• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.9
• /
• pp.39-48
• /
• 2008

Recently, many multimedia services have emerged in Internet such as real-time and non- real time services. However, in this Internet environment, we have some limitations to satisfy each service feature. To guarantee the service features in Measurement-Based Admission Control(MBAC) based system on the flow-aware network, there is the method applying Dynamic Priority Scheduling(DPS) algorithm that gives a higher priority to an earlier incoming flow in all of the link bandwidth. This paper classifies all flows under several groups according to flow characteristics on per-flow MBAC algorithm based system. In each flow group, DPS algorithm is applied. This paper proposes two methods that are a DPS based bandwidth borrowing method and a bandwidth dynamic allocation method. The former is that if low priority class has available bandwidths, the flow of high priority class borrows the bandwidth of low priority class when high priority flow has insufficient bandwidth to connect a flow call. The later is that the each group has a minimum bandwidth and is allocated the bandwidth dynamically according to the excess rate for available bandwidth. We compare and analyze the characteristics of the two proposed methods through the simulation experiments. As the results of the experiment, the proposed methods are more effective than existing DPS based method on the packet loss and delay characteristics. Consequently the proposed two methods are very useful in various multimedia network environments.

• Journal of Korea Multimedia Society
• /
• v.25 no.10
• /
• pp.1404-1415
• /
• 2022

The 2-dimensional arrangement method of nodes has been used in most of RF (Radio Frequency) based communication network simulations. However, this method is not useful for the an none-obstacle 3-dimensional space networks in which the propagation delay speed in communication is very slow and, moreover, the values of performance factors such as the communication speed and the error rate change on the depth of node. Such a typical example is an underwater communication network. The 2-dimensional arrangement method is also not useful for the RF based network like some WSNs (Wireless Sensor Networks), IBSs (Intelligent Building Systems), or smart homes, in which the distance between nodes is short or some of nodes can be arranged overlapping with their different heights in similar planar location. In such cases, the 2-dimensional network simulation results are highly inaccurate and unbelievable so that they lead to user's erroneous predictions and judgments. For these reasons, in this paper, we propose a method to place uniformly and randomly communication nodes in 3-dimensional network space, making the wireless link with neighbor node possible. In this method, based on the communication rage of the node, blocks are generated to construct the 3-dimensional network and a node per one block is generated and placed within a block area. In this paper, we also introduce an algorithm based on this method and we show the performance results and evaluations on the average time in a node generation and arrangement, and the arrangement time and scatter-plotted visualization time of all nodes according to the number of them. In addition, comparison with previous studies is conducted. As a result of evaluating the performance of the algorithm, it was found that the processing time of the algorithm was proportional to the number of nodes to be created, and the average generation time of one node was between 0.238 and 0.28 us. ultimately, There is no problem even if a simulation network with a large number of nodes is created, so it can be sufficiently introduced at the time of simulation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.4B
• /
• pp.298-307
• /
• 2002

This paper concentrates on developing and analyzing an advanced space-time multiuser receiver for WCDMA forward link. Through exploring the interference caused by co-channel users and delayed multipaths in CDMA, a constrained linear adaptive filter is adopted to cancel the interference. Furthermore, by utilizing the space-time diversity, an optimum diversity receiver, called a constrained adaptive space-time interference canceller (C-ASTIC), is proposed. For comparison, the statistical analysis of multiuser performance for WCDMA system with space-time diversity is described. The result of the simulation showed that C-ASTIC performs better than both the space-time diversity combining maximal ratio combiner (MRC) and the single-antenna adaptive interference canceller in a multipath fading channel. Also, the efficiency of the C-ASTIC in the multimedia communication environment is investigated under the multiuser, multi-transmit antenna, and multirate WCDMA system in a multipath fading channel. From the results, the C-ASTIC was validated to be useful for multi-rate WCDMA system through improving the performance gain by more than 3 dB at BER of 10$\^$-3/ in a half or more loaded system.

• The Journal of Information Technology and Database
• /
• v.2 no.2
• /
• pp.25-34
• /
• 1995

In this paper, we present design philosophy and implementation issues of a functionality testing tool for object-oriented database systems. A testing tool has been developed to validate UniSQL/X functionalities with C++ interface. A testing tool is designed under consideration of scaleability, simplicity and extendibility. The schema is deliberately constructed to verify the object-oriented functionalities such as abstraction, inheritance and aggregation. Each test item has been derived under various black box techniques such as equivalent partitioning and boundary-value analysis. The testing tool consists of six phases, namely, database creation, database population, construction of testindex, compilation and link, execution and result reporting, and final cleanup. The prototype provides more than 140 test items at 90 programs.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.11 no.3
• /
• pp.209-215
• /
• 2006

Now, in this paper, going to present you with an Idea related to a new inverter of multi-step voltage source, that Is, the double-connected 12-step inverter with an auxiliary circuit. It possibly can be 24-step inverter with 3-phase voltage source which will enable us make full application even to medium and high power-level Motor drive, UPS, STATCOM, SVC, etc. in which the PWM method could not be employed. 24-step operation can be obtained from the link between the existing 12-step inverter and the additional auxiliary circuit in which the transformer of auxiliary circuit generates ripple voltage delivered to the inverter. Through a lot of experiments and simulations, (from which the validity of this scheme is confirmed,) we came to the conclusion that the increase of the primary winding number on transformer by 2N(N=1,2,3....) leads to the 12M-step(M=2,3,4...) inverter. The validity of the proposed scheme is confirmed by the simulated and experimental results.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.4
• /
• pp.36-42
• /
• 2008

40Gb/s CMOS Clock and Data Recovery circuit design for optical serial link is proposed. The circuit generates 8 multiphase clock using LC tank PLL and controls the phase between the clock and the data using the $2{\times}$ oversampling Bang-Bang PD. 40Gb/s input data is 1:4 demultiplexed and recovered to 4 channel 10Gb/s outputs. The design was progressed to separate the analog power and the digital power. The area of the chip is $2.8{\times}2.4mm^2$ for the inductors and the power dissipation is about 200mW. The chip has been fabricated using 0.18um CMOS process. The measured results show that the chip recovers the data up to 9.5Gb/s per channel(Equivalent to serial input rate of up to 38Gb/s).

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.159-163
• /
• 2009

CAT(Catchment hydrologic cycle Analysis Tool)은 기존 개념적 매개변수 기반의 집중형 수문모형과 물리적 매개변수 기반의 분포형 수문모형의 장점을 최대한 집약하여, 도시유역 개발 전 후의 장 단기적인 물순환 변화 특성을 정량적으로 평가하고 물순환개선시설의 효과적인 설계를 지원하기 위한 물순환 해석 모형이다. CAT은 수문학적으로 균일하게 판단되는 범위를 소유역으로 분할하여 지형학적 요인에 의한 유출 특성을 객관적으로 반영할 수 있으며, 개발 공간 단위별로 침투, 증발, 지하수 흐름 등의 모의가 가능하도록 하는 Link-Node 형식으로 개발되었다. 모형의 UI(User Interface)는 사용자가 손쉽게 모형을 적용 관리하고, 여러 시나리오를 동시에 효과적으로 모의하여 분석할 수 있도록 설계되었다. 또한 모든 입력 출력 자료를 Excel이나 텍스트 형식과 연동되도록 하여 프로젝트별 매개변수 관리가 용이하도록 개발하였다. CAT의 수문해석모듈로 증발산, 침투, 유역 유출, 지하수 유거, 하도추적 등의 모듈을 개발하였다. 증발산은 기준 증발산을 외부에서 직접 입력하거나, Penman-Monteith 방법을 선택할 수 있으며, 침투는 토양의 수리전도도에 따른 연직방향 침투 및 사면방향 복귀류를 고려할 수 있다. 노드의 지하수 유거를 고려하여 기존 노드-링크 방식 모형의 장기 유출 해석시 제한점을 보완하였으며, 하도추적을 위해 Muskingum, Muskingum-Cunge, Kinematic wave 방법 등의 해석법을 제공하였다. CAT의 수문모듈을 이용하여 설마천 유역을 단일노드 및 멀티노드로 개념화하여 모의하였으며, 모의결과를 관측유량과 비교한 결과, 두 경우 적절한 범위내의 결과임을 확인할 수 있었다. CAT의 안정적인 수문해석 기능을 바탕으로 향후 물순환개선시설 모듈과의 결합을 통해 장기 물순환 해석에 광범위하게 활용될 수 있을 것으로 판단된다.

• The KIPS Transactions:PartC
• /
• v.12C no.5 s.101
• /
• pp.717-724
• /
• 2005

In this paper, we Propose an efficient scheduler well suited for the next-generation wireless networks that can support multimedia traffic having various requirements. The scheduler is designed to provide each of multimedia classes with differentiated services. In particular, the scheduler is intended to maximize throughput and minimize packet loss ratio. To apply the scheduler, we suppose that the wireless network is based on TDD/CDMA system The scheduler assigns a packet in a dedicated uplink-slot to the user within a frame to operate scheduling of packets transmitted by the users belonging to the specific class in an efficient manner. Such a manner also enables the scheduler to meet different QoS requirements. The paper also includes performance comparison with other schemes and analysis of the proposed scheduling algorithm by using simulation. We also analyze the proposed scheme by using simulation. The simulation compares the proposed scheduling algerian with previously proposed schemes in terms of the performance.

• Journal of Internet Computing and Services
• /
• v.9 no.5
• /
• pp.153-163
• /
• 2008

Almost literature has so far proposed the modifications to IEEE 802.11 DCF MAC protocol to improve system throughput and average delay. Jitter(variance in packet delays) is, however, considered as an important QoS parameter for real-time streaming service which is popularized increasingly. Unfortunately, legacy access protocol for WLAN can't support the jitter. This paper proposes two schemes modifying the DCF MAC protocol to reduce the average value of jitter for multimedia frames arrived at received nodes. The one scheme, referred to as DCW-DCF(Decreasing Contention Window-DCF), reduces CW(Contention Window) size by half whenever a transmitted frame collided against other frames and back-off happens. Also, it increase initial CW size according as the link utilization and the collision probability increase. The other scheme, referred to as D-DIFS(Differential-DIFS), assigns different values to DIFS. That is, the DIFS interval is deceased as the number of back-off for a frame increases. In this paper, the two schemes are evaluated through simulation using ns2 and simulation results show that the proposed schemes are effective for improving the jitter property of standard WLAN.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.6B
• /
• pp.1165-1173
• /
• 1999

In order to support various multimedia communication services, a well balanced backbone network should be designed using recently advanced optical communication technologies. In this paper an optimal backbone network configuration design is presented fur Korean traffic environment. A new traffic model, Population-Distance-Gross Group Products(PDG) traffic model, is devised. In Korean network traffic environment, six regional centers are selected, link capacities between the regional centers are estimated from the PDG traffic model, and the overall network configuration is designed for the all-optical backbone network in Korea. A simulation study is carried out to verify the desired performance of the designed backbone network. Simulation results show that performance of the backbone network is well balanced to support various communication services in Korea in the 2000s.