• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.466-466
• /
• 2017

지하공간의 개발과 지하공간의 굴착으로 인한 지표수 및 지하수 시스템의 변화나 굴착면 주위의 지하수 유동 체계의 변화는 터널내로의 지하수 유입, 지표수 고갈을 가져온다. 또한 터널 상부의 지반에서 현지응력의 변화로 인한 지하수 유출은 지표침하, 하천수 및 계곡수 고갈을 발생시킬 수 있다. 그러나, 터널설계 시 비용 및 시간, 현장의 진입조건 등의 제약으로 상세한 지반조사의 실시가 이루어지지 않을 때가 있다. 또한, 터널 공사가 진행되는 중에는 공사기간과 공사비 때문에 별도의 지반조사를 하지 않는다. 그 대신에 터널 막장에서 실시하는 Face Mapping을 토대로 공사를 진행하며, 대규모 위험요소가 발견되지 않는 이상 별도의 비용과 시간을 투입하여 추가 지질 및 지반 조사를 실시하는 경우는 매우 드물다. 연구지역의 지질은 경상분지내 백악기 하양층군의 퇴적암류, 이를 관입/분출한 불국사화강암류 및 제3기 화산암류, 전기 에오세 연일층군에 대비되는 퇴적암류로 구성되어 있다. 이들을 피복하는 제4기 충적 퇴적층은 주로 단층곡과 동측 지괴의 선상지 및 하천을 따라 분포한다. 연구지역에는 폭 100 m 이상의 대규모 단층대가 발달하였으며 제4기 단층운동으로 인한 단층파쇄대가 존재한다. 퇴적암 분포지역에서는 반복층서가 관찰되며 소규모 단층, 단열, 변형띠 등이 연속적으로 발달해 있다. 본 연구에서는 터널공사에 의한 지하수 변화를 확인하기 위하여 현장추적자 시험과 수질분석 및 지하수 모델링을 실시하였다. 현장 수질 분석에 의한 지표수와 지하수 간의 수질의 차이를 보면, 알칼리도를 제외한 대부분의 수질 항목이 서로 유사성을 보인다. 전기전도도(EC), TDS, 알칼리도의 경우 지표수의 수원지에서 터널 내부로 유입이 일어나고 있다. 이는 터널 공사의 영향으로 판단되며, 현장에서 실시한 추적자 시험에서는 추적자의 이동 시간이 매우 빨라 지표 수원지로부터 지표수가 터널내부로 빠른 속도(10시간 이내)로 유입된다고 판단된다. 지하수 모델링 결과, 정상류 상태에서는 지하수가 북동쪽의 높은 고도에서 서남쪽의 낮은 고도로 흐르는 것으로 확인되며, 가뭄시에도 지하수 함양으로 지하수가 고갈되지는 않는 것으로 나타났다. 부정류 상태 모델링 결과, 일일 평균 $32.49m^3$의 지하수가 터널 내부로 유입되는 것으로 산정되었다. 이 양은 터널 내부뿐만 아니라 터널 공사 현장 주위로도 지하수 유출이 일어나고 있음을 지시한다.

• The Journal of Engineering Geology
• /
• v.15 no.3
• /
• pp.309-323
• /
• 2005

Dynamic stiffness of subsurface materials is one of the most important geotechnical parameters in predicting deformational behavior of structures as well as practicing seismic design and performance evaluation. In an effort to measure the parameter efficiently and accurately, various borehole seismic testing techniques have been, thus, developed and used during past several decades. Moreover, recent rush of underground-space projects and increasing size of structures put more stress on reliable site investigation techniques in estimating stiffness of rock mass. In this paper, a new technique called 'in-hole seismic test' has been implemented to measure the dynamic stiffness of rock masses at subsurface foundations and tunnel-faces. The reliance of in-hole seismic test was evaluated by comparing the testing results at several rock sites with those of other borehole techniques and the technique tunnls out to be an efficient and accurate in-situ testing technique.

• Tunnel and Underground Space
• /
• v.19 no.2
• /
• pp.132-145
• /
• 2009

Faults in rock mass have strong influences on the behaviors of rock structure such as rock slope, tunnel and underground space. Thus, it is very important to analyse for the characteristics of fault rocks in design for tunnel. But, due to the limitation of geotechnical investigation in design stages, tunnel engineers have to carry out the face mapping and additional geological survey during tunnel excavation to find the distribution of faults and the engineering properties of faults for support and reinforcement design of tunnel. In this study, various geological survey and field tests were carried out to analyse the characteristics of the large thrust fault zone through the large sectional tunnel is constructed in mica-schist region. Also, the distribution of structural geology, the shape of thrust faults and the mechanical properties of fault rock were studied for the reasonable design of the reinforcement and support method for the highly fractured fault zone in the large-span tunnel.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1998.04a
• /
• pp.47-60
• /
• 1998

It is considered in this paper that the main causes of tunnel collapse during the construction were the insufficiency of data of geotechnical investigations, or their limits due to special ground condition such as its heterogeneity and anisotropy It is thought that safety of ground can be affected by the geological conditions such as presences of discontinuities in good intact rocks, and considered to be necessary that awareness of the conditions of discontinuities in advance is important to apply adequate reinforcement measures. It is also shown that a serious accident had occurred because of the unawareness of the permeable alluvial deposits at the top of the tunnel. And it is shown that the example of application of the results of geotechnical investigation such as face-mapping, pilot boring etc. during tunnel construction, and a serious deformation of tunnel under special geological condition. Therefore, it is strongly recommended to perform an adequate geotechnical investigation to confirm the geotechnical conditons of ground before design, and supplimentary investigation is also needed depending on conditions for safe and econonic construction.

• Proceedings of the Korean Society for Rock Mechanics Conference
• /
• 2000.09a
• /
• pp.129-137
• /
• 2000

This paper presents groundwater flow characteristics in discontinuous rock mass using fracture network program(NAPSAC) by statistical approach. Equivalent permeability coefficients are estimated from borehole data around Mabuk test tunnel site and fracture map on the arch of the tunnel. The reliability of fracture network model is obtained from determination of input data for statistical fracture network analysis from the real data(data of fracture network, data of hydraulic tests). The variation of permeability and mean anisotropic permeability coefficients are calculated from the realized model by increasing the size. As a result of analysis, a strong anisotropy of permeability is observed according to the direction of the fracture sets around the test tunnel.

• Tunnel and Underground Space
• /
• v.10 no.3
• /
• pp.378-386
• /
• 2000

This paper presents groundwater flow characteristics in discontinuous rock mass using fracture network program(NAPSAC) by statistical approach. Equivalent permeability coefficients are estimated from borehole data around Mabuk test tunnel site and fracture map on the arch of the tunnel. The reliability of fracture network model is obtained from determination of input data for statistical fracture network analysis from the real data(data of fracture network, data of hydraulic tests). The variation of permeability and mean anisotropic permeability coefficients are calculated from the realized model by increasing the size. As a result of analysis, a strong anisotropy of permeability is observed according to the direction of the fracture sets around the test tunnel.

• Tunnel and Underground Space
• /
• v.18 no.5
• /
• pp.355-365
• /
• 2008

Displacement caused by tunneling is difficult to predict since it is affected by many factors such as ground condition, excavation method and supplementary method of reinforcement. In this study, horizontal inclinometer was employed to monitor ground settlements above a tunnel face before and after the excavation. Monitoring results were analyzed to predict the preceding displacement and settlement of the surface structures. The result of the analysis can be used to establish a proper counter measure which keeps the serviceability of the surface structures. Based on the analysis of the monitoring result, ground properties of the site were deduced and the influence of the tunnel excavation on the settlement of the foundation above the tunnel is analyzed.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.43 no.6
• /
• pp.785-791
• /
• 2023

Risk management is essential for preventing accidents arising from uncertainties in TBM tunnel projects, especially concerning managing the risk of TBM tunnel collapse, which can cause extensive damage from the tunnel face to the ground surface. In addition, prioritizing risks is necessary to allocate resources efficiently within time and cost constraints. Therefore, this study aimed to establish a TBM risk database through case studies of TBM accidents and determine a risk priority for TBM tunnel collapse using the Bayes theorem. The database consisted of 87 cases, dealing with three accidents and five geological sources. Applying the Bayes theorem to the database, it was found that fault zones and weak ground significantly increased the probability of tunnel collapse, while the other sources showed low correlations with collapse. Therefore, the risk priority for TBM tunnel collapse, considering geological sources, is as follows: 1) Fault zone, 2) Weak ground, 3) Mixed ground, 4) High in-situ stress, and 5) Expansive ground. In practice, the derived risk priority can serve as a valuable reference for risk management, enhancing the safety and efficiency of TBM construction. It provides guidance for developing appropriate countermeasure plans and allocating resources effectively to mitigate the risk of TBM tunnel collapse.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.6 no.3
• /
• pp.247-258
• /
• 2004

Two 3-dimensional data processing techniques to predict the fractured zone ahead of a tunnel face by the tunnel seismic survey were proposed so that the geometric formation of the fractured zone could be estimated. The first 3-dimensional data processing technique was developed based on the principle of ellipsoid, The input data needed for the 3D migration can be obtained from the 2-dimensional tunnel seismic prediction (TSP) test where the TSP test should be performed in each sidewall of a tunnel. The second 3-dimensional migration technique that was developed based on the concept of wave travel plane was proposed. This technique can be applied when the TSP is operated with sources in one sidewall of a tunnel while the receivers are installed in both sidewalls. New migration technique was applied to an in-situ tunnelling site. The 3-dimensional migration was performed using measured TSP data and its results were compared with the geological investigation results that were monitored during tunnel construction. This comparison revealed that the proposed migration technique could reconstruct the discontinuity planes reasonably well.

• Tunnel and Underground Space
• /
• v.25 no.6
• /
• pp.515-526
• /
• 2015

Predicting and measuring tunnel convergence is very crucial for estimating tunnel stability and economical construction of NATM tunnels. The method to estimate the tunnel convergence that occurs before and after construction is proposed based on literature reviews. The total displacement occurring related to tunnel construction is determined to be about 2.5 times that of measured displacements. The results of displacement measurements at two tunnels constructed with similar rock types are examined for the investigation of factors affecting the tunnel convergence. The average convergence of Gyungju A Tunnel is about 6.7 times bigger than that of Daejeon B Tunnel. The possible causes of the large convergence in Gyungju A Tunnel are suggested. In order to predict the convergence of tunnels, careful investigation of the geological structures in the ground surface and the influence of external conditions as well as careful face mapping of the tunnel face should be conducted.