• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.5
• /
• pp.55-59
• /
• 2014

Multi-band and multi-mode transmitters are needed for SDR and CR. Recently many types of polar transmitters have been studied in order to implement a multi-band and multi-mode transmitter. Polar transmitters have many advantages, such as a simple structure, high efficiency and etc. In this paper we consider the number of D/A bit and the effects of a delay mismatch as design parameters for implementing polar transmitters. From the simulation we know that a 10 bit D/A is sufficient and a delay mismatch must be maintained small than 1/64 chip for satisfying the spectrum mask characteristics. We implement a polar transmitter based on the design parameters and the measured output signal meet the spectrum mask of 800MHz CDMA.

• The Magazine of the IEIE
• /
• v.30 no.4
• /
• pp.422-422
• /
• 2003

본 논문에서는 기존의 기지국과 W-CDMA 시스템을 상호 연동하기 위한 SDR(Software Defined Radio) 기반의 멀티 밴드 디지털 IF 모듈 구현에 대해 소개한다. 하드웨어 플랫폼상에 테스트 및 시험 검증하기 위해서 크게 광대역 ADC, DAC, FPGA로 구성하였으며, FPGA 내에 디지털 필터 및 NCO 등의 응용 소프트웨어는 VHDL로 코딩하였다. 디지털 필터는 FPGA의 허용 자원을 고려하여 인터폴레이션 및 데시메이션을 위한 폴리페이즈 필터 뱅크로 구현하였다. 또한 송신단에서는 이미지 성분을 제거하기 위해 2단의 DCQM(Digital Complex Quadrature Modulation)을 적용하였으며, 이때 적용되는 NCO(Numerically Controlled Oscillator)는 1/4주기의 LUT를 사용하여 설계하였다. 수신단에서는 IF 단에 SAW 필터를 사용하지 않기 때문에 W-CDMA의 블록커 규약에 준하면서 근접 채널을 제거하기 위한 고출력의 감쇄 특성을 갖는 필터를 설계하였다. 본 논문에서는 컴퓨터 시뮬레이션 결과와 스펙트럼 분석기를 통해 측정된 결과를 비교 분석하였으며 이에 대한 디지털 IF 모듈의 성능을 검증하였다.

• The Magazine of the IEIE
• /
• v.30 no.4
• /
• pp.76-88
• /
• 2003

본 논문에서는 기존의 기지국과 W-CDMA 시스템을 상호 연동하기 위한 SDR(Software Defined Radio) 기반의 멀티 밴드 디지털 IF 모듈 구현에 대해 소개한다. 하드웨어 플랫폼상에 테스트 및 시험 검증하기 위해서 크게 광대역 ADC, DAC, FPGA로 구성하였으며, FPGA 내에 디지털 필터 및 NCO등의 응용 소프트웨어는 VHDL로 코딩하였다. 디지털 필터는 FPGA의 허용 자원을 고려하여 인터폴레이션 및 데시메이션을 위한 폴리페이즈 필터 뱅크로 구현하였다. 또한 송신단에서는 이미지 성분을 제거하기 위해 2단의 DCQM(Digital Complex Quadrature Modulation)을 적용하였으며, 이때 적용되는 NCO (Numerically Controlled Oscillator)는 1/4주기의 LUT를 사용하여 설계하였다. 수신단에서는 IF 단에 SAW필터를 사용하지 않기 때문에 W-CDMA의 블록커 규약에 준하면서 근접 채널을 제거하기 위한 고출력의 감쇄 특성을 갖는 필터를 설계하였다. 본 논문에서는 컴퓨터 시뮬레이션 결과와 스펙트럼 분석기를 통해 측정된 결과를 비교 분석하였으며 이에 대한 디지털 IF 모듈의 성능을 검증하였다.

• Journal of Korea Multimedia Society
• /
• v.11 no.2
• /
• pp.153-162
• /
• 2008

We propose a novel image inpainting method composed of two parts: band matching and seamless cloning. In band matching, a band enclosing the boundary of a missing region is compared to those from the other parts of the image. The inner area of the minimum difference band is then copied to the missing region. Even though this band matching results in successful inpainting in many practical applications, brightness discontinuity (a seam) may appear between the filled missing region and its neighborhood. We apply seamless cloning to remove such discontinuity between the two regions. However, since this basic method using one patch may not deal with cases where there are abrupt changes of color or brightness along the boundary, we furthermore devise one more step: target sub-division. The target area is subdivided into small sub-areas, and the band matching and seamless cloning are applied to each of them. The multiple results from the sub-division are then ordered according to inpainting quality, which is measured based on the edge map or discontinuity map along the boundary band.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.17 no.7
• /
• pp.957-963
• /
• 2007

In this paper, Nonlinear Autoregressive (NAR) method based on Least Square-Support Vector Regression (LS-SVR) is introduced and tested for nonlinear sustained vowel modeling. In the database of total 43 sustained vowel of Benign Vocal Fold Lesions having aperiodic waveform, this nonlinear synthesizer near perfectly reproduced chaotic sustained vowels, and also conserved the naturalness of sound such as jitter, compared to Linear Predictive Coding does not keep these naturalness. However, the results of some phonation are quite different from the original sounds. These results are assumed that single-band model can not afford to control and decompose the high frequency components. Therefore multi-band model with wavelet filterbank is adopted for substituting single band model. As a results, multi-band model results in improved stability. Finally, nonlinear sustained vowel modeling using NAR based on LS-SVR can successfully reconstruct synthesized sounds nearly similar to original voiced sounds.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.2
• /
• pp.24-32
• /
• 2003

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 2004.07a
• /
• pp.439-439
• /
• 2004

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.5
• /
• pp.1645-1653
• /
• 2014

In general, RGB, NIR, and thermal images are used for obtaining geospatial data. Such multiband images are collected via devices mounted on satellites or manned flights, but do not always meet users' expectations, due to issues associated with temporal resolution, costs, spatial resolution, and effects of clouds. We believe high-resolution, multiband images can be obtained at desired time points and intervals, by developing a payload suitable for a low-altitude, auto-piloted UAV. To achieve this, this study first established a low-cost, high-resolution multiband image collection system through developing a sensor and a payload, and collected geo-referencing data, as well as RGB, NIR and thermal images by using the system. We were able to obtain a 0.181m horizontal deviation and 0.203m vertical deviation, after analyzing the positional accuracy of points based on ortho mosaic images using the collected RGB images. Since this meets the required level of spatial accuracy that allows production of maps at a scale of 1:1,000~5,000 and also remote sensing over small areas, we successfully validated that the payload was highly utilizable.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.37 no.9
• /
• pp.11-23
• /
• 2000

Multicarrier DS-CDMA is an effective approach to realize wideband CDMA system in a multipath fading channel. In this paper, we propose a convolutionally-coded overlapped multicarrier DS-CDMA system, and analyze the performance with subband overlapping variation to determine the overlapping percentage showing best performance. Given a total number of subcarriers M*R, we will show that the BER variation is highly dependent on the rolloff factor P of raised-cosine chip wave-shaping filter irrespective of convolutional encoding rate I/M and repetition coding rate 1/R. We also analyze the possibility of reduction in total MUI by considering both variation of a rolloff factor (0 ($\beta$ :1) and variation of subband overlapping factor (0 ( A :2), and show that the proposed system may outperform the multicarrier DS-CDMA system in [1, 12].

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.9C
• /
• pp.1306-1315
• /
• 2004

UWB, which is now in a process of being standardized in WPAN communication, has some problems such as difficulty of implementation and interference with existing systems. To overcome these problems we will explain the MIMO structure to alleviate difficulties of implementation. In this paper we propose the UWB transceiver structure using multiband scheme to mitigate narrow band interference from PCS Of WLAN which is widely used these days and analyze the effect of noise and narrow band interference by simulation based on numerical analysis.