• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1986.11a
• /
• pp.29-41
• /
• 1986

마찰계수는 서로 접촉하여 운동하는 두 물체간의 특성으로 간주되며 일반적으로 상대속도나 작용하중에 별로 영향을 받지 않는 것으로 알려져 있다. 화학적으로나 물리적으로 오염되지 않은 깨끗한 금속간의 마찰실험의 경우, 이 실험이 불활성 가스나 진공내에서 행해질 경우 상당히 큰 마찰저항을 경험하게 되나, 공기중에서의 실험에서는 작은 마찰저항이 기록되어 산화막이나 다른 오염물에 의해 형성된 막이 마찰저항을 감소시킨다고 보고 있다.

• The Korean Journal of Rheology
• /
• v.3 no.1
• /
• pp.76-85
• /
• 1991

적은양의 분자량이 큰선형 고부자를 수용액에 첨가함으로서 얻어지는 마찰저항가소 연구가 rotating disk 장치를 이용해 수행되었다. 마찰저항 감소제로 poly(ethylene oxide)와 poly(acrylamide)를 사용하였으며 고분자 분자량 고분자 농도, disk 의 회전속도 및 온도 등 여러 가지 인자에 대한 마찰정항감소의 의존성을 연구하였다. 또한 마찰저항 감소 효과와 고분자 용액의 점도평균 분자량을 동시에 측정함으로서 고분자 퇴화에 대한 연구도 수행하 였다. 마찰저항감소는 고분자 농도가 증가함에 따라 임계농도에 도달할때까지 증가하였고 낮은 농도에서는 분자량이 큰 고분자일수록 더욱 큰 마찰저항 감소효과를 나타내었다. 마찰 감소 진행 중의 높은 전단력에 기인하는 고분자의 분해는 고분자 농도가 낮은데에서 더욱두 드러지게 나타났으며 온도 효과의 연구로부터 poly(acrylamide)가 poly(ethylene oxide)보다 열적으로 안정함을 알수 있었다.

• Journal of Power System Engineering
• /
• v.16 no.6
• /
• pp.11-18
• /
• 2012

대형 상용 엔진에서 발생하는 유효 도시 마력의 약 4~15%는 마찰 손실을 통해서 사라지며 마찰 손실 중 약 40~55%는 엔진 실린더와 피스톤 사이의 마찰에 의하여 발생하여, 엔진 전체에서 발생하는 마찰 손실 중 가장 많은 부분을 차지하고 있다. 이 연구에서는 엔진 실린더 라이너의 온도 분포 개선을 통해 라이너를 따라 유막을 형성하고 있는 윤활유의 적정 점성을 유지시키는 방법을 제시하고자 한다. 피스톤-라이너에서 발생하는 마찰 특성은 피스톤의 행정 위치에 따라서 접촉 마찰과 유막에 의한 마찰로 구분되며 이에 따라 요구되는 윤활유의 점성 특성 또한 달라진다. 먼저 해석 모델을 통하여 실린더 라이너 내부 온도 분포 특성을 확인한 후 피스톤 마찰 특성을 고려한 적정 온도 분포를 고찰하며 실린더 라이너에 열저항 코팅을 통해서 이를 구현하였다. 또한 실린더-피스톤 간의 마찰/윤활 해석을 통하여 열저항 코팅의 마찰 개선효과를 확인하였다.

• The Journal of Engineering Geology
• /
• v.8 no.3
• /
• pp.235-245
• /
• 1998

Adquate friction resistance is needed to prevent pavement slipperiness and to allow vehicles to stop in a reasonable distance. Performance of the aggregates is reduced over time by wear and polishing as a consequence of vehicular traffic. In this research, the objective was to develop a laboratory method to test Indiana gravel aggregates to predict field performance, and determine causes for the range of values amang gravel aggregates. The assessment of gravel sources was primarily on the basis of individual rock types and those proportions comprising the gravel. Polish and friction values were determined in the laboratory with the British Wheel and Pendulum. The gravels of this study were composed primarily of carbonate aggregates that showed considerable variability in polishing thresholds. Igneous and metamorphic constituents polished to a lesser degree and are expected to improve overall aggregate performance. Estimates of the IFV (Initial Friction Value) and PV (Polished Value) for crushed gravel samples can be made based on the percentage of rock types present in the sample. A weighted average is used to make this calculation.

• The korean journal of orthodontics
• /
• v.36 no.3 s.116
• /
• pp.207-217
• /
• 2006

Although ceramic brackets have been used widely for improved esthetics during treatment, ceramic brackets have some inherent problems; brittleness, attrition of the opposing teeth and high frictional resistance. This study was performed to understand the frictional resistance of the ceramic brackets, as well as to be a helpful reference for finding the solutions to the problem of frictional resistance. Three different kinds of brackets were used; metal bracket, polycrystalline ceramic brackets with a metal slot to reduce the high frictional resistance and monocrystalline ceramic brackets. The brackets were tested with a $.019{\times}.025$ stainless steel wire with a second order angulation of $0^{\circ}\;and\;10^{\circ}$, and the static and kinetic frictional forces were measured on the universal testing machine. The results of this study showed that the ceramic brackets, especially the monocrystalline ceramic bracket without a metal slot, generated higher frictional resistance than the metal bracket, and the frictional resistance was increased as the angulation between the bracket slot and the wire increased. Therefore, the development of the ceramic bracket with reduced frictional resistance and the prevention of excessive crown tipping during orthodontic treatment will lead to the simultaneous attainment of more efficient and improved esthetic treatment goals.

• The korean journal of orthodontics
• /
• v.37 no.5
• /
• pp.376-385
• /
• 2007

Esthetic brackets which resemble the color of natural teeth have been widely used. But the frictional resistance of ceramic brackets, a typical esthetic bracket, is greater than that of metal brackets. The purpose of this study was to measure the frictional resistance of the new calcium phosphate brackets (CPB) which were recently developed and to evaluate its clinical usability by comparing the frictional differences of CPB with metal brackets and metal slot inserted ceramic brackets. Methods: Experimental groups were CPB (Hyaline II, Tomy, Tokyo, Japan), metal bracket (Kosaka, Tomy, Tokyo, Japan) and metal slot inserted ceramic bracket (Clarity, 3M Unitek, Monrovia, CA, USA). All of the brackets had 0.022-inch slot sizes. The brackets were tested with $0.019\;{\times}\;0.025$ inch stainless steel wire (3M Unitek, Monrovia, CA, USA). A biologic model was used to simulate the situation which would occur during orthodontic treatment with fixed appliances. Retraction force was applied at a speed of 5 mm/min for 30 seconds. The frictional resistance was measured on a universal testing machine (Instron 4467, Instron, Norwood, MA, USA). Results: CPB showed significantly higher friction than metal brackets (p < 0.05) and lower friction than metal slot inserted ceramic brackets (p < 0.01). Conclusions: CPB can be considered to be a useful orthodontic esthetic bracket with respect to frictional resistance, as its friction is remarkably lower than that of metal slot inserted ceramic brackets.

• Solar Energy
• /
• v.17 no.4
• /
• pp.13-22
• /
• 1997

Drag reduction produced by the dilute solution of polymer under turbulent flow in a rotating disk apparatus(RDA) was investigated in this study for the purpose of potential application to the Ocean Thermal Energy Conversion(OTEC) system. Four different molecular weights of poly(ethylene oxide)(PEO) were used as drag reducing additives, and synthetic seawater was adopted as a solvent. Experiments were undertaken to observe the dependence of drag reduction on various factors such as polymer molecular weight, polymer concentration and the rotating speed of the disk. The concentration dependence on the drag reduction of this polymer system was shown to obey an empirical drag reduction equation of the Virk's universal correlation.

• Journal of the Korean Geotechnical Society
• /
• v.36 no.11
• /
• pp.107-117
• /
• 2020

Open-ended steel pipe piles have outside frictional force and inside frictional resistance in which blocked soil acts on the inside of the steel pipe during installation. It is expected that the ultimate load will change depending on the inside and outside resistance. And, if the ground on which the piles were constructed is clay soil, it is predicted that it will have effect on the negative skin friction caused by the ground settlement. Therefore, in this study, the behavior according to the inside and outside resistance characteristics of steel pipe piles was analyzed numerically, and the frictional force distribution, axial load and settlements before and after the occurrence of ground settlement were calculated. As a result of the analysis, the inside frictional resistance had less influence than the outside frictional resistance. However, inside frictional resistance is considered to be one of the important factors considering the effect on the overall pile behavior, and both resistance factors need to be considered in the design process.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1988.06a
• /
• pp.31-38
• /
• 1988

최근, 유체윤활영역에 있어서 될수 있는 한 점성저항을 감소시키기 위해서 윤활유의 저점도화가 진행되고 있는 실정이다. 그러나 윤활유의 저점도화로 인한 문제점으로써 금속-금속간 접식부가 증가하게 된다. 금속간 접식이 증가함에 따라 마찰저항이 커지게 되며, 이와 같은 마찰저항의 증대를 방지하기 위하여 마찰조정제(FM)가 자동차 엔진유를 비롯한 각종 윤활유에 첨가되어지고 있다. 또한 윤활유의 사용조건이 가곡(고온, 고가중) 해짐에 따라 첨가제의 다기능성이 요구되고 있는 가운데, 이와 같은 요구를 만족시켜 주기 위한 연구가 진행되고 있다. 최근에 와서 유용성 유기모리브덴계 화합물이 마찰,마모 및 산화방지제로서 주목받고 있다. 마찰, 마모을 감소시키기 위한 목적으로 널리 사용되고 있는 $MoS_2$는 고체윤활제로서 각광을 받고 있지만, 실제사용상의 문제로서 입자의 크기, 분산상의 문제 및 분산제와의 반응으로 인하여 마찰, 마모를 증대시키므로 역효과를 가져 오기도 한다. $MoS_2$와 같은 고체윤활제의 분상상의 무제점을 보완한 유용성 모리브덴계 화합물은 마찰, 마모 및 산화방지제로서 자동차 엔진유를 비롯하여 각종 윤활유에 첨가되고는 있지만 메카니즘에 대해서는 거의 해명되고 있지 않는 현실정이다. 본 연구는 유용성 유기모리브덴계 화합물중의 Molybdenum dialkyl dithiophosphate (MoDTP)의 마찰감소작용을 해명하기 위해서, MoDTP 첨가제의 마찰시험 및 마찰표면의 분석을 통하여 MoDTP의 마찰감소작용의 메카니즘을 명확하게 함을 자적으로 하고 있다.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.2
• /
• pp.246-252
• /
• 2018

In this paper, the friction drag force of 3D submerged body is investigated by considering the surface roughness, the first grid height, and the Reynolds number using open CFD source code, OpenFOAM 4.0. A procedure for estimating drag components by CFD code is set up and suggested in this study. In the 3D submerged body, because of the form factor in the 3D computations, the friction resistance with the small roughness of $12{\mu}m$ obtains different result with the smooth wall. As the Reynolds number increased, the boundary layer becomes thinner and the fiction resistance tends to decrease. In the computations for the effect of y+, the friction resistance and wall shear stress are excessively predicted when the y+ value deviates from the log layer. This is presumably because the boundary layer becomes thicker and the turbulence energy is excessively predicted in the nose due to the increase in y+ value. As the roughness increases, the boundary layer becomes thicker and the turbulence kinetic energy on the surface increases. From this study, the drag estimation method, considering the roughness by numerical analysis for ships or offshore structures, can be provided by using the suggested the y+ value and surface roughness with wall function.