• Korean Journal of Soil Science and Fertilizer
• /
• v.17 no.2
• /
• pp.134-140
• /
• 1984

Field study was conducted to investigate the effect of sewage sludge application in paddy soil 1. Sewage sludge was available as source of nitrogen fertilizer. 2. Optimum amounts of sewage sludge application were 450kg/10a at the fertilizer (N-P-K) level of 7.5-10-10kg/10a and 350kg/10a at that of 15-10-10kg/10a. 3. Tillers, panicles and nitrogen content in rice plant were increased but percentage of ripeness was decreased with amounts of sewage sludge and/or chemical fertilizer. 4. Nitrogen utilizations were 25 and 18% at the level of 7.5-10-10 and 15-10-10kg/10a as fertilizer (N-P-K). On the other hand, maximum utilization of sewage sludge applied with fertilizer was near to 18%. Sewage sludge application without fertilizer was 16% of nitrogen maximum utilization and its utilization increased with amounts of sewage sludge application.

• Korean Journal of Food Science and Technology
• /
• v.32 no.5
• /
• pp.1029-1034
• /
• 2000

A suitable method of sample treatments to minimize the analytical interferences was presented in order to determine bisphenols [bisphenol F (BPF), bisphenol A (BPA), bisphenol F diglycidyl ether (BFDGE), and bisphenol A diglycidyl ether (BADGE)] in various canned beverages coated with epoxy resin by the reversephase high performance liquid chromatography (RP-HPLC) equipped with a fluorescence detector and the gas chromatography with mass selective detection. The recovery test of bisphenols was performed using 1, 5, and 10 ${\mu}g/L$ bisphenols spiked beverages with the combined technique of the solid-phase extraction (SPE) and the liquid-phase extraction (LPE). Both BPA and BADGE showed quite adequate resolutions in HPLC-chromatograms. The recoveries of BPA obtained by LPE with diethyl ether were higher than those obtaind with methylene chloride on coffee, shikhye and fruit juice. For cola and tea, the recoveries of BPA obtaind by SPE were higher than those by LPE with diethyl ether. The recoveries of BADGE were less than those of BPA for all beverage samples treated by either SPE or LPE method. In survey of bisphenols for eighteen commercial canned beverage samples, BPA contents of coffee, cola, tea, shikhye, and fruit juice were in the range of $1.3{\sim}11.6,\;0.5{\sim}0.9,\;1.0{\sim}1.3,\;2.4{\sim}7.9$, and $3.0{\sim}3.4\;{\mu}g/L$, respectively, but there was no detection of BPA in beer sample.

• Korean Chemical Engineering Research
• /
• v.59 no.4
• /
• pp.542-547
• /
• 2021

Glass lined impellers are corrosion resistant to most chemicals, including strong acids, and also have a smooth, non-stick surface, easy to clean and free from impurities in the process. Glass lined home base impeller is a multi-purpose impeller designed to stir a wide viscosity range of liquids from low viscosity fluids to high viscosity fluids, among others, cell culture, yeast culture, and beer fermentation pots, especially used for air-water system breathable stirring. The glass lining for HB impellers, which are simple in structure and competitive in performance, is essential to have upper and lower division in order to make the joint area between the impeller and shaft as small as possible. The upper and lower division of the impeller hardly affects the mixing performance, but the aeration performance. In this study, in order to optimize the shape of the Glass Lining HB impeller, a study was conducted on the effect of the angle between the upper and lower impellers, the clearance between the impellers, and the number of baffles on the aeration power. The optimal shape and baffle plate conditions for the Glass lined HB impeller were derived through the study results that the angle and the clearance between the upper and lower impellers decreased the ration of the power consumption with aeration P_g and that without aeration P₀, P_g/P₀.

• Journal of the Korean Wood Science and Technology
• /
• v.32 no.5
• /
• pp.12-19
• /
• 2004

This study was performed to investigate the optimum condition of protease production from submerged culture of oak mushroom (Lentinula edodes, Sanlim No. 5) and its enzymatic features. Among several combinations of media, the combination of wheat bran, corn flour, water and corn oil (WB+CF+W+ CO) yielded 84.8 U/g of maximum protease activity. This combination of ingredients, in spite of not being particularly protein-rich in comparison to the other media, allowed for good growth of the fungus and maximal protease production. Comparison of different growth medium liquids indicated that demineralized water afforded the best growth of the fungus and the highest protease activity. Acetate buffer and acidified water negatively affected The protease production peaked around 72 hr of incubation, and decreased thereafter. The molecular weights of produced protease were about 45,000 by Sephadex G-75 chromatography. The pH optimum for protease activity was 4, while maximal activity incubated at 37℃ for 1 hr was observed between pH 4~6. The optimum temperature of this protease was 55℃, and the enzyme was active over a broad temperature range (30~60℃), indicating that this protease would be suitable for a wide range of applications where. different pH and temperature are necessary, such as digestive aids, food industry, beer and tannery industries.

• Journal of Life Science
• /
• v.33 no.2
• /
• pp.216-226
• /
• 2023

Since nylon 66, a polyamide resin, has been developed and applied to toothbrush bristles, plastic consumption has increased rapidly every year, along with the increase in the amount of plastic discarded. Among the various forms of plastic debris produced by the decomposition of plastics, microplastics with a size of less than 5 mm are widely distributed in the environment, which poses a threat not only to the environment but also to animals and humans. The pathway through which microplastics enter the human body is known as ingestion by water and food, inhalation from air, and skin contact. Microplastics introduced into the human body affect human health. Recently, food-related studies have begun to be reported among microplastics-related studies, and analyses of the presence of microplastics in processed foods, such as canned foods, dried seaweed, beverages, beer, milk, sugar, and honey, are underway. Here, we present trends in the production and consumption of plastics, the generation of microplastics, the route of human inflow and human risk, and the microplastics present in processed foods, which are limited but have recently been reported. Thus far, studies on microplastics and risk assessment in processed foods have been insufficient, but microplastics are gradually being recognized as a factor that affects the environment and food. Future studies are expected to have implications for regulations regarding microplastics present in processed foods.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.42 no.3
• /
• pp.263-269
• /
• 1997

To cope with increasing importance of water stress in food crop production, some physiological characteristics, their cultivar-differences and grain yield of winter barley cultivars in response to water stress during reproductive stages were studied employing three covered-barley cultivars, Milyang 12, Durubori, and Olbori, one naked-barley cultivar, Baegdong, and one two-row malting-barley cultivar, Hyangmaeg. The barley grown in pot-soil was conditioned for 10 days under water stress, varying the time of water stress : 20 days before heading, 10 days before heading and the time of heading. The decrease in growth due to water stress varied greatly with the cultivars and time of water stress. The greatest injury occurred when water stress was imposed for 10 days from 10 days before heading : the culm length of water-stressed plants have shown reduced by 85∼98％ of the non-stressed; the number of spikes per plant by 52∼83%; the number of grains per spike by 71∼86%; 1,000-grain weight by 80∼84%; yield per pot by 60∼94%. The number of spikes per plant as one of yield components was most sensitively affected. As a whole, the drought resistance of cultivars was high in the order of Olbori> Milyang 12 and Durubori> Hyangmaeg>Baegdong. On rewatering the plants after termination of the water stress treatment the recovery rate of free proline content and relative turgidity of flag leaf were higher in 3 covered-barley cultivars, and lower in cultivars Baegdong and Hyangmaeg.

• Korean Journal of Soil Science and Fertilizer
• /
• v.18 no.1
• /
• pp.50-57
• /
• 1985

An attempt was made to determine the optimum levels of sewage sludge application for seogwangbyeo in the farmer's field. 1. Optimum amount of sewage slude application was 338kg/11a at the fertilizer (N-P-K) level of 15-10-10kg/10a, 430kg/10a at that of 7.5-10-10kg/10a and 544kg/10a at no fertilizer. 2. Number of tillers during all growing period were increased with amounts of sewage sludge and/or chemical fertilizers. 3. Panicles per hill was increased but percent ripeness was decreased with the application of increasing level of sewage sludge and/or chemical fertilizer. In particular, the decrease of ripeness among yield-related components sotood out as an important one to be solved for higher yield. 3. Panicles per hill was increased but percent ripeness was decreased with the application of increasing level of sewage sludge and/or chemical fertilizer. In particular, the decrease of ripeness among yield-related components stood out as an important one to be solved for higher yield. 4. Ripeness was remarkably decreased in high nitrogen content of soil and rice plant under heavy amounts of sewage sludge and/or chemical fertilizer. 5. Ripeness that had direct effect on yield showed significantly possitive correlation with the content of $SiO_2$ and $SiO_2/N$ in rice plant from 25 days after transolanting to harvesting stage. 6. Maximumutillzation of nitrogen and its production efficiency of absorbed nitrogen in sewage sludge were 16.6% and 31.9kg (Yield/kg, N) at the level 15-10-10kg/10a as fertilizer with amounts of sewage sludge application, and 19.0% and 31.8kg (yield/kg, N) at sewage sludge application without fertilizer.

• Journal of radiological science and technology
• /
• v.37 no.4
• /
• pp.331-339
• /
• 2014

To test feasibility of proton arc therapy (PAT) in the treatment of para-aortic lymph node tumor and compare its dosimetric properties with advanced radiotherapy techniques such as intensity modulated radiation therapy (IMRT) and conventional 3D conformal proton beam therapy (PBT). The treatment plans for para-aortic lymph node tumor were planned for 9 patients treated at our institution using IMRT, PBT, and PAT. Feasibility test and dosimetric evaluation were based on comparisons of dose volume histograms (DVHs) which reveal mean dose, $D_{30%}$, $D_{60%}$, $D_{90%}$, $V_{30%}$, $V_{60%}$, $V_{90%}$, organ equivalent doses (OEDs), normal tissue complication probability (NTCP), homogeneity index (HI) and conformity index (CI). The average doses delivered by PAT to the liver, kidney, small bowel, duodenum, stomach were 7.6%, 3%, 17.3%, 26.7%, and 14.4%, of the prescription dose (PD), respectively, which is higher than the doses delivered by IMRT (0.4%, 7.2%, 14.2%, 15.9%, and 12.8%, respectively) and PBT (4.9%, 0.5%, 14.12%, 16.1% 9.9%, respectively). The average homogeneity index and conformity index of tumor using PAT were 12.1 and 1.21, respectively which were much better than IMRT (21.5 and 1.47, respectively) and comparable to PBT (13.1 and 1.23, respectively). The result shows that both NTCP and OED of PAT are generally lower than IMRT and PBT. This study demonstrates that PAT is better in target conformity and homogeneity than IMRT and PBT but worse than IMRT and PBT for most of dosimetric factor which indicate that PAT is not recommended for the treatment of para-aortic lymph node tumor.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.33 no.2
• /
• pp.339-348
• /
• 2004

This study was peformed to assess the relationships among bone mineral density (BMD), Physiological characteristics and lifestyle factors in 61 premenopausal working women aged 30∼49 y in Busan. The BMDs of the lumbar spines (Ll∼L4), femoral necks (FN), ward's triangles (WT) and trochanters (TC) were measured by dual energy X-ray absorptiometry. Data for physiological characteristics and physical activity was assessed by questionnaire and usual intakes of coffee, green tea, alcohol, Coca cola by food frequency questionnaire. The BMDs of L14, FN, WT and TC were 1.02 g/$\textrm{cm}^2$, 0.76 g/$\textrm{cm}^2$,0.69 g/$\textrm{cm}^2$ and 0.66 g/$\textrm{cm}^2$respectively The BMD of FN was assessed as osteopenia by T-score. The BMD of WT was positively correlated with age of monarch (p<0.05) and the BMD of Ll4 was positively correlated with delivery number (p<0.05). The BMD of Ll4 was positively correlated with hours of outdoor activity per weekend and week (p<0.05, p<0.05). The BMDs of FN and WT (p<0.05, p<0.05) were positively correlated with intake of green tea per month and the BMD of FN (p<0.05) was positively correlated with intake of wine per month. But the BMD of Ll (p<0.05) was negatively correlated with intake of Coca cola per month. So nutritional education for increasing hours of outdoor activity and decreasing intake frequency of beverage contributing to diminishment of bone mineral density is needed for premenopausal working women to prevent osteoporosis.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.34 no.4
• /
• pp.296-306
• /
• 2014

This study was conducted to survey and analyze the quantity of various organic wastes and to vitalize the utilization of agri-food by-products as raw materials for Total mixed ration (TMR), to improve feed cost savings and the quality of animal products. On-the-spot obstacles for animal farmers, along with legal and institutional alternatives are presented. The results are as follows. First, organic wastes in Korea are managed by the Allbaro system created in the Wastes Control Act, which processes 10,488 tons of cooking oil waste, 832,493 tons of animal and plant residues, 5,740 tons of animal carcasses, 1,171,892 tons of animal residues, and 2,172,415 tons of plant residues including 12,905 tons of rice hull and bran, for a total of 4,205,931 tons. Raw materials for TMR, namely rice hulls and bran as well as plant residues, accounted for 51.7% of the total national organic waste. The top 10 municipalities process 76~100% of all organic wastes and a supply management system is needed for the waste. Second, the 10 major agri-food by-products used as raw materials for TMR are bean curd by-product, rice bran, oil-cake, brewers dried grain, Distiller's Dried Grains with Solubles (DDGS), barley bran, soy sauce by-product, citrus fruit by-product, mushroom by-product and other food by-product (bread, noodles, snacks, etc.). Third, the biggest difficulties in using agri-food by-products are legal obstacles. Because agri-food by-products are regulated as industrial wastes by the Waste Control Act, animal farmers that wish to use them have legal reporting obligations including the installation of recycling facilities. To enable the use of agri-food by-products as raw materials for TMR, waste management system improvements such as 'the end of waste status' and the establishment of more than 10 public distribution centers nationwide are deemed essential.