of 4% of operational cost, based on the 50-year building Life Cycle Cost.

• Journal of the Korean Society of Radiology
• /
• v.4 no.1
• /
• pp.5-9
• /
• 2010

In recent, a digital x-ray detector attracted worldwide attention and there are many studies to commercialize. There are two methods in digital x-ray detector. This method is an Indirect method and Direct method. This study is to see the differences between the digital x-ray detector based on a-Se used in the existing indirect conversion method and an x-ray conversion material that has better SNR(Signal-to-noise ratio) and property than the a-Se. To solve the problem that is difficult to make a large area film using Screen-Print method, we used a Screen-Print method. In this study, we used a polyclystal $HgI_2$ as x-ray conversion material and a sample thickness is $150{\mu}m$ and an area is $3cm{\times}3cm$. ITO(Indium-Tin-Oxide) electrode was used as top electrode using a Magnetron Sputtering System and each area is $3cm{\times}3cm$, $2cm{\times}2cm$ and $1cm{\times}1cm$ and then we evaluated darkcurrent, sensitivity and SNR of the $HgI_2$ film are measured, then we evaluated the electrical properties. And we used a current integration mode when I-V test. This experiment shows that the sensitivity increases in accordance with the area of the electrode but the SNR is decreased because of the high darkcurrent. Through fabricating of various thicknesses and optimal electrodes, we will optimize SNR in the future work.

• Pediatric Infection and Vaccine
• /
• v.16 no.1
• /
• pp.40-46
• /
• 2009

Purpose : The purpose of this study was to identify useful predictors for diagnosing bacterial meningitis and performing CSF studies in febrile infants three months or younger. Methods : Six hundred and fifty two febrile infants with a rectal temperature ${\geq}38.0^{\circ}C$ presented from January 2003 to April 2008 and were retrospectively studied. The total white blood cell count (WBC), band count, absolute neutrophil count (ANC), quantitative C-reactive protein (CRP) and blood cultures were performed on admission. The clinical variables associated with bacterial meningitis were analyzed. Results : In patients with bacterial meningitis, the clinical variables including CRP (P=0.036), band count (P=0.037), ANC (P=0.036) and age (P=0.001) were significantly different. The area under the receiver-operating characteristic curve was 0.969 for CRP, 0.946 for the band count, 0.765 for the ANC and 0.235 for age. A CRP cutoff point of 8 mg/dL was determined to maximize both the sensitivity and specificity (sensitivity 83%, specificity 95%, likelihood ratio 16.6). A CRP concentration of <7 mg/dL "ruled-out" bacterial meningitis, with a likelihood ratio of 0.17, a posttest probability of <0.1% and negative predictive value 91%. A CRP concentration greater than 9 mg/dL had a much higher likelihood ratio (20.1) than the band count (16.6) and ANC (2.2). Conclusion : The CRP concentration was a useful laboratory test for the differential diagnosis of bacterial meningitis among febrile infants three months of age or younger. A CRP concentration of <7 mg/dL effectively ruled out bacterial meningitis; a value ${\geq}9mg/dL$ increased the clinical suspicion of bacterial meningitis and the need for CSF evaluation.

• Horticultural Science & Technology
• /
• v.34 no.1
• /
• pp.67-76
• /
• 2016

This study was conducted to examine the optimal environmental condition for promoting the growth of sowthistle as affected by light quality and photoperiod in a closed-type plant production system. Seeds were sown in 240-cell plug trays and then germinated for 3 days at a 24-hour photoperiod in a closed-type plant production system with LED lights (R:B:W = 8:1:1). Seedlings were transplanted and grown under 3 types of LED (R:B:W = 8:1:1, R:W = 3:7, or R:B = 8:2) and 4 photoperiods (24/0, 16/8, 8/16, or 4/20 hours) with $230{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ light intensity at a density of $20cm{\times}20 cm$. The experimental design was a randomized complete block design. Plants were cultured for 40 days un der the condition of $21{\pm}2^{\circ}C$ and $70{\pm}10%$ relative humidity after transplanting. Plants were fed with a recycling nutrient solution (pH 7.0 and EC $2.0dS{\cdot}m^{-1}$) contained in a deep floating tank. Fresh weight and dry weight of shoot or root, leaf length, and leaf area were the greatest in the photoperiod of 24/0 (light/dark) with RW LED. The highest number of leaves occurred in the photoperiod of 16/8 (light/dark) with RB LED, while the incidence of tip burn was higher in the photoperiod of 24/0 (light/dark) compared to the other treatments. Chlorophyll value was the highest in the 16/8 (light/dark) photoperiod and there was no significant difference by light quality. Chlorophyll fluorescence was the lowest in the photoperiod of 24/0 (light/dark) compared with other treatments. Therefore, in terms of economic feasibility and productivity for Ixeris dentata Nakai cultivation in a closed-type plant production system, the results obtained suggest that plants grew the best when kept in a photoperiod of 16/8 (light/dark) and light quality of combined LED RW (3:7).

• Resources Recycling
• /
• v.15 no.4 s.72
• /
• pp.3-12
• /
• 2006

The feasibility for the employment of manganese nodule as an adsorbent for $SO_{2}$ gas has been investigated. The specific surface area of manganese nodule particle, which used in the experiments, was ca. $221.5m^{2}/g$ and the content of sulfur in manganese nodule was observed to significantly increase after $SO_{2}$ was adsorbed on it. The EPMA for the distilled water-washed and methanol-washed manganese nodule particle after $SO_{2}$ adsorption showed that its sulfur content was slightly decreased to 14.7% and 13.1% respectively, from 15.4% before washing. The XRD analysis of manganese nodule showed that todorokite and birnessite, which are manganese oxides, and quartz and anorthite were the major mineralogical components and weak $MnSO_{4}$ peaks were detected after $SO_{2}$ was adsorbed on manganese nodule. For an comparative investigation, limestone was also tested as an adsorbent for $SO_{2}$, however, no peaks for $CaSO_{4}$ were found by XRD analysis after the adsorption of $SO_{2}$. As the size of adsorbent increased, time for breakthrough was decreased and the adsorbed amount of $SO_{2}$ was also diminished. The $SO_{2}$ adsorption was hindered when its flow rate became high and the adsorption capacity of manganese nodule was observed to be superior to that of limestone. In addition, the mixture of manganese nodule and limestone did not show an increase in the adsorption of $SO_{2}$. Finally, as the temperature was raised, the adsorbed amount of adsorbate on manganese nodule was found to be decreased.

• Journal of Legislation Research
• /
• no.44
• /
• pp.343-386
• /
• 2013

"Financial ADR" system in South Korea can be represented by so-called "Financial Dispute Resolution System", in which Financial Supervisory Service (FSS) and Financial Dispute Resolution Committee are the principal actors in operation of the system, and this is discussed as an "Administrative Financial ADR System". The system has over 10-year history since it was introduced in around 1999. Nonetheless, it was not until when financial consumer protection began to be highlighted after the 2008 financial crisis that Financial ADR system actually started to draw attention in Korea. This was because interest has been rising in "Alternative Dispute Resolution (ADR)" as an institutional measure to protect financial consumers damaged via financial transactions. However, the current discussion on the domestic Financial ADR system shows an aspect that it is confined to who is to be a principal actor for the operation of Financial ADR institution with main regards to reorganization of supervisory system. This article aims to embody these facts in an institutional model by recognizing them as a problem and analyzing the features of the Financial ADR system, thereby clarifying problems of the system and presenting the direction of improvement. The Korean Financial ADR system can be judged as "administrative model integrated model consensual model quasi-judicial model non-prepositive Internal Dispute Resolution (IDR) model". However, at the same time, it is confronted with a task to overcome the two problems; the system is not equipped with institutional basis for securing its validity in spite of the adopted quasi-judicial effect model; and a burden of operating an integrated ADR system is considerable. From this perspective, the article suggests improvement plans for security of validity in the current system and for expansion of industry-control ADR system, in particular, a system of prepositive IDR model. Amongst them, it suggests further plans for securing the validity of the system as follows; promotion to expand the number of internal persons and to differentiate mediation procedures and effect; a plan to keep a financial institution from filing a lawsuit before an agreement recommendation or a mediation proposal is advised; and a plan to grant suspension of extinctive prescription as well as that of procedures of the lawsuit.

• Clean Technology
• /
• v.27 no.4
• /
• pp.332-340
• /
• 2021

With the recent reinforcement of emission standards, it is necessary to make efforts to reduce NOx from air pollutant-emitting workplaces. The NOx reduction method mainly used in industrial facilities is selective catalytic reduction (SCR), and the most commercial SCR catalyst is the ceramic honeycomb catalyst. This study was carried out to reduce the NOx emitted from steel plants by applying De-NOx catalyst coated on metallic monolith. The De-NOx catalyst was synthesized through the optimized coating technique, and the coated catalyst was uniformly and strongly adhered onto the surface of the metallic monolith according to the air jet erosion and bending test. Due to the good thermal conductivity of metallic monolith, the De-NOx catalyst coated on metallic monolith showed good De-NOx efficiency at low temperatures (200 ~ 250 ℃). In addition, the optimal amount of catalyst coating on the metallic monolith surface was confirmed for the design of an economical catalyst. Based on these results, the De-NOx catalyst of commercial grade size was tested in a semi-pilot De-NOx performance facility under a simulated gas similar to the exhaust gas emitted from a steel plant. Even at a low temperature (200 ℃), it showed excellent performance satisfying the emission standard (less than 60 ppm). Therefore, the De-NOx catalyst coated metallic monolith has good physical and chemical properties and showed a good De-NOx efficiency even with the minimum amount of catalyst. Additionally, it was possible to compact and downsize the SCR reactor through the application of a high-density cell. Therefore, we suggest that the proposed De-NOx catalyst coated metallic monolith may be a good alternative De-NOx catalyst for industrial uses such as steel plants, thermal power plants, incineration plants ships, and construction machinery.